Get Your Work Van Back on the Road, Fast.
Is your Chevrolet Express 3500 suffering from baffling electrical issues? Flickering lights, unresponsive power windows and locks, or a dashboard that’s lit up with random warnings can bring your work to a grinding halt. These are classic signs of a failing Body Control Module (BCM), the central command center for your van’s body electronics. Don’t let a faulty module cost you another day of productivity. This is the direct, reliable solution to restore full functionality and get you back on the job.
Common Symptoms & Your Solution
A failing BCM can cause a wide range of frustrating problems. If you’re experiencing intermittent or constant issues like power locks activating on their own, interior lights not working, security system faults, or communication errors with diagnostic tools, your BCM is the likely culprit. This module is the definitive fix, arriving pre-programmed specifically for your vehicle. We use your VIN to flash the unit with the latest official GM software, ensuring it integrates seamlessly with your van’s existing systems. This is the most efficient way to solve the problem correctly, without the time and expense of a dealership visit for programming. This is the solution for a reliable Programmed 2008-2012 Express 3500 Body Control Module.
Features & Benefits
- ✔ Plug & Play Installation: This module is pre-programmed to your vehicle’s exact VIN. No dealership visit or expensive scan tools are required for programming, saving you time and money.
- ✔ Restored Factory Performance: Flashed with the newest updates from GM, this BCM restores your vehicle’s electronics to their original, reliable operating condition.
- ✔ Guaranteed Fitment: A direct replacement for a wide range of original part numbers, including 15819552, 22860591, 25892622, and many more, ensuring compatibility with your vehicle.
- ✔ No Core Charge: Keep your old module. There’s no core charge and no need to hassle with shipping your old, faulty part back to us.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty. Drive with confidence knowing your purchase is protected.
Expert Insight: Avoid the Dealership Programming Trap
Many owners and even some repair shops buy a used BCM online, only to discover it’s a paperweight without proper programming. This leads to a dead vehicle, a tow bill, and several hundred dollars in dealership labor fees to get the module programmed. We eliminate that entire costly and time-consuming process. By providing us with your VIN during checkout, you receive a Programmed 2008-2012 Express 3500 Body Control Module that is truly ready for installation right out of the box. That’s the difference between a quick repair and a week-long headache.
Frequently Asked Questions
How does the programming process work?
It’s simple. After you complete your purchase, you provide us with your vehicle’s 17-digit VIN. Our technicians then use that VIN to load the correct, updated GM software onto the Body Control Module before it ships. This ensures it’s a perfect match for your vehicle’s specific options and systems.
Is this a simple plug-and-play installation?
Yes, for the vast majority of vehicles. Because the module arrives pre-programmed, the physical installation is a direct swap. You simply disconnect the battery, remove the old BCM, install the new one, and reconnect the battery. However, please review the potential post-installation procedures noted in our listing.
What if my original part number isn’t 15819552?
No problem. This BCM is a direct replacement for the extensive list of part numbers shown in the description. As long as your original part number is on that list, this module will work perfectly once programmed to your VIN.
Will I need to perform any procedures after installation?
In some cases, yes. Depending on your specific vehicle, a ‘Brake Pedal Position Relearn’ or an ‘Airbag System Sync’ (also called ‘Setup SDM Primary Key in BCM’) may be required. These procedures often require a professional-grade scan tool to complete.
What happens if my airbag light comes on after installation?
If the airbag warning light is on, it means the BCM needs to be synchronized with the airbag system’s SDM (Sensing and Diagnostic Module). A qualified technician will need to perform the ‘Setup SDM Primary Key in BCM’ procedure with a diagnostic tool to resolve this.
Do I need to send my old BCM back?
No. We do not require you to return your original module. There is no core charge associated with this purchase, saving you the time and expense of a return shipment.
