VIN Programmed 2006-2007 Monte Carlo TCM 24234503

Restore Your Monte Carlo’s Shifting Performance

Experiencing harsh shifts, limp mode, or transmission error codes in your 2006-2007 Monte Carlo? This OEM-quality T42 Transmission Control Module (TCM) is the solution. It arrives pre-programmed to your VIN for a simple, plug-and-play installation, eliminating the need for a dealership visit. Fix your shifting problems for good. Order now!

$79.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-07270-121 Categories: ,
Guaranteed Safe Checkout

Is Your Monte Carlo’s Transmission Acting Up?

If you’re driving a 2006 or 2007 Chevrolet Monte Carlo, you know it for its smooth ride. But when the transmission starts acting erratically, that smooth experience disappears fast. Are you dealing with sudden, harsh gear changes that jolt the car? Is your vehicle stuck in a single gear, often called “limp mode,” making it impossible to drive normally? These are classic signs that the brain of your automatic transmissionโ€”the Transmission Control Module (TCM)โ€”is failing. Don’t let a faulty module sideline your car; the fix is more straightforward than you think.

Common Symptoms of a Failing Monte Carlo TCM

Over my 20+ years in the shop, I’ve seen these T42 modules cause a host of frustrating issues. A failing TCM doesn’t just feel bad; it can lead to poor fuel economy and even damage other transmission components if ignored. Hereโ€™s what to look for:

  • โœ” Unpredictable or harsh shifting between gears.
  • โœ” The vehicle refuses to shift out of 2nd or 3rd gear (Limp Mode).
  • โœ” Check Engine Light or Transmission Warning Light is on.
  • โœ” Diagnostic Trouble Codes (DTCs) like P0700, P0750, or other solenoid-related faults are present.
  • โœ” Delayed engagement when shifting from Park to Drive or Reverse.
  • โœ” A noticeable drop in fuel efficiency.

“A customer’s 2007 Monte Carlo came in last week with these exact symptomsโ€”it was stuck in 3rd gear with a P0700 code. Another shop had told him he needed a new solenoid pack, which is a common misdiagnosis. Before ordering internal parts, we checked the TCM connector for corrosionโ€”it was clean. We knew from experience that the logic board inside these T42 modules can fail, causing false solenoid codes. We installed one of our pre-programmed TCMs, and in 20 minutes, the car was shifting perfectly. It saved the customer hundreds on an unnecessary internal repair.”

The Plug-and-Play Solution: Your Pre-Programmed 2006-2007 Monte Carlo TCM

The biggest headache with replacing electronic modules used to be the mandatory trip to the dealership for programming. We eliminate that step completely. This T42 TCM arrives at your door pre-programmed with the latest GM software, specifically matched to your Monte Carlo’s Vehicle Identification Number (VIN). This means it’s ready for installation right out of the box. It restores the precise communication needed between your engine and transmission for optimal performance and reliability, resolving common electronic faults instantly.

Plug-and-Play Installation: No Dealer Visit Required

For the 2006-2007 Monte Carlo, the TCM is located under the lower air cleaner housing, making it accessible for a DIY repair. You can have your car back to normal in under an hour with basic hand tools.

  1. Safety First: Disconnect the negative terminal from your car’s battery to prevent any electrical shorts.
  2. Access the Module: Locate and remove the air cleaner housing assembly to get a clear view of the TCM.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old TCM. Then, unbolt the module from its mounting bracket and remove it.
  4. Install the New TCM: Mount the new, pre-programmed module in place and securely fasten it. Reconnect the electrical harnesses, making sure they click into place.
  5. Final Steps: Reinstall the air cleaner housing and reconnect the battery terminal. Start the car and take it for a test drive to confirm the shifting issues are resolved. Any stored codes should be cleared.

Key Features & Specifications

  • โœ” VIN-Programmed: Arrives ready to install with no additional programming needed.
  • โœ” Restores Performance: Corrects harsh shifting, limp mode, and false diagnostic codes.
  • โœ” OEM-Quality Build: Engineered to meet or exceed original equipment standards for long-lasting durability.
  • โœ” No Core Charge: Keep your old part. There’s no need to send anything back to us.
  • โœ” One-Year Warranty: We stand behind our parts with a full one-year warranty for your peace of mind.

Confirmed Part Compatibility

This module is a direct replacement for part number 24234503 and is interchangeable with a wide range of other service numbers, including: 24252114, 24230461, 24234274, 24235340, 24235754, 24238856, 24239224, 24239926, 24240400, 24241806, 24243901, 24243921, 24255280, 24256960, 24235732, 24235753, 24240449, and YNXS. Order with confidence and get your Monte Carlo driving like new again.

Genuine OEM

Yes

Brand

GM

MPN

24234503

Condition

Refurbished

Year

2006 – 2007

Model

Monte Carlo

Hardware Type

Interchange part number

Manufacturer Part Number

, , , , , , , , , , , , , , , , , ,

Scroll to Top