Restore Your Vehicle’s Electrical System with a Hassle-Free Solution
Are you dealing with baffling electrical issues in your 2015 Chevrolet Tahoe? Flickering lights, unresponsive power windows, or random warning messages on the dash are classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it malfunctions, it can cause a cascade of frustrating and unpredictable problems. Instead of facing a costly trip to the dealership and lengthy programming procedures, our professional cloning service offers a direct, reliable, and affordable fix.
This service is designed to get you back on the road with minimal downtime. We provide a fully compatible replacement BCM (interchangeable with part numbers like 13594692, 13580690, and more) that is precisely programmed with your vehicle’s original data. The process is simple: you purchase this service, ship your original BCM to our facility, and we handle the rest. Our technicians will expertly extract the unique software, key data, and vehicle-specific settings from your module and transfer it to the replacement unit. We then ship the ready-to-install BCM back to you, often eliminating the need for any additional on-vehicle programming.
Case Study: A Tricky Diagnosis
I remember a 2015 Sierra that came into the bay with a laundry list of complaints from the owner. The radio would turn on and off by itself, the driver’s side window wouldn’t work, and the security light was always on. The owner had already replaced the battery and checked all the fuses. A scan showed a dozen communication codes (U-codes) pointing to a network failure. After isolating the circuits, all signs pointed to an internal BCM failure. Instead of a new, unprogrammed module from the dealer which would have required hours of setup, we used our cloning service. We had the customer’s original BCM overnighted, cloned it the next morning, and shipped the replacement back. The customer installed it himself in under 30 minutes, and every single issue was resolved. It’s a perfect example of how this service saves both time and money.
Is Your Vehicle Showing These Symptoms?
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors working intermittently or not at all.
- ✔ The anti-theft or security system light staying illuminated, potentially causing a no-start condition.
- ✔ Inaccurate gauge readings or warning lights on the instrument cluster.
- ✔ A flurry of communication error codes, such as U0100, U0140, or other U-series DTCs.
- ✔ Remote keyless entry (key fob) not working correctly.
Your Straightforward BCM Swap Guide
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- ✔ Locate and Remove: On most compatible trucks and SUVs like the Tahoe, the BCM is located under the steering column, behind the lower dash panel. Carefully disconnect the electrical connectors and unbolt the module.
- ✔ Ship Your Module: After your purchase, we will contact you with detailed instructions for securely packaging and shipping your original BCM to our programming center.
- ✔ We Handle the Tech: Once we receive your module, our experts will perform the data cloning service onto the replacement BCM, typically within one business day.
- ✔ Install the Replacement: When you receive the programmed module from us, simply install it in the reverse order of removal. Ensure all connectors are securely fastened.
- ✔ Power Up: Reconnect the negative battery terminal.
- ✔ Final Checks: Start the vehicle and test all body functions (lights, windows, locks, etc.). Note the post-installation procedures below, as some models may require an additional step.
Important Post-Installation Information
While our cloning process makes this a near plug-and-play repair for your 2015 Tahoe Body Control Module, some vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the BCM and is only required if the light is on.
- Brake Pedal Position Relearn: On certain models, a brake pedal position sensor relearn may be necessary to ensure correct brake light operation and traction control functionality.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step.
Verified Compatibility for a Wide Range of GM Vehicles
This BCM cloning service is compatible with a variety of GM cars, trucks, and SUVs. Please verify your part number (this module replaces 13594692, 13594768, 13593214, 13580690, 13591519, 13594769) and check the list below. This is not a complete list, so matching the part number is the most accurate way to ensure compatibility.
- ATS (2014)
- CAPRICE / SS CAPRICE (2014-2017)
- CORVETTE (2014)
- CTS (2014)
- ESCALADE / ESCALADE ESV (2015)
- IMPALA (2015-2019)
- SIERRA 1500 / DENALI 1500 (2014)
- SIERRA 2500 / 3500 / DENALI (2015)
- SILVERADO 1500 (2014)
- SILVERADO 2500 / 3500 (2015)
- SUBURBAN 1500 (2015)
- TAHOE (2015)
- XTS (2014)
- YUKON / YUKON XL 1500 (2015)
With our service, there is no core charge. You can keep your original, non-working module. Order today and let us provide the reliable, pre-programmed 2015 Tahoe Body Control Module you need to get your vehicle operating perfectly again.
Frequently Asked Questions
Frequently Asked Questions
How exactly does the BCM cloning service work?
You send us your vehicle’s original BCM. We use specialized equipment to read the essential data—like VIN, mileage, key fob programming, and specific options—and write it directly onto a fully tested replacement BCM. This makes the new module a perfect electronic match for your vehicle.
Is this guaranteed to fix my vehicle’s problems?
This service resolves all issues directly caused by a faulty BCM. However, it’s crucial to ensure the BCM is the true source of the problem. We recommend a proper diagnosis by a qualified technician to rule out other potential causes like wiring or sensor faults before ordering.
Do I need a scan tool or a trip to the dealer after installation?
In over 95% of cases, no further programming is needed. Our cloning service handles it all. The only exceptions are rare instances where a specific relearn procedure, like for the airbag or brake pedal sensor, is required post-installation, which would need a capable scan tool.
What if my original BCM is completely dead or unreadable?
In cases where the original module has severe internal damage preventing data recovery, we will contact you to discuss alternative options. However, we can successfully clone the vast majority of modules, even those that appear completely non-functional in the vehicle.
How long does the entire process take?
Once we receive your original BCM, our in-house programming and testing process typically takes just 1-2 business days. We then ship the replacement module back to you. Total turnaround time will depend on shipping speeds to and from our facility.