Programmed 2009 Enclave Fuel Pump Module 13501024 | VIN Matched

Restore Power & Reliability to Your GM Vehicle

Tired of stalling, hesitation, or no-start issues? This Fuel Pump Control Module (FPCM) is the fix. It arrives pre-programmed to your vehicle’s VIN, eliminating the need for a costly dealer visit. A true plug-and-play solution for dozens of GM models. Get your vehicle running right. Order today!

$244.95

+11.99 USPS Priority Shipping

Availability: Only 2 left in stock



SKU: 591-01466-10 Categories: ,
Guaranteed Safe Checkout

Is Your GM Vehicle Stalling, Hesitating, or Refusing to Start?

If you’re experiencing frustrating engine problems like sudden stalling at a stoplight, poor acceleration, or a crank-no-start condition, the culprit is often a failing Fuel Pump Control Module (FPCM). As a technician with over 20 years of experience, I’ve seen this exact issue hundreds of times on vehicles like the Chevy Silverado, GMC Acadia, and Buick Enclave. The FPCM is the electronic brain that tells your fuel pump how much pressure to deliver. When it fails, your engine is starved of the fuel it needs to run properly.

The Smart Solution: A VIN-Programmed FPCM

Forget the expensive trip to the dealership. This Fuel Pump Control Module arrives at your door completely programmed with the latest GM software, specifically matched to your vehicle’s VIN. You simply provide us with your VIN at checkout, and we handle the complex programming for you. This means no extra tools, no subscription fees, and no appointment needed. It’s a true plug-and-play fix that gets you back on the road quickly and affordably.

Expert Real-World Scenario: “A customer’s 2008 Tahoe came into my shop last month with an intermittent no-start condition that had two other shops stumped. They had already replaced the fuel pump, but the problem persisted. A quick scan showed a P069E code, pointing to the FPCM. These modules are notorious for failing due to heat and vibration, especially when mounted on the frame rail. We installed one of our pre-programmed modules, and the Tahoe has been running perfectly ever since. The customer saved hundreds by not having to pay for another diagnostic fee or dealer programming.”

Symptoms of a Failing Fuel Pump Control Module:

  • ✔ Engine stalls unexpectedly, especially at low speeds or idle
  • ✔ Vehicle cranks but will not start
  • ✔ Hesitation or stumbling during acceleration
  • ✔ Reduced engine power and poor fuel economy
  • ✔ Check Engine Light with codes like P069E, P0230, or U0109

Why Choose Our Programmed 2009 Enclave Fuel Pump Module?

This isn’t just a replacement part; it’s a complete solution. By installing a module with the most current software, you’re not just fixing the immediate problem—you’re also getting the benefit of all subsequent improvements and stability fixes released by GM. This ensures optimal performance and longevity for your fuel system. This module is a direct replacement for multiple part numbers, including 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325.

Plug-and-Play Installation: Get Back on the Road Fast

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery.
  2. Locate the Module: Find the old FPCM. Common locations are on the driver’s side frame rail (most trucks/SUVs), on a rear crossmember (Traverse), or inside the rear of the engine compartment (Vue). Check your specific model’s service information if unsure.
  3. Disconnect and Remove: Carefully unplug the electrical connectors. Use a small screwdriver to release the locking tabs if necessary. Then, unbolt the module from its mounting location.
  4. Install the New Module: Bolt your new, pre-programmed module into place.
  5. Reconnect: Firmly plug in the electrical connectors until they click. Reconnect the negative battery terminal.
  6. Prime the System: Turn the key to the ‘On’ position (without starting the engine) for 5-10 seconds to allow the fuel pump to prime. Turn the key off, then start the vehicle. Your repair is complete.

Guaranteed Fitment for a Wide Range of GM Vehicles

This module is engineered to be a perfect fit and function replacement for a vast array of GM models. If you own one of the following vehicles and are experiencing fuel delivery issues, this is the part you need:

  • Buick Enclave (2009)
  • Cadillac Escalade, ESV, EXT (2008-2009)
  • Chevrolet Avalanche, Silverado, Tahoe, Suburban 1500 (2007-2009)
  • Chevrolet Colorado, Traverse (2009)
  • Chevrolet Express / GMC Savana 1500 Van (2008-2009)
  • GMC Acadia, Sierra 1500, Sierra Denali, Yukon, Yukon XL 1500 (2007-2009)
  • GMC Canyon (2009)
  • Hummer H2, H3 (2008-2009)
  • Saturn Outlook (2009), Saturn Vue (2008-2009)

Don’t let a faulty module keep you stranded. Order today and restore the performance and reliability of your vehicle with a solution that’s built to last.

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

ENCLAVE

Make

Year

2007

Brand

GM

MPN

13501024

Manufacturer Part Number

GTIN

Does not apply

Scroll to Top