End the Electrical Headaches in Your GM Truck or SUV
Are you dealing with a cascade of frustrating electrical issues in your GMC Yukon, Chevy Silverado, or Tahoe? One moment the A/C works, the next it doesn’t. The power windows have a mind of their own, and a persistent airbag light is staring you down. These aren’t separate problems—they’re classic signs of a failing Body Control Module (BCM). This vital component is the central hub for your vehicle’s body electronics, and when it falters, it can make your reliable truck feel unpredictable. Put an end to the guesswork and restore your vehicle’s proper function with this expertly pre-programmed BCM.
Common Symptoms & Your Solution
A faulty BCM can manifest in numerous ways, turning your daily drive into a constant source of annoyance. This module is the definitive solution if you’re experiencing:
- Intermittent or complete loss of HVAC and climate control functions.
- Power windows, door locks, or exterior/interior lights not working correctly.
- An airbag warning light on the dash, often with DTC B1001.
- Security system malfunctions, causing no-start or stalling conditions.
- A variety of seemingly unrelated diagnostic trouble codes (DTCs).
Instead of paying for expensive diagnostic time and dealership programming fees, this pre-configured 2007-2011 GMC Yukon Programmed BCM arrives ready for a straightforward, plug-and-play installation, getting you back on the road with confidence.
Features & Tangible Benefits
- ✔ VIN-Programmed for Your Vehicle: We program the module to your specific VIN before shipping. This ensures perfect communication with your vehicle’s other systems right out of the box, eliminating the need for a costly trip to the dealership.
- ✔ Restores Full Functionality: Regain complete and reliable control over your power windows, door locks, lighting, security system, wipers, and HVAC. Enjoy your vehicle’s comfort and convenience features once again.
- ✔ Built to OEM Standards: Engineered for durability and performance, this module meets or exceeds original equipment specifications, ensuring it can handle the demands of a hard-working truck or family SUV.
- ✔ Direct-Fit Interchange: This module is a direct replacement for a wide range of part numbers, including 25971916, 25844480, 25835966, 20939137, and 22860591, guaranteeing a perfect fit.
- ✔ Warranty Protection: This unit is backed by our one-year replacement warranty.
Expert Insight: The Grounding Connection
As a veteran technician, I’ve seen countless GMT900 platform trucks (like your Yukon, Sierra, and Silverado) where a poor ground connection was the root cause or a contributing factor to BCM failure. The main BCM ground is typically located on the driver-side A-pillar, near the emergency brake pedal. Before installing your new BCM, take 10 extra minutes to locate this ground, remove the bolt, and clean the contact surfaces with a wire brush until they’re shiny. This simple step ensures the new module has a solid connection, preventing voltage spikes and premature failure. It’s the professional’s secret to a lasting repair.
By choosing this expertly prepared module, you’re not just buying a part; you’re investing in a permanent solution. This is the same high-quality repair we would perform in our own service bay. Take control of your vehicle’s health and install the reliable 2007-2011 GMC Yukon Programmed BCM that will restore its performance for years to come. Your vehicle is too important to trust to anything less.
Frequently Asked Questions
What does a Body Control Module (BCM) do?
The BCM acts as the central computer for your vehicle’s body electronics. It controls non-engine related functions like power windows, door locks, interior and exterior lights, the security system, HVAC blower, and wipers.
Is this module difficult to install?
Installation is very straightforward for most DIYers. The BCM is typically located under the driver-side dashboard near the steering column. It usually takes less than 5 minutes to unplug the old unit and plug in the new one. No special tools are required for the swap itself.
Why is VIN programming so important?
VIN programming loads your vehicle’s specific software and options into the BCM. Without it, the module won’t know how to communicate with other computers in your truck, leading to incorrect operation of features or a complete failure to function. Our pre-programming saves you a mandatory, and often expensive, trip to the dealer.
What if my airbag light stays on after installation?
In some cases, particularly if DTC B1001 was present, the new BCM needs to be electronically introduced to the airbag system (SDM). This is done via a ‘Setup SDM Primary Key in BCM’ procedure using a professional-grade scan tool. This is a simple reset that a local repair shop can perform if needed.
Will this fix my specific electrical problem?
This 2007-2011 GMC Yukon Programmed BCM is the direct solution for the most common electrical issues found in these vehicles, including failures in the HVAC, lighting, and power accessory systems. It is designed to resolve the symptoms listed above.
Do I need to send my old part back?
No. We do not require a core return for this part. You can keep your old module, which means no core charge and no hassle of shipping a part back to us.