2000 Suburban 2500 PCM 09354896 | Programmed to Your VIN for Easy Install

Get Your Suburban Running Right Again!

This is a direct-fit, VIN-programmed Powertrain Control Module (PCM) for your 2000 Suburban 2500. It arrives ready to install, solving common issues like check engine lights, poor performance, and shifting problems. Order today to restore your truck’s reliability.

$124.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-05457-17 Categories: ,
Guaranteed Safe Checkout

End the Frustration and Restore Your Truck’s Performance

Is your Chevrolet or GMC truck plagued by a persistent check engine light, erratic shifting, or a frustrating no-start condition? A failing Powertrain Control Module (PCM) is often the hidden culprit behind these baffling issues, acting as the brain of your vehicle’s engine and transmission. When it falters, the entire system suffers. This module is the definitive, reliable solution to bring your vehicle back to its peak operational state. We take the guesswork out of the repair by programming this unit specifically to your vehicle’s VIN with the latest GM software updates before it even leaves our facility. This ensures a seamless installation process and restores the dependable performance you rely on every day.

Warning Signs and How to Overcome Them

If you’re experiencing any of the following symptoms, a failing PCM is a likely cause. Replacing it with this pre-programmed unit can resolve these issues and give you back a vehicle you can trust.

  • ✔ Stubborn Check Engine Light (CEL) with communication-related Diagnostic Trouble Codes (DTCs) like P0601, P0602, or P0606.
  • ✔ A sudden and unexplained drop in fuel economy.
  • ✔ Harsh, delayed, or incorrect gear shifting from the transmission.
  • ✔ Engine stalling, stumbling, or running rough at idle.
  • ✔ Complete no-start or intermittent starting problems where the engine cranks but won’t fire.
  • ✔ Failure to pass state emissions inspections.
  • ✔ The confidence of knowing your vehicle’s core computer is functioning perfectly.

An Expert’s Note on Diagnostics

Before condemning the PCM, always ensure your battery is fully charged and the terminals are clean and tight. Low voltage can mimic PCM failure and cause a host of confusing electrical gremlins. A simple check can save you hours of diagnostic time and confirm you’re replacing the right part for the right reason.

Guided Installation for a Confident Fix: Your 2000 Suburban 2500 PCM

Installing your new computer is a straightforward process designed to get you back on the road quickly. Follow these steps for a successful replacement. Remember, this module is located on the driver’s side of the engine bay, just below the battery.

  1. Safety First: Begin by disconnecting the negative terminal of your vehicle’s battery to prevent any electrical shorts.
  2. Access the Module: You may need to remove the battery to gain clear access to the PCM and its mounting bracket.
  3. Disconnect Wiring: Carefully unplug the electrical connectors from the old PCM. These connectors have locking tabs that need to be released; never force them.
  4. Remove the Old Unit: Unbolt the PCM from its mounting bracket and remove it from the vehicle.
  5. Install the New PCM: Mount your new, VIN-programmed PCM securely onto the bracket.
  6. Reconnect and Secure: Plug the wiring harnesses back into the new module, ensuring they click firmly into place. Reinstall the battery if you removed it.
  7. Final Steps: Reconnect the negative battery terminal. In many cases, the vehicle will start and run perfectly. Some GM vehicles may require a simple security relearn procedure (often called a Passlock or Passkey relearn), which typically involves turning the key to the ‘ON’ position for 10-15 minutes. Consult your owner’s manual or a reliable online resource for your specific model’s procedure.

Tailored Fit for Your Ride

This module is a direct-fit replacement, guaranteed to be compatible with the following vehicles and options. It replaces part numbers 19109040, 09354896, and 9354896.

  • CAMARO 99-00 Electronic Control Module; (behind RH strut tower), (5.7L)
  • CAMARO 01-02 Electronic Control Module; (behind RH strut tower), 5.7L, ID 9354896
  • CORVETTE 99-00 Electronic Control Module; (RH engine compartment)
  • FIREBIRD 99 Electronic Control Module; (behind RH strut tower), (5.7L)
  • FIREBIRD 00 Electronic Control Module; (behind RH strut tower), 5.7L
  • FIREBIRD 01-02 Electronic Control Module; (behind RH strut tower), 5.7L, ID 9354896
  • SIERRA 1500 PICKUP 99-00 Electronic Control Module; (LH front under battery), 8 cylinder
  • SIERRA 2500 PICKUP 99-00 Electronic Control Module; (LH front under battery)
  • SILVERADO 1500 PICKUP 99-00 Electronic Control Module; (LH front under battery), 8 cylinder
  • SILVERADO 2500 PICKUP 99-00 Electronic Control Module; (LH front under battery)
  • SUBURBAN 1500 00 Electronic Control Module; (LH front under battery)
  • SUBURBAN 2500 00 Electronic Control Module; (LH front under battery)
  • TAHOE 00 Electronic Control Module; Silverado style (LH front below battery)
  • YUKON 00 Electronic Control Module; (LH front under battery), exc. Denali
  • YUKON XL 1500 00 Electronic Control Module; (LH front under battery)
  • YUKON XL 2500 00 Electronic Control Module; (LH front under battery)

Frequently Asked Questions

What information do you need from me after I order?

After your purchase, we require your vehicle’s 17-digit Vehicle Identification Number (VIN). This allows us to program the module with the exact software and calibrations for your truck’s specific options, ensuring perfect compatibility.

Is this module truly “plug and play”?

Yes, because we program it to your VIN, it is ready for installation right out of the box. In some cases, a simple security relearn procedure may be necessary, which you can typically do yourself in about 15 minutes with just the ignition key.

Where can I find my VIN?

Your VIN can be found on a metal tag on the driver’s side of the dashboard (visible through the windshield), on the driver’s side door jamb sticker, or on your vehicle’s registration and insurance documents.

Will this fix my specific problem?

This PCM is designed to resolve issues directly caused by a faulty module, such as internal processor faults (e.g., code P0601), communication errors, and erratic engine or transmission behavior. While it is a very common solution, we always recommend proper diagnostics to confirm the PCM is the root cause of your vehicle’s symptoms.

What if I install it and still have issues?

If problems persist after installation, it’s possible there is another underlying issue with the vehicle, such as a faulty sensor or wiring problem. The new PCM will help rule out the vehicle’s main computer as the source, allowing you or your mechanic to diagnose other potential causes more effectively.

Condition

Refurbished

Year

MPN

09354896

Conditions & Options

Programmed to your VIN GM: 09354896

Genuine OEM

Yes

PartNumber

590

Model

Suburban 2500

Year

2000

Brand

GM

Manufacturer Part Number

, ,

Interchange part number

Scroll to Top