2003-2007 Sierra Denali PCM Powertrain Control Module 12589463

Restore Your Truck’s Performance!

Get your GM truck or SUV running smoothly again with this pre-programmed Powertrain Control Module. We flash it to your specific VIN with the latest GM software, ensuring a perfect, plug-and-play fit for your vehicle. Eliminate check engine lights and poor performance. Order today to get back on the road fast!

$134.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-07633-164 Categories: ,
Guaranteed Safe Checkout

Is Your GM Truck Running Rough? The PCM Might Be the Culprit.

If your 2003-2007 Sierra Denali, Silverado, Tahoe, or other compatible GM truck is experiencing perplexing issues like a persistent check engine light, erratic shifting, poor fuel economy, or even a no-start condition, the problem may lie with its electronic brain: the Powertrain Control Module (PCM). As the central command center for your vehicle’s engine and transmission, a failing PCM can disrupt a wide range of critical functions, leading to frustrating and unreliable performance. Don’t let a faulty module keep you off the road. This direct-replacement PCM, part number 12589463, is the reliable solution to restore your vehicle’s peak operation.

Expert Pro Tip
Before replacing your PCM, always perform a thorough check of your vehicle’s battery, terminals, and primary ground connections (engine block to chassis, battery to chassis). A weak battery or a corroded ground can cause voltage drops that mimic the symptoms of a failing PCM, leading to a costly misdiagnosis. A few minutes with a wire brush and a wrench can save you hundreds of dollars.

Common Symptoms of a Failing PCM

A faulty Powertrain Control Module can manifest in various ways. If you’re noticing any of the following signs, it’s a strong indicator that your PCM needs attention:

  • โœ” Persistent Check Engine Light (CEL) with various trouble codes.
  • โœ” Engine stalling, stumbling, or misfiring unexpectedly.
  • โœ” Harsh or erratic automatic transmission shifting.
  • โœ” Noticeable decrease in fuel efficiency.
  • โœ” The engine cranks but refuses to start.
  • โœ” Failure to communicate with diagnostic scan tools.
  • โœ” Unexplained loss of power during acceleration.

Why Choose Our Pre-Programmed 2003-2007 Sierra Denali PCM?

Replacing a PCM isn’t just about swapping hardware. The module must be programmed with the correct software for your vehicle’s specific Vehicle Identification Number (VIN). Our service eliminates the hassle and expense of a dealership visit. When you order from us, you receive a module that is ready for installation. We flash it with the latest GM-certified software updates using your VIN, ensuring perfect compatibility and optimal performance right out of the box. This process corrects factory bugs and improves drivability, fuel economy, and emissions performance based on the newest available calibrations from General Motors.

This module is a direct replacement for multiple service numbers, including 89017750, 12582605, 12589463, 12602802, 89017734, and 28042802, making it a versatile solution for a wide array of GM trucks and SUVs from this era. By providing your VIN at checkout, you guarantee that the 2003-2007 Sierra Denali PCM you receive is tailored specifically for your vehicle’s engine, transmission, and options package.

Installation and Setup

Installation is straightforward for a DIY mechanic or any professional technician. The PCM is typically located in the engine bay on the driver’s side, under or near the battery. After disconnecting the battery, simply unplug the electrical connectors from the old module, unbolt it, and install the new one in its place. Once the new module is connected and the battery is reconnected, you may need to perform a simple security relearn procedure, which can often be done without special tools. In some cases, a Crankshaft Variation Relearn (CASE relearn) may be required with a capable scan tool to clear a P1336 trouble code, ensuring the engine runs its absolute best.

Frequently Asked Questions

Do I need to have this PCM programmed by a dealer?

No. We handle all the programming for you before shipment. Simply provide us with your vehicle’s VIN during or after checkout, and we will flash the module with the latest GM software specific to your truck. It arrives ready to install.

Where is the PCM located on my 2005 Silverado?

On most compatible GM trucks and SUVs from this era, including the Silverado, Sierra, Tahoe, and Yukon, the PCM is located in the engine compartment on the driver’s side, typically mounted to a bracket under the battery tray.

What is a security relearn procedure?

A security relearn, or anti-theft relearn, syncs the new PCM with your vehicle’s existing anti-theft system (Passlock/VATS). It’s a simple procedure that usually involves cycling the ignition key and waiting for a set period. Instructions are readily available online for your specific model.

Is this compatible with my 2004 Hummer H2?

Yes, this PCM is compatible with a wide range of vehicles, including the 2003-2007 Hummer H2, Cadillac Escalade, Chevy Avalanche, Suburban, and many more. Please check the detailed fitment list on this page to confirm compatibility with your exact model and year.

What happens if I don’t provide my VIN?

Programming is essential for the module to function in your vehicle. We cannot ship the part until we have your VIN to ensure it is programmed correctly. After your purchase, we will contact you to obtain this information if it wasn’t provided in the order notes.

MPN

12589463

Year
Conditions & Options

12589463

Genuine OEM

Yes

Condition

Refurbished

PartNumber

590

Model

Sierra Denali

Make

Year

2003 – 2007

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , ,

Interchange part number

Scroll to Top