Restore Your Vehicle’s Electrical System with a Plug-and-Play Solution
Are you battling frustrating and unpredictable electrical problems in your GMC Yukon, Sierra, or other compatible GM vehicle? Issues like flickering lights, malfunctioning power windows and locks, a faulty security system, or random warning messages on your dash are often symptoms of a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it fails, it can create a cascade of confusing problems. This listing offers a reliable and straightforward solution: a replacement BCM, part number 13594692, that is professionally programmed with your vehicle’s original data.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-working interior and exterior lights.
- ✔ Power windows, door locks, or mirrors behaving erratically.
- ✔ The security system engaging randomly or preventing the car from starting.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Wipers activating on their own or not responding to controls.
- ✔ False warning lights appearing on the instrument cluster (e.g., ABS, Airbag, Check Engine).
- ✔ Complete no-start condition where the vehicle has power but won’t crank.
Why Our Programming Service is the Smart Choice for Your 2015 Yukon BCM
Replacing a BCM isn’t as simple as swapping the part. A new module from the dealership requires expensive and time-consuming programming to sync it with your vehicle’s unique Vehicle Identification Number (VIN) and specific options. Our professional cloning service eliminates this hassle entirely. We transfer the critical data from your original, failing BCM directly onto this replacement unit. The result is a true plug-and-play module that is ready for installation the moment you receive it, saving you hundreds of dollars in dealership fees and programming costs.
From the Diagnostic Bay
We had a 2015 Sierra 1500 come into the shop with a laundry list of bizarre electrical issues. The radio would shut off, the dome lights would flicker while driving, and the power locks would cycle on their own. The owner was convinced his truck was haunted. After ruling out battery and ground issues, our diagnostics pointed to an internal failure in the BCM. Instead of a costly new module and a trip to the dealer for programming, we used our cloning service. We transferred the data from his old module to a replacement unit. The customer installed it himself in about 45 minutes, and every single electrical gremlin was gone. It’s a common fix for these vehicles that saves time, money, and a lot of headaches.
The Simple Mail-In Process
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We Contact You: We will reach out with clear instructions for shipping your original BCM to our facility.
- ✔ Ship Your Module: Carefully remove and send us your original BCM.
Important Post-Installation Information
While our goal is a seamless installation, some GM vehicles may require minor electronic handshakes after the new BCM is installed. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This requires a professional-grade scan tool to sync the airbag system with the new BCM and clear the light.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure correct brake light operation and traction control functionality.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment
This BCM is a direct replacement for part numbers 13594692, 13594768, 13593214, 13580690, 13591519, and 13594769. It is compatible with a wide range of GM vehicles, including but not limited to:
- 2015 GMC Yukon & Yukon XL 1500
- 2014-2015 GMC Sierra & Chevrolet Silverado (1500, 2500, 3500)
- 2015 Chevrolet Tahoe & Suburban 1500
- 2015 Cadillac Escalade & Escalade ESV
- 2014-2017 Chevrolet SS & Caprice
- 2014-2019 Chevrolet Impala
- 2014 Cadillac CTS, ATS, XTS
- 2014 Chevrolet Corvette
Please verify your part number or contact us with your VIN to ensure compatibility before ordering your replacement 2015 Yukon BCM.
Frequently Asked Questions
What exactly is a BCM cloning service?
We extract the essential vehicle-specific data—like the VIN, mileage, and security information—from your original BCM and write it onto the replacement module. This makes the new module an exact electronic copy of the old one, allowing it to work in your vehicle without any additional programming.
Is this better than buying a new BCM from a dealer?
For most owners, yes. Our service provides a plug-and-play part that saves you a trip to the dealership and avoids their expensive programming fees, which can often cost several hundred dollars on top of the price of the part itself.
How long does the programming process take?
Once we receive your original BCM, we typically complete the cloning service and ship your pre-programmed replacement module back out within 24-48 business hours.
Will my vehicle’s mileage and VIN be correct after installation?
Yes. Because we are performing a direct data transfer, the replacement BCM will retain your vehicle’s original VIN and correct mileage information.
What if my original BCM is completely dead or water damaged?
In cases where the original module cannot be read due to severe damage, we may not be able to perform the cloning service. Please contact us before purchasing if your module has significant physical or water damage.
Do I need any special tools to install the BCM?
The physical installation typically only requires basic hand tools like a socket set and screwdrivers. However, as noted, some vehicles may require a professional scan tool for post-installation procedures like an airbag sync or brake pedal position relearn.