Restore Your Escalade’s Power and Reliability
Is your Cadillac Escalade EXT experiencing frustrating issues like stalling at intersections, hesitating under acceleration, or refusing to start altogether? These are classic signs of a failing Fuel System Control Module (FSCM). This critical component regulates power to your fuel pump, and when it falters, it can leave you stranded. Get back on the road with confidence with this direct-fit, VIN-programmed 2010-2012 Escalade EXT Fuel System Control Module, designed to restore the precise fuel delivery your engine demands.
Common Symptoms & Your Direct-Fit Solution
A faulty FSCM can trigger a range of performance problems and diagnostic trouble codes (DTCs). If you’re seeing codes like P069E, P0230, or U0109, or experiencing any of the following symptoms, this module is the definitive solution:
- Engine cranks but will not start
- Sudden engine stalling, especially at low speeds or idle
- Noticeable hesitation or stumbling during acceleration
- Reduced engine power and poor performance
- Check Engine Light illumination
Don’t let a faulty module compromise your vehicle’s performance and your peace of mind. This unit is the reliable fix you need to get your truck running like new again.
Features & Benefits
- โ Plug & Play Installation: This module arrives pre-programmed specifically to your vehicle’s VIN. No expensive trips to the dealership for flashing are required.
- โ Latest GM Software: We flash each unit with the most current updates from General Motors, ensuring optimal performance and correcting known factory issues.
- โ Restored Engine Performance: By delivering precise voltage to the fuel pump, this module restores crisp throttle response, smooth idling, and reliable starting.
- โ Guaranteed Compatibility: This module is a direct replacement for part numbers 20791901, 20827745, 20877116, and 20850927, covering a wide range of GM trucks and SUVs.
- โ Peace of Mind: This unit is backed by our one-year replacement warranty.
A Technician’s Insight: Why VIN-Programming is Non-Negotiable
As a seasoned technician, I’ve seen countless vehicle owners buy a blank Fuel System Control Module from a local parts store, only to find their truck still won’t start. These modules are not one-size-fits-all. They require specific software that communicates with your vehicle’s other computers. Without the correct VIN-specific programming, the module is just a paperweight. Our service eliminates this critical failure point, saving you time, money, and the immense frustration of a job that has to be redone. We deliver a part that is truly ready to install right out of the box.
By purchasing this pre-programmed 2010-2012 Escalade EXT Fuel System Control Module, you are choosing the smartest, most efficient path to a reliable repair. We take care of the complex part so you can focus on the straightforward installation.
Frequently Asked Questions
How do I provide my vehicle’s VIN?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your order until we receive this information, as it is essential for programming the module correctly.
Is this part truly plug-and-play?
Yes. Because we program the module to your specific VIN before shipping, it is ready for installation right out of the box. Simply disconnect the old module and connect this new one. No further programming or dealer visits are necessary.
Where is the FSCM located on my 2011 Escalade EXT?
On most GM trucks and SUVs from this era, including the Escalade, the Fuel System Control Module is typically mounted to the driver’s side frame rail, often near the spare tire. It’s a silver box with electrical connectors. Always disconnect the battery before beginning any replacement work.
Will this module fix a P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FSCM. Replacing the module with this pre-programmed unit is the standard and most effective repair for this code.
What other part numbers does this module replace?
This module is a direct replacement for several original GM part numbers, including 20791901, 20827745, 20877116, and 20850927. If your old module has any of these numbers, this part is a guaranteed fit.
Do I need any special tools for installation?
No special tools are required. Basic hand tools, such as a socket set, are all that’s typically needed to access and replace the module on the frame rail. The most important step is ensuring the battery is disconnected before you begin.