Programmed Body Control Module BCM for 2010 Escalade ESV 15837419

End Your Escalade’s Electrical Nightmares

Stop chasing electrical gremlins. This Body Control Module for your 2010 Escalade ESV arrives fully programmed to your vehicle’s VIN. It’s the definitive fix for faulty windows, flickering lights, and security system issues. No dealership visit required and no core charge. Get your luxury SUV back to perfect working order—order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-495 Categories: ,
Guaranteed Safe Checkout

Restore Full Functionality to Your GM Vehicle

If you’re dealing with bizarre and frustrating electrical issues in your 2010 Cadillac Escalade ESV—like power windows with a mind of their own, flickering dash lights, or a security system that won’t cooperate—the Body Control Module (BCM) is the likely culprit. As a technician with over two decades of diagnostic experience, I’ve seen firsthand how a failing BCM can wreak havoc. It’s the central hub for your vehicle’s body electronics, and when it fails, it feels like the car has developed a ghost.

This isn’t just another part. This is a complete, ready-to-install solution. We take the hassle and high cost of dealership programming out of the equation. Simply provide your vehicle’s VIN at checkout, and we will flash this module with the latest, most stable software directly from GM. This ensures that when you receive your 2010 Escalade ESV BCM, it’s prepared to integrate seamlessly with your vehicle’s specific options and systems.

Case Study: A Tricky Diagnosis

A customer brought in a 2010 Escalade ESV with a laundry list of complaints: the radio would randomly shut off, the driver’s side power seat was inoperative, and the “Service Airbag” light was on. Initial scans showed a dozen communication codes (U-codes), pointing to a network problem. Instead of chasing each component, my experience pointed to the central hub: the BCM. A faulty BCM can disrupt the entire data bus, creating phantom issues across multiple systems. We replaced it with a VIN-programmed unit like this one, and every single issue was resolved in one go. It saved the customer hundreds in diagnostic time and unnecessary parts.

Is Your Vehicle Showing These Symptoms?

A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, this module is the likely solution:

  • ✔ Erratic or non-functional power windows, door locks, or mirrors.
  • ✔ Interior or exterior lights that flicker, stay on, or don’t work at all.
  • ✔ The security system or keyless entry acting up or failing completely.
  • ✔ False warnings on the instrument cluster (e.g., Door Ajar, Service Theft System).
  • ✔ Communication error codes, particularly U0140 (Lost Communication With Body Control Module).
  • ✔ Intermittent no-start conditions where the engine cranks but won’t fire up.

A Straightforward Guide to BCM Installation

For the confident DIYer or professional mechanic, replacing the BCM is a manageable job. On the 2010 Escalade ESV, the BCM is typically located under the steering column, accessible from the driver’s side footwell.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes for the system to fully discharge.
  2. Locate the Module: Remove the lower dash panel beneath the steering wheel to gain access to the BCM. It will have several large electrical connectors attached.
  3. Disconnect and Remove: Carefully unplug all electrical connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old BCM from its mounting bracket.
  4. Install the New Module: Mount your new, pre-programmed BCM in the exact same position. Reconnect all electrical connectors firmly until they click into place.
  5. Post-Installation Steps: Reconnect the battery terminal. Start the vehicle and check for proper function of all body electronics. In some cases, additional relearn procedures may be needed. For instance, if the airbag light is on, a professional scan tool is required for the ‘Setup SDM Primary Key in BCM’ procedure. A ‘Brake Pedal Position Relearn’ may also be necessary for proper brake light and stability control function.

Verified Vehicle Compatibility

This BCM is a direct replacement for a wide range of GM vehicles and part numbers, ensuring a perfect fit. It is compatible with part number 15837419 and many others. Please verify your vehicle is on this list. Note that some models have specific ID requirements.

ACADIA 07-12
AVALANCHE 1500 10 (ID 25892622)
CAPRICE 11-13
CAPTIVA SPORT 12
CTS 08-13
DTS 06-11
ENCLAVE 08-12
EQUINOX 07-09
ESCALADE 10 (ID 25892622 or 20815898)
ESCALADE ESV 10 (ID 25892622 or 20815898)
ESCALADE EXT 10 (ID 25892622)
EXPRESS VANS 08-12
G8 08-09
HUMMER H2 08-09
IMPALA 06-13
LUCERNE 06-11
MONTE CARLO 06-07
OUTLOOK 07-10
SAVANA VANS 08-12
SRX 07-09
STS 10
SUBURBAN 1500 10 (ID 25892622 or 20815898)
TAHOE 10 (ID 25892622 or 20815898)
TORRENT 07-09
TRAVERSE 09-12
VUE 08-10
YUKON 10 (ID 25892622 or 20815898)
YUKON XL 1500 10 (ID 25892622 or 20815898)

Do I need to do any programming myself?

Do I need to do any programming myself?

No. The main benefit of our service is that this 2010 Escalade ESV BCM arrives at your door fully programmed to your vehicle’s VIN. It’s ready for installation right out of the box, saving you a costly trip to the dealership.

What is a core charge? Do I need to send my old part back?

There is absolutely no core charge for this module. You can keep your old BCM, which is convenient if you ever need to reference it or want to attempt a repair on it later.

Will this fix my ‘Service Airbag System’ light?

If the BCM is the root cause of the light, yes. However, after installation, the airbag system may need to be re-synced with the new BCM. This is a security procedure called ‘Setup SDM Primary Key in BCM’ and requires a professional-grade scan tool to complete.

How do I provide my VIN?

After you complete your purchase, you will need to send us your 17-digit Vehicle Identification Number (VIN). We cannot program and ship your module without it. Please double-check it for accuracy to ensure perfect compatibility.

Genuine OEM

Yes

Condition

Refurbished

MPN

15837419

Interchange part number

PartNumber

591

Model

Escalade Esv

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top