Is Your 2008 Avenger Experiencing Driveability Problems?
If your 2008 Dodge Avenger or 2007-2008 Sebring is suffering from perplexing issues like random stalling, erratic engine behavior, a persistent check engine light, or a complete failure to start, the root cause is often a failing Engine Control Module (ECM). The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it begins to fail, it can create a cascade of problems that are difficult to diagnose and can sideline your vehicle indefinitely.
From the Diagnostic Bay
We recently had a 2008 Dodge Avenger with the 2.7L V6 towed into the shop. The owner was frustrated, explaining that the car would run fine for a few days, then suddenly stall at a stoplight and refuse to restart for an hour. They had already replaced the crankshaft and camshaft sensors, but the problem persisted. After hooking up our diagnostic scanner, we noticed intermittent communication loss with the ECM. A thorough wiring check revealed no faults, pointing directly to an internal failure in the engine computer. Replacing the module with a properly programmed unit resolved all the intermittent stalling and communication issues, getting the customer reliably back on the road.
Common Symptoms of a Failing Engine Computer
- ✔ Persistent Check Engine Light (CEL) with various codes, or no codes at all.
- ✔ Engine misfires, stumbling, or poor acceleration.
- ✔ Drastic decrease in fuel economy for no apparent reason.
- ✔ Harsh or incorrect automatic transmission shifting.
- ✔ Intermittent or complete no-start condition where the engine cranks but won’t fire.
- ✔ Communication errors with diagnostic scan tools.
- ✔ Issues with other electronic systems, as the ECM communicates with multiple modules.
The Direct-Fit Solution for Your 2008 Avenger Engine Computer
Don’t let a faulty module keep you off the road. This replacement 2008 Avenger Engine Computer is the definitive solution to restore your vehicle’s performance and reliability. We remove the biggest obstacle in this repair: the programming. Each unit is professionally programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage before it ships. This means the computer arrives at your door ready for a straightforward, Plug & Play installation. You can bypass the expensive dealership visit, the towing fees, and the complex programming procedures. Simply install the part, and your vehicle’s brain will be fully functional again.
This module is a direct replacement for a wide range of original part numbers, ensuring broad compatibility and a perfect fit for your vehicle. It is built to meet or exceed original equipment specifications for performance and longevity.
Guaranteed Compatibility
This ECM is a direct replacement for the following part numbers, ensuring a perfect match for your vehicle’s system:
05033708AD, 05033708AE, 05033707AJ, 05033708AF, 05094721AA, 05094721AB, 05094721AC, 05094721AE, 05094721AG, 05094721AH, 05094721AI, 05094721AJ, 05094721AK, 05094721AL, 05094721AM, 05094721AN, 05150157AH, 05094721AO, 05094858AA, 05094858AC, 05094858AD, 05094858AE, 05094858AF, 05187343AF, 05150245AC
Fitment Information:
- Dodge Avenger 2008: Electronic Control Module; 2.7L & 3.5L engines
- Chrysler Sebring 2007-2008: Electronic Control Module; 2.7L & 3.5L engines
Ordering this 2008 Avenger Engine Computer is the most efficient and cost-effective way to solve your vehicle’s complex electronic issues. Get your car running right again with a reliable, pre-programmed ECM.
Frequently Asked Questions
Is this engine computer really ‘Plug & Play’?
Yes. We program the module with your vehicle’s VIN and mileage before shipping. This ensures it communicates correctly with your car’s security system and other modules, eliminating the need for any additional programming from a dealer or locksmith. Just install it, and you’re ready to go.
What information do you need from me to program it?
During the checkout process, we will require your vehicle’s 17-digit VIN (Vehicle Identification Number) and the current mileage. This is crucial for a successful programming service. Please double-check this information for accuracy.
Where is the ECM located on a 2008 Dodge Avenger?
On the 2008 Dodge Avenger, the ECM is typically located in the engine bay, mounted to the driver’s side inner fender well or near the firewall. It is a metal box with several large electrical connectors. Always disconnect the battery before attempting to remove or install the module.
Will this fix my specific check engine light codes?
This module will resolve issues and codes that are directly caused by a failing ECM. However, it’s essential to ensure that the codes are not being caused by other faulty components like sensors or wiring. If you have codes for specific sensors, it’s wise to check those parts first. A faulty ECM often causes communication error codes or a cluster of random, unrelated codes.
Do I need any special tools for installation?
Basic hand tools, such as a socket set and screwdrivers, are usually all that’s required to physically replace the module. No special electronic or programming tools are needed since the unit arrives ready for installation.