Restore Full Electronic Functionality to Your GM Vehicle
Are you battling bizarre electrical issues in your 2015 Chevrolet Suburban or another compatible GM vehicle? Problems like flickering lights, malfunctioning power windows and locks, a faulty security system, or even a no-start condition often point to a single culprit: a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it fails, it can create a cascade of frustrating and unpredictable problems. This listing offers a reliable, straightforward solution: a replacement BCM, part number 13592137, that is professionally programmed using the data from your original unit.
We recently had a 2015 Yukon XL in the shop with a laundry list of complaints. The dome lights would stay on, the driver’s side window wouldn’t go down, and the radio would randomly shut off. The owner had already replaced the battery and checked all the fuses. After connecting our diagnostic scanner, we saw multiple communication loss codes with various modules. The common link was the BCM. Upon removal, we found faint traces of water intrusion along the main connector from a leaky windshield seal. A failing BCM can mimic dozens of other problems, which is why a proper diagnosis is key. Our cloning service allowed us to get the customer back on the road with a perfectly functioning vehicle without the time and expense of a dealership visit.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional interior and exterior lights (headlights, taillights, dome lights).
- ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
- ✔ The security system engaging randomly, causing the alarm to sound or preventing the engine from starting.
- ✔ Dashboard warning lights illuminating without a clear cause (e.g., airbag, ABS).
- ✔ Key fobs that stop working or have a significantly reduced range.
- ✔ Complete loss of power to various accessories like the radio or climate control.
- ✔ A vehicle that won’t start, even with a good battery and starter.
Why Our 2015 Suburban BCM Service is the Best Solution
Replacing a modern BCM isn’t as simple as swapping parts. Each module is coded specifically to your vehicle’s VIN and its unique set of options. A new BCM from the dealership requires expensive and complex programming with specialized tools. Our professional cloning service bypasses this entire process. We transfer the critical data from your original BCM directly onto the replacement unit. This makes the replacement module a perfect digital twin of your original, ensuring a true plug-and-play installation. You get to avoid towing your vehicle to a dealer, paying for multiple hours of labor, and waiting for parts. It’s the most efficient and cost-effective way to solve your BCM-related electrical problems.
How The Programming Service Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We’ll Contact You: We will reach out to you using the contact information on your order to provide shipping instructions for your original BCM.
- ✔ Ship Your Original Module: Carefully package and ship your original BCM to our facility.
- ✔ Cloning Process: Once we receive your module, our technicians will extract the necessary data and program the replacement unit. This typically takes 1-2 business days.
- ✔ Receive Your Ready-to-Install BCM: We ship your newly programmed BCM back to you. Once it arrives, simply install it, and you’re ready to go.
Important Post-Installation Information
While our goal is a seamless plug-and-play experience, certain vehicle systems may require a recalibration or sync procedure after the BCM is installed. Please be aware of the following potential requirements:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This is only necessary if the light is on.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure correct brake light operation and traction control functionality.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Compatible Part Numbers & Fitment
This module is a direct replacement for the following part numbers: 13592137, 13506935, 13506936, 13587704, 13594764. It is confirmed to fit a wide range of 2015 and newer GM vehicles. Please verify your part number and check the fitment list below to ensure compatibility.
Frequently Asked Questions
What exactly does the BCM do?
The Body Control Module (BCM) is a computer that manages and controls many of your vehicle’s non-engine related functions. This includes power windows, locks, lights, security system, wipers, and various other comfort and convenience features.
Why do I need to send you my original BCM?
Your original BCM contains specific software and security information (like the VIN and key data) that is unique to your vehicle. By cloning this data to the replacement unit, we make the new module plug-and-play, eliminating the need for expensive dealership programming.
How long does the service take?
Once we receive your original module, the cloning and programming process typically takes 1-2 business days. We then ship the replacement module back to you. Return shipping time will depend on your location.
Is this installation difficult?
The physical installation is generally straightforward for someone with basic mechanical skills. The BCM is often located under the dashboard or steering column. The main benefit of our service is that it removes the difficult and costly programming step.
What if my original BCM is completely dead or water damaged?
In many cases, even if the BCM is non-functional, we can still extract the necessary data from the memory chip. If you suspect severe damage, please contact us before ordering to discuss the situation. We have a high success rate even with damaged modules.
Do I need to return my old BCM after I receive the replacement?
No, there is no core charge for this service. You only need to send your original BCM to us for the initial data cloning. We will not return the original module.