Restore Your Vehicle’s Electrical System with a Hassle-Free Solution
Are you dealing with baffling electrical issues in your 2015 GMC Yukon or another compatible GM vehicle? Flickering lights, malfunctioning power windows, a security system that acts on its own, or even a no-start condition can often be traced back to a single, critical component: the Body Control Module (BCM). As the central command center for your vehicle’s body electronics, a failing BCM can turn your reliable truck into a source of daily frustration. Dealerships often charge a small fortune for a new module plus the mandatory programming fees. We offer a smarter, more affordable path forward.
This is a direct-replacement BCM, compatible with part number 13580690 and others, that comes ready for installation through our professional cloning service. You simply send us your original BCM, and we transfer all of its vital programming—including key data and vehicle-specific options—to this replacement unit. We then ship it back to you, ready to be installed. This process bypasses the need for expensive scan tools or a trip to the dealership, making it the perfect solution for both seasoned mechanics and DIY enthusiasts.
Case Study: A Tricky Diagnosis
A customer brought in a 2015 Sierra 1500 with a list of symptoms that seemed unrelated. The radio would randomly shut off, the driver-side window worked intermittently, and the horn would blare when locking the doors with the fob. They had already replaced the battery and checked all the fuses. After connecting my diagnostic tool, I saw a dozen communication error codes (U-codes) all pointing to a network disruption. In my 20+ years of experience, this kind of widespread electrical chaos almost always points to the BCM. Instead of a new, unprogrammed unit, we used this cloning service. Once the programmed module was installed, every single issue was resolved instantly. It saved the customer over $600 compared to the dealer quote.
Is Your Vehicle Showing These Symptoms?
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, locks, or mirrors that don’t work correctly.
- ✔ The security system or keyless entry is malfunctioning.
- ✔ The vehicle won’t start, but the battery and starter are good.
- ✔ Multiple warning lights on the dashboard with no clear cause.
- ✔ Common Diagnostic Trouble Codes (DTCs) like U0140, U0155, or other B-series codes related to body components.
Your Simple Path to a Reliable Repair
- ✔ Step 1: Place your order for this BCM programming service.
- ✔ Step 2: We will contact you with clear, step-by-step instructions for removing your original BCM and shipping it to our facility.
- ✔ Step 3: Once we receive your module, our technicians will expertly transfer all programming to the replacement unit, typically within 24-48 hours.
- ✔ Step 4: We ship your newly programmed BCM back to you with tracking information. Installation is as simple as plugging it in.
Important Post-Installation Information
While our cloning service makes this a near plug-and-play repair, some vehicle systems may require a quick sync-up after installation. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional-grade scan tool. This is only necessary if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure flawless operation of the brake lights and traction control system.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any procedure.
Guaranteed Fitment for Your GM Vehicle
This BCM service is compatible with a wide range of GM cars, trucks, and SUVs. Please verify your part number is listed below (13594692, 13594768, 13593214, 13580690, 13591519, 13594769) and check the compatibility list:
- ATS (2014)
- Caprice / SS Caprice (2014-2017)
- Corvette (2014)
- CTS (2014)
- Escalade / Escalade ESV (2015)
- Impala (2015-2019)
- Sierra / Silverado 1500 (2014)
- Sierra / Silverado 2500 & 3500 (2015)
- Suburban 1500 (2015)
- Tahoe (2015)
- XTS (2014)
- Yukon / Yukon XL 1500 (2015)
Frequently Asked Questions
How does the cloning service work?
After you purchase, we provide instructions to mail your original BCM to us. We extract the unique data from your module and flash it onto the replacement unit. This ensures it works perfectly with your vehicle’s existing keys, mileage, and options without any extra programming.
Is this a plug-and-play solution?
Yes, for over 99% of installations. Because we clone your original data, the vehicle recognizes the new module as its own. In rare cases, a simple relearn procedure like for the airbag or brake pedal sensor may be needed, which can be done with a standard pro-level scan tool.
How long does the process take?
Once we receive your original BCM, our programming service is typically completed within 24-48 business hours. We then ship the replacement module back to you promptly.
What part number should I check?
Check the sticker on your original BCM. This service is compatible if your part number is 13594692, 13594768, 13593214, 13580690, 13591519, or 13594769.
Do I need to send my keys?
No. Since we are cloning the data directly from your module, all your existing keys will work seamlessly with the replacement BCM.
Is there a core charge?
No, there is no core charge. You can keep your original module after you send it to us for the data transfer.