Restore Full Electronic Functionality to Your GM Vehicle
Is your Chevrolet, GMC, or Cadillac plagued by strange and frustrating electrical problems? Flickering lights, malfunctioning power windows, a faulty security system, or a dashboard that has a mind of its own are all classic signs of a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it malfunctions, it can make your car or truck nearly impossible to live with. This listing is for a professionally programmed GM BCM 13594692, offering a simple, plug-and-play solution to these complex issues.
Simply replacing a BCM isn’t enough. A new or used module from another vehicle must be programmed with your specific Vehicle Identification Number (VIN) and factory options. Without this critical step, the module won’t communicate with other computers in your vehicle, leading to even more problems. Our unique cloning service eliminates the need for expensive dealership visits and complex diagnostic tools. We transfer the essential data from your original BCM directly onto a replacement unit, ensuring a seamless, error-free installation.
From the Diagnostic Bay
We recently worked with a customer who owned a 2015 Sierra 1500. He was dealing with a classic case of BCM failure: his interior lights would stay on, the radio would randomly shut off, and his key fob stopped working. A dealership quoted him over $1100 for a new BCM, programming, and labor. He was hesitant to spend that much on an older truck. He found our service, mailed in his original BCM, and within a few days, we shipped him a fully programmed replacement. He installed it himself in under an hour and all the bizarre electrical gremlins were gone. It’s a perfect example of how a targeted repair can save hundreds of dollars and significant hassle.
Is Your Vehicle Showing Signs of BCM Failure?
A faulty BCM can manifest in numerous ways, often seeming unrelated at first. If you’re experiencing several of the following symptoms, your BCM is the likely culprit:
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights that flicker, stay on, or don’t work at all.
- ✔ The security system or alarm randomly activating or failing to arm.
- ✔ Key fob not responding or working inconsistently.
- ✔ Dashboard warning lights (like ABS or Airbag) illuminating without a clear cause.
- ✔ Wipers or horn activating on their own.
- ✔ A no-start condition where the engine cranks but won’t fire due to security system issues.
Our Simple, Hassle-Free Cloning Process
Getting your vehicle back to normal is a straightforward process. We’ve designed our service to be as easy as possible for you:
- Place Your Order: Complete your purchase through our secure checkout.
- We Contact You: We will reach out with clear, step-by-step instructions on how to remove and ship your original BCM to our facility.
- The Magic Happens: Once we receive your module, our technicians will perform a full data transfer, cloning all VIN-specific information, key data, and option configurations to the replacement GM BCM 13594692.
- Plug & Play: We ship your original module and the ready-to-install replacement back to you. No further programming is required. Just install the module, and you’re ready to go.
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, certain vehicle systems may require a simple relearn procedure after the BCM is reconnected. These are not programming steps but rather synchronization procedures that can often be done with a high-quality diagnostic scan tool.
- Airbag System Sync: In some cases, the airbag warning light may illuminate after installation. This typically requires a ‘Setup SDM Primary Key in BCM’ procedure to sync the airbag module with the new BCM. This is only necessary if the light appears.
- Brake Pedal Position Relearn: To ensure proper brake light and traction control function, a brake pedal position sensor recalibration might be needed.
Please note: Specific procedures can vary by vehicle. We always recommend consulting a factory service manual or a qualified technician if you are unsure.
Frequently Asked Questions
What exactly is a BCM cloning service?
BCM cloning is the process of reading the unique, vehicle-specific software and security data from your original Body Control Module and writing it onto a replacement module. This makes the replacement an exact digital copy, allowing it to work in your vehicle without any additional programming.
Why can’t I just install a used BCM from a junkyard?
A used BCM is programmed to the VIN and options of the vehicle it came from. Installing it in your car will create a mismatch, causing features not to work and potentially immobilizing your vehicle due to security conflicts. It must be programmed to your specific vehicle, which our service accomplishes.
How long does this entire process take?
Our in-house processing time is typically 1-2 business days after we receive your original module. The total time will depend on the shipping speed you choose to send your module to us and for us to return it to you.
What if my original BCM is completely dead or damaged?
In many cases, even if the BCM is failing, the core data on the memory chip is still readable. If your module has severe water or fire damage, please contact us before ordering so we can discuss potential options.
Is this a guaranteed fix for my vehicle’s problems?
This service is a guaranteed solution for a faulty BCM. It is crucial to properly diagnose the BCM as the source of your issues. If your problems are caused by other components, such as faulty wiring or sensors, replacing the BCM will not resolve them.