Restore Your Tahoe’s Performance and Reliability
Is your 2008-2009 Chevrolet Tahoe experiencing frustrating issues like stalling, hesitation, or a complete no-start condition? Before you suspect the in-tank fuel pump, the culprit is often a failed Fuel Pump Control Module (FPCM), also known as a Fuel Pump Driver Module. This critical component regulates the voltage sent to your fuel pump, ensuring optimal fuel pressure under all driving conditions. When it fails, it can leave you stranded. This module is a direct-fit, pre-programmed solution designed to get your truck back on the road without a costly trip to the dealership.
A Technician’s Notebook
I’ve seen hundreds of these GM trucks and SUVs come into the shop with fuel delivery problems. A classic case was a 2008 Silverado that would crank but not start after a heavy rainstorm. The owner had already replaced the fuel pump with no luck. A quick scan showed code U0109 – Lost Communication with FPCM. We hoisted the truck, and sure enough, the original module on the driver-side frame rail was corroded from years of exposure to road salt and water. Installing a new, properly programmed FPCM fixed it instantly. This isn’t an uncommon story; the location of these modules makes them highly susceptible to environmental damage.
Common Signs of a Failing FPCM
- ✔ Engine cranks but will not start.
- ✔ Intermittent stalling, especially while driving.
- ✔ Vehicle hesitation or stumbling during acceleration.
- ✔ Reduced engine power and poor fuel economy.
- ✔ An active Check Engine Light with diagnostic trouble codes (DTCs) such as P069E, P0230, or the common U0109.
This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the guesswork and extra expense out of the repair by pre-programming this module to your vehicle’s specific Vehicle Identification Number (VIN). It arrives flashed with the latest GM software updates, ensuring perfect communication with your vehicle’s computer systems and restoring original performance. This is the most efficient way to fix your 2008-2009 Tahoe Fuel Pump Module issues correctly the first time.
A Straightforward Guide to Installation
- ✔ Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- ✔ Locate the Module: On most GM trucks and SUVs like the Tahoe, the FPCM is mounted to the driver’s side frame rail, often near the spare tire.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors. Be gentle, as the plastic tabs can become brittle. Then, remove the bolts or nuts securing the old module to the frame.
- ✔ Install the New Module: Mount your new, pre-programmed FPCM in the same location. Re-connect the electrical harnesses, ensuring they click securely into place.
- ✔ Final Step: Reconnect the negative battery terminal. The vehicle is now ready to start with no further programming required.
Will This Fit My Vehicle?
This 2008-2009 Tahoe Fuel Pump Module is a direct replacement for part number 13501024 and is also compatible with part numbers 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325. It is guaranteed to fit the following vehicles:
- Acadia: 2009
- Avalanche 1500: 2008-2009
- Canyon / Colorado: 2009
- Enclave: 2009
- Escalade / ESV / EXT: 2008-2009
- Express / Savana 1500 Van: 2008-2009
- Hummer H2: 2008-2009
- Hummer H3: 2009
- Outlook: 2009
- Sierra / Silverado 1500 Pickup: 2007 (New Body Style), 2008-2009
- Sierra Denali: 2008-2009
- Suburban 1500: 2008-2009
- Tahoe: 2008-2009
- Traverse: 2009
- Vue: 2008-2009
- Yukon / Yukon XL 1500: 2008-2009
Frequently Asked Questions
Why do you need my VIN?
Your Vehicle Identification Number (VIN) is required to load the exact, correct GM software for your truck’s specific configuration. This ensures the module works perfectly out of the box, just like a new part from the dealer.
Is any additional programming needed after I install it?
No. This module is a true plug-and-play solution. Because we program it before shipping, you can simply install it and start your vehicle. No dealer visit is necessary.
Where is my VIN located?
You can typically find your 17-digit VIN on the driver’s side of the dashboard (visible through the windshield), on the driver’s side door jamb sticker, or on your vehicle’s registration and insurance documents.
Will this fix a U0109 check engine code?
Yes, in the vast majority of cases. The code U0109 signifies ‘Lost Communication with Fuel Pump Control Module’. If the module has failed, replacing it with this pre-programmed unit is the correct and definitive repair.
How is this different from a part from the auto parts store?
Standard auto parts stores sell blank modules that require expensive, specialized tools to program. Our service includes the programming, saving you the time, cost, and hassle of finding a shop to do it for you.