2002-2006 Avalanche 2500 BCM | VIN Programmed Body Control Module | 15137395

End Electrical Frustration for Good

Tired of unpredictable lights, locks, and windows in your truck? Regain confidence with a Body Control Module that’s pre-programmed for your exact VIN. Enjoy a simple, hassle-free installation and get your vehicle back to dependable, working order. Get the reliable fix you need now.

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01130-222 Categories: ,
Guaranteed Safe Checkout

Is Your Avalanche Plagued by Bizarre Electrical Problems?

If you’re dealing with a frustrating mix of flickering lights, unresponsive power windows, a malfunctioning security system, or an HVAC system with a mind of its own, the culprit is likely a failing Body Control Module (BCM). In a workhorse like the Chevy Avalanche 2500, these aren’t just annoyancesโ€”they’re problems that can disrupt your workday and compromise your vehicle’s reliability. It’s time to stop chasing electrical gremlins and install a permanent, hassle-free solution.

Common Symptoms & Your Solution

A faulty BCM can trigger a cascade of issues that may seem unrelated. This VIN-programmed module is the definitive solution if your truck is experiencing any of the following:

  • Intermittent or Dead Accessories: Power windows, door locks, and interior/exterior lights that work one minute and not the next.
  • HVAC Control Failure: Inability to adjust temperature, fan speed, or air direction.
  • Warning Lights: An illuminated airbag light, often accompanied by diagnostic trouble codes (DTCs) like B1001.
  • Security System Malfunctions: False alarms, or a no-start condition where the engine won’t crank due to a security lockout.
  • Erratic Wiper Operation: Wipers that won’t turn on, won’t turn off, or operate at the wrong speed.

This module is engineered to restore full functionality, providing a stable and reliable command center for all your truck’s body electronics. By installing our pre-programmed 2002-2006 Avalanche 2500 BCM, you’re not just replacing a part; you’re restoring your vehicle’s core dependability.

Features & Tangible Benefits

  • โœ” 100% Plug-and-Play Installation: This module arrives pre-programmed to your vehicle’s specific VIN. This crucial step eliminates the need for an expensive trip to the dealership for programming, saving you time and money.
  • โœ” Restores Full Functionality: Regain complete and reliable control over your lights, locks, windows, HVAC, and security systems for a safer and more comfortable driving experience.
  • โœ” OEM-Standard Quality: Built to meet or exceed original equipment specifications, ensuring a perfect fit and long-lasting performance, whether you’re on the job site or on a family trip.
  • โœ” No Core Charge Required: We don’t require you to send your old part back. This simplifies the process and gets your truck back on the road faster, without any hidden fees or return hassles.
  • โœ” Broad GM Compatibility: While perfect for the Avalanche, this BCM is also a direct-fit solution for a wide range of GM trucks and SUVs, including the Silverado, Sierra, Tahoe, Suburban, and Escalade.
  • โœ” Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.

From the Technician’s Bench: We see these early 2000s GM trucks all the time. A customer will come in after spending hundreds on diagnostics, chasing what they think are separate issues with the windows, then the radio, then the security system. In nine out of ten cases, it’s the BCM. The real value of a VIN-programmed unit is confidence. You’re not just throwing a part at the problem; you’re installing a component that’s already been digitally matched to your truck’s specific configuration. It’s the closest you can get to a factory-fresh fix without the dealership price tag.

Important Post-Installation Information

While installation is straightforward, some vehicle systems may require a recalibration or sync procedure after the new BCM is installed. Please be aware of the following potential steps:

  • Airbag System Sync: If the airbag warning light remains on, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be necessary to ensure correct brake light operation.

Always consult your vehicle’s service manual or a qualified technician if you are unsure about these procedures.

Frequently Asked Questions

What does ‘VIN Programmed’ actually mean?

It means we load your vehicle’s unique 17-digit Vehicle Identification Number (VIN) and all associated factory software onto the module before we ship it. This ensures it communicates perfectly with your truck’s other computers (like the ECU and TCU) right out of the box, just like the original part did.

Is this a difficult part to install myself?

For most DIYers, this is a very manageable job. The BCM is typically located under the steering column or behind the center dash panel. The process usually involves disconnecting the battery, removing a few trim panels, and swapping the electrical connectors. It often takes less than 30 minutes with basic hand tools.

Will this fix my specific electrical issue?

This module is the central controller for most non-engine related electronics. If you are experiencing multiple, seemingly random electrical problems as listed in the symptoms section, a failing BCM is the most common cause. This part is designed to be the definitive fix for those issues.

Do I need to send my old BCM back?

No. There is no core charge or requirement to return your original module. You can keep it or dispose of it at your convenience, making the repair process simpler for you.

What if the airbag light stays on after installing the new 2002-2006 Avalanche 2500 BCM?

This is a normal security measure in GM vehicles. The new BCM needs to be electronically ‘introduced’ to the airbag’s computer (SDM). A repair shop with a professional-grade scan tool can perform the “Setup SDM Primary Key in BCM” procedure in a few minutes to turn off the light.

Conditions & Options

Programmed to your VIN GM: 15116066

Year
Genuine OEM

Yes

MPN

15137395

Interchange part number

Condition

Refurbished

PartNumber

591

Model

Avalanche 2500

Make

Year

2006

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , , , , , ,

Scroll to Top