Restore Full Functionality and End Electrical Frustrations
If you’re dealing with bizarre electrical issues in your GM truck or car—like power windows with a mind of their own, flickering dashboard lights, or a security system that prevents your vehicle from starting—the culprit is often a failing Body Control Module (BCM). As the central command center for your vehicle’s body electronics, a faulty BCM can cause widespread and confusing problems. This isn’t just an annoyance; it can be a significant safety and reliability issue. This service provides a reliable, cost-effective solution to get your vehicle back in perfect working order without the exorbitant costs and scheduling headaches of a dealership visit.
We offer a professional cloning service for BCM part number 13591519 and its interchanges. The process is simple: you purchase this service, send us your original BCM, and we transfer all the critical data—including VIN, mileage, and key information—to a fully tested replacement module. We then ship the ready-to-install BCM back to you. This means no additional programming is needed on your end. It’s a true plug-and-play fix designed for both savvy DIYers and professional mechanics who value efficiency.
Case Study: A Tricky Diagnosis
A customer brought in a 2015 Silverado 2500 with a complaint that was driving him crazy. The radio would randomly shut off, the dome light would flicker, and occasionally the power locks wouldn’t respond. He’d already replaced the battery and checked the main grounds. After hooking up my scan tool, I saw a handful of communication loss codes (U0140, U0155) pointing to the BCM. Instead of a costly new module and hours of programming, we used this exact cloning service. The customer shipped his module, got the programmed replacement back in a few days, and installed it himself in under 30 minutes. The ‘electrical gremlins’ were gone for good. It’s a testament to how effective this solution is.
Is Your GM Vehicle Exhibiting These BCM Failure Signs?
- ✔ Erratic or non-functional power windows, door locks, or interior/exterior lights.
- ✔ The security or anti-theft light stays on, preventing the engine from starting.
- ✔ The horn honks randomly or the alarm system malfunctions.
- ✔ Dashboard warning lights appear for multiple unrelated systems.
- ✔ Diagnostic trouble codes (DTCs) related to lost communication with the BCM, such as U0140.
- ✔ Complete loss of power to various accessories.
Your Straightforward Mail-In and Installation Process
- ✔ Place Your Order: Purchase this BCM cloning service. We will contact you with shipping instructions for your original module.
- ✔ Ship Your Original BCM: Carefully package and send your vehicle’s original BCM to us. Make sure your contact information is correct and included.
- ✔ We Handle the Programming: Upon receipt, our technicians will meticulously transfer all necessary data from your old module to the replacement unit.
- ✔ Receive Your Ready-to-Install Module: We ship the plug-and-play BCM back to you, typically within one business day of receiving your original. Tracking information will be provided.
- ✔ Install and Verify: Disconnect your vehicle’s battery. Remove the old BCM (often located under the steering column) and install the one we sent you. Reconnect the battery and test all functions.
Important Post-Installation Information
While our goal is a seamless plug-and-play experience, some vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag light is on after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the airbag system with the BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure correct brake light operation and stability control function.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Verified Fitment for a Wide Range of GM Models
This BCM cloning service is compatible with modules bearing part numbers 13594692, 13594768, 13593214, 13580690, 13591519, or 13594769. It fits the following vehicles:
- ATS: 2014
- CAPRICE / SS CAPRICE: 2014-2017
- CORVETTE: 2014
- CTS (Sdn, VIN A): 2014
- ESCALADE / ESCALADE ESV: 2015
- IMPALA (New Style): 2015-2019
- SIERRA 1500 / DENALI 1500: 2014
- SIERRA 2500 / 3500 PICKUP: 2015 (ID 13594692)
- SIERRA DENALI 2500 / DENALI 3500: 2015 (ID 13594692)
- SILVERADO 1500 PICKUP: 2014
- SILVERADO 2500 / 3500 PICKUP: 2015 (ID 13594692)
- SUBURBAN 1500: 2015
- TAHOE: 2015
- XTS: 2014
- YUKON / YUKON XL 1500: 2015
Frequently Asked Questions
Do I need to send my original BCM to you?
Yes, this is a cloning service. We require your original module to extract the vehicle-specific data and transfer it to the replacement BCM, ensuring a plug-and-play installation without needing a trip to the dealer.
What data is transferred from my old BCM?
We transfer all the essential information, including the Vehicle Identification Number (VIN), mileage, immobilizer/key data, and any vehicle-specific option configurations. This makes the module integrate seamlessly with your vehicle.
Is there a core charge for this service?
No, there is absolutely no core charge. You can keep your original, non-functional module after you receive the programmed replacement from us.
How long does the cloning process take?
We typically program and ship your replacement BCM within one business day of receiving your original module. The total turnaround time will depend on shipping times to and from our facility.
What if my original BCM is completely dead and won’t communicate?
In many cases, even if the BCM is failing, we can still extract the necessary data. If we encounter an issue where the data is not recoverable, we will contact you immediately to discuss options.