2006 – 2011 – Body Control Module 15880684 Programmed To Your VIN VIN BCM

Restore Your Vehicle’s Electronics!

End the frustration of flickering lights, faulty locks, and security system errors. This Body Control Module comes fully programmed to your vehicle’s VIN for a true plug-and-play solution. Fix your vehicle’s electrical issues for good. Order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-305 Categories: ,
Guaranteed Safe Checkout

Tired of Electrical Gremlins? Restore Your Vehicle’s Functionality!

As a technician with over two decades of experience, I’ve seen it all when it comes to vehicle electronics. Strange issues like power windows with a mind of their own, flickering dashboard lights, or a security system that randomly prevents your car from starting can be incredibly frustrating. More often than not, the culprit is a failing Body Control Module (BCM). This isn’t just an inconvenience; it’s the central command for your vehicle’s comfort and security features. This GM Body Control Module is the definitive solution to get your car, truck, or van operating reliably again.

The biggest headache with BCM replacement has always been the mandatory, and often expensive, trip to the dealership for programming. We eliminate that step entirely. When you purchase from us, you provide your vehicle’s VIN, and we flash the module with the latest GM software specifically for your vehicle. It arrives at your door ready for installation, saving you time, money, and the hassle of scheduling a dealer appointment.

Case Study: A Tricky Diagnosis

A customer brought in their 2008 Chevy Impala with a laundry list of bizarre symptoms: the radio would turn on and off, the driver’s side power lock was inoperative, and the anti-theft light was on, causing an intermittent no-start condition. They had already replaced the battery and checked fuses with no luck. After connecting my scan tool, I saw multiple communication loss codes with various modules. This pointed directly to the BCM. Instead of a complex wiring repair, the fix was a new GM Body Control Module. Once we installed this pre-programmed unit, all the electrical gremlins vanished. The customer was back on the road the same day, avoiding a costly dealer visit.

Is Your GM Vehicle Showing These BCM Failure Signs?

  • ✔ Erratic or non-functional power windows, door locks, or interior/exterior lights.
  • ✔ The security or anti-theft light is illuminated on the dash, possibly causing a no-start condition.
  • ✔ Dashboard warning lights (like the airbag light) stay on for no apparent reason.
  • ✔ Horn, wipers, or radio function intermittently or not at all.
  • ✔ Key fobs stop working, even after replacing the battery.
  • ✔ Communication errors with other vehicle modules when checked with a scan tool.

Your Straightforward BCM Installation Guide

Replacing the BCM is a manageable task for a confident DIYer. While the exact location varies by model (check the fitment list below), the process is generally similar.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
  2. Locate the BCM: Depending on your vehicle, it’s typically found under the driver’s side dash, behind the glove box, or in the center console area.
  3. Disconnect and Remove: Carefully unplug the wiring harness connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old module and remove it.
  4. Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all wiring harnesses. Ensure they click into place.
  5. Reconnect Battery: Reattach the negative battery terminal.
  6. CRITICAL – Post-Installation Steps: After installation, you MUST perform a ‘Setup SDM Primary Key in BCM’ procedure with a compatible high-end scan tool to ensure the airbag system communicates correctly and extinguish the warning light. Some vehicles may also require a Brake Pedal Position Sensor recalibration. Failure to perform these steps can leave safety systems inoperative. If you are unsure, consult a professional technician.

Verified Fitment for Your GM Vehicle

This module is a direct replacement for a wide range of GM vehicles and supersedes multiple part numbers, ensuring broad compatibility. Please verify your model and year from the list below. This part is a confirmed fit for part numbers including: 10382479, 15299986, 15880684, 20815898, 22860591, 25892622, and many more.

ACADIA 07-12 (LH dash) | AVALANCHE 1500 10 (under steering column) | CAPRICE 11-13 | CAPTIVA SPORT 12 (center dash) | CTS 08-13 (LH/RH dash) | DTS 06-11 (RH center dash) | ENCLAVE 08-12 (LH dash) | EQUINOX 07-09 (center dash) | ESCALADE / ESV / EXT 10 (under steering column) | EXPRESS & SAVANA VANS 08-12 (center dash) | G8 08-09 (center dash) | HUMMER H2 08-09 (LH firewall) | IMPALA 06-13 (LH dash) | LUCERNE 06-11 (right side dash) | MONTE CARLO 06-07 (LH steering column) | OUTLOOK 07-10 (center dash) | SRX 07-09 (LH dash) | STS 10 (center dash) | SUBURBAN 1500 10 (under steering column) | TAHOE 10 (under steering column) | TORRENT 07-09 (center dash) | TRAVERSE 09-12 (LH dash) | VUE 08-10 (center dash) | YUKON / YUKON XL 1500 10 (under steering column)

Frequently Asked Questions

What exactly does a Body Control Module do?

The BCM is a computer that acts as the central hub for your vehicle’s body electronics. It controls non-engine related functions like power windows, locks, interior and exterior lighting, security systems, wipers, and more. When it fails, you get unpredictable electronic behavior.

Why do you need my VIN to program the BCM?

Your Vehicle Identification Number (VIN) allows us to flash the BCM with the precise software and calibrations for your vehicle’s specific options and features. This ensures all functions work correctly right out of the box, making the installation process as simple as possible.

Is this a difficult part for a DIYer to replace?

For most models, the physical replacement is straightforward, requiring basic hand tools. The most critical part is performing the post-installation procedures like the airbag system key setup. If you don’t have access to a high-level diagnostic tool, we recommend having a professional technician complete the final steps.

What happens if I don’t perform the post-installation procedures?

Skipping the ‘Setup SDM Primary Key’ procedure will result in the airbag warning light staying on, and more importantly, the supplemental restraint system (airbags) may not function correctly in an accident. The brake pedal recalibration ensures proper brake light operation and stability control function. These steps are essential for safety.

Will this fix my ‘Service Theft System’ message?

In many cases, yes. The BCM is a core component of the Pass-Key and Pass-Lock anti-theft systems on GM vehicles. A failing BCM is a very common cause of security system warnings and no-start problems. This pre-programmed module is designed to resolve those communication issues.

Is this a brand new part?

This is a high-quality, inspected, and tested used OEM component. We ensure it meets or exceeds factory specifications and then program it with the latest GM software for your vehicle, offering a reliable and cost-effective solution.

Genuine OEM

Yes

Condition

Refurbished

MPN

15880684

Interchange part number

PartNumber

591

Model

BRAVADA

Year

2013

Brand

GM

Manufacturer Part Number

Scroll to Top