2010 Tahoe Body Control Module 25934762 Programmed To Your VIN VIN BCM

Restore Your Tahoe’s Electrical System with a Reliable, Programmed BCM

Are you tired of dealing with baffling electrical issues in your 2010 Chevrolet Tahoe? Flickering dashboard lights, power windows with a mind of their own, a security system that won’t cooperate, or even a vehicle that refuses to start can all point to one central culprit: a failing Body Control Module (BCM). As the electronic nerve center for your vehicle’s comfort and convenience features, a faulty BCM can turn your reliable SUV into a source of daily frustration. This is the direct-fit, expertly programmed solution to get your vehicle back to 100% functionality without the excessive cost and scheduling hassles of a dealership visit.

The Smart Solution: A BCM Programmed Specifically for Your Vehicle

Don’t settle for a generic, unprogrammed module that will require expensive specialty tools and software. We take the guesswork and extra cost out of the equation. When you order, simply provide us with your vehicle’s VIN (Vehicle Identification Number). Our technicians will then program this BCM with the latest GM software updates specific to your 2010 Tahoe’s configuration. It arrives at your door ready for installation, making this a straightforward repair for a seasoned DIYer or any professional mechanic.

Is Your BCM Failing? Common Symptoms Include:

• ✔ Erratic or non-functional interior and exterior lights.
• ✔ Power windows, door locks, or mirrors not working correctly.
• ✔ The security system or keyless entry failing to operate.
• ✔ Incorrect readings on the instrument cluster gauges.
• ✔ Communication error codes with other vehicle modules (U-codes).
• ✔ A persistent battery drain when the vehicle is off.

Easy Installation Guide for the 2010 Tahoe BCM

Replacing the BCM in your Tahoe is a manageable job typically located under the driver’s side steering column. While straightforward, following the correct procedure is key.

1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait 10-15 minutes to allow all modules to power down completely.
2. Locate the BCM: On a 2010 Tahoe, the BCM is typically found under the driver’s side of the dashboard, near the steering column. You may need to remove a lower dash panel for access.
3. Disconnect and Remove: Carefully unplug the electrical connectors. They have locking tabs that need to be pressed to be released. Once disconnected, unbolt or unclip the old BCM and remove it.
4. Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
5. Reconnect Battery: Reattach the negative battery terminal.
6. Perform Relearn Procedures: Start the vehicle. You will need to perform the necessary post-installation procedures as outlined below to ensure full functionality.

Important Post-Installation Steps

After installing your new 2010 Tahoe BCM, a few final steps are required to sync the new module with your vehicle’s other systems. This is critical for safety and performance.

• Airbag System (SRS): The ‘Setup SDM Primary Key in BCM’ procedure must be performed with a compatible high-level scan tool. This step is mandatory to clear the airbag warning light and ensure the safety system is operational.
• Brake Pedal Position Sensor: Some vehicles require a recalibration of the brake pedal position sensor. This ensures the brake lights and stability control systems function as intended.
• Theft Deterrent Relearn: You may need to perform a simple key relearn procedure, which typically involves cycling the key in the ignition. Consult your owner’s manual for the specific sequence for your vehicle.

Frequently Asked Questions (FAQ)

Q: Do I need to take my vehicle to the dealer after installation?

A: No! Because we program the BCM to your VIN before shipping, you avoid the need for dealer-specific programming. You or your mechanic will only need to perform the final relearn procedures mentioned above.

Q: How do I provide my VIN?

A: After you complete your purchase, simply send us a message with your 17-digit VIN. We cannot program and ship your part without it.

Q: Is this part compatible with other vehicles?

A: Yes, this BCM is a direct replacement for a wide range of GM vehicles and part numbers. Please check the comprehensive list below to confirm your specific model and original part number.

Q: What happens if I install it without doing the relearn procedures?

A: Your vehicle may run, but you will likely have persistent warning lights (like the airbag light) and certain features may not work. Performing these final steps is essential for a complete and safe repair.

Guaranteed Fitment for a Wide Range of GM Models

This module replaces a long list of original equipment part numbers, including: 10382479, 15093910, 15276271, 15819552, 15872388, 20815898, 22860591, 25892622, 25934762, and many more. It is designed to work with the following vehicles (please verify your specific options):