Programmed PCM 16263494 | Engine Computer for GM Trucks & Vans | Plug & Drive

Get Your Workhorse Running Right Again

Is a faulty engine computer keeping your truck or van sidelined? Restore its original power and reliability with this VIN-programmed PCM. We handle all the complex programming—you get a simple, plug-and-drive solution that eliminates guesswork and costly dealership visits. Order today and get the job done.

$114.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-05454-91 Categories: ,
Guaranteed Safe Checkout

Is your reliable GM truck or van suddenly running rough, shifting erratically, or refusing to start? A failing Powertrain Control Module (PCM) is often the culprit, leaving you stranded and costing you valuable time. Stop chasing symptoms and get the definitive solution. This module is the brain of your vehicle, and we provide a fully programmed, ready-to-install replacement that restores your vehicle’s performance and gets you back on the road with confidence.

Common Symptoms & Your Solution

If you’re experiencing any of the following, a faulty PCM is the likely cause:

  • Check Engine Light with codes like P0601, P0605, or P0606
  • Rough or inconsistent engine idle
  • Poor fuel economy
  • Harsh or unpredictable transmission shifting
  • Engine stalling or a no-start condition
  • Failure to pass an emissions test

This isn’t just a replacement part; it’s a complete, plug-and-drive fix. We take your vehicle’s VIN and flash this module with the latest, most stable software updates from General Motors. This ensures it communicates perfectly with your engine, transmission, and security system, just like the original. Our Programmed PCM 16263494 is the most reliable and straightforward way to solve these complex electronic issues.

Features & Benefits

  • âś” VIN-Specific Programming: Arrives ready for installation, no need for an expensive trip to the dealership for coding.
  • âś” Updated GM Software: We load the newest factory calibrations to optimize fuel efficiency, emissions, and transmission performance.
  • âś” Plug & Drive Installation: Simply disconnect the battery, swap the modules, and reconnect. It’s designed for a hassle-free installation.
  • âś” Restored Performance: Eliminates rough idle, hesitation, and poor shifting, making your truck or van drive like it should.
  • âś” Cost-Effective Repair: Get a dependable, professionally prepared module for a fraction of the cost of a new dealership part.

From the Technician’s Bench: Why VIN Programming is Non-Negotiable

As a tech with 20+ years of experience, I can’t stress this enough: you can’t just pull a computer from another truck and expect it to work. On these GM vehicles, the PCM is tied directly to the anti-theft system (VATS/Passlock) and has specific fuel and timing maps for your exact engine and transmission combination. A mismatched module will result in a no-start condition, every single time. By providing us your VIN, you’re ensuring the Programmed PCM 16263494 we send you is a perfect electronic match, saving you the headache of a vehicle that’s still dead in the driveway after the repair.

Don’t let a bad computer keep your workhorse out of commission. This module is the correct, reliable fix for a huge range of hardworking GM trucks, vans, and SUVs from the late 90s and early 2000s. After you complete your purchase, simply send us your vehicle’s VIN, and we’ll handle the rest. Your Programmed PCM 16263494 will ship out ready to restore the heart of your vehicle.

Frequently Asked Questions

Do I need to do any programming myself?

No. This module comes fully programmed to the VIN you provide. The only procedure you may need to perform after installation is a security relearn, which is a simple process that takes about 30 minutes and does not require any special tools. We include instructions for this.

How do I provide my VIN?

After you place your order, you can send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information.

Is this the same as an ECM or an ECU?

Yes. The terms Powertrain Control Module (PCM), Engine Control Module (ECM), and Engine Control Unit (ECU) are often used interchangeably for this part. It is the main computer that controls your vehicle’s engine and often the transmission as well.

What is the most important step during installation?

Always disconnect the vehicle’s battery before removing the old module and installing the new one. This prevents any risk of electrical shorts that could damage the new computer or other vehicle components.

How can I be sure this fits my vehicle?

Please check the extensive fitment list provided on this page. This module replaces several part numbers, including 16263494 and 16265035. As long as your vehicle is on the list and requires one of these part numbers, this module is the correct fit.

Condition

Refurbished

Year
Genuine OEM

Yes

MPN

21811787

Interchange part number

Model

GMC 3500

Year

1999

Brand

GM

Manufacturer Part Number

, , , ,

Scroll to Top