Restore Your Cadillac’s Electrical System with a Hassle-Free Solution
Are you battling bizarre electrical problems in your 2014 Cadillac XTS? Flickering lights, malfunctioning power windows, a radio with a mind of its own, or even a no-start condition can all point to one culprit: a failing Body Control Module (BCM). As the central command center for your vehicle’s body electronics, a faulty BCM can create a cascade of frustrating and seemingly unrelated issues. The dealership solution often involves expensive diagnostics, a costly new module, and hours of programming fees. We offer a smarter, more efficient path forward.
This is a professionally prepared BCM that is made ready for installation through our unique cloning service. You simply send us your original BCM, and we transfer all of its critical data—including VIN, key information, and specific vehicle options—to this replacement unit. The result? A true plug-and-play module that restores full functionality without requiring any additional programming or a trip to the dealer. It’s the most reliable and cost-effective way to get your luxury sedan back to perfect working order.
Case Study: A Tricky Diagnosis
I recently had a 2014 Cadillac XTS in the bay that was driving its owner crazy. The symptoms were all over the place: the driver’s side window would work intermittently, the interior lights would stay on, and occasionally the car wouldn’t recognize the key fob. The owner had already replaced the battery and checked all the fuses. After connecting my scan tool, I found a series of communication error codes (U-codes) pointing to the BCM. Instead of a new, un-programmed unit, we used our cloning service. Within a day of receiving the customer’s original module, we shipped back the cloned replacement. The installation took him less than an hour, and every single electrical gremlin was gone. This service saved him hundreds in dealership fees and weeks of potential downtime.
Is Your Vehicle Showing These Symptoms?
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, your 2014 XTS BCM is likely the cause:
- ✔ Unpredictable power windows, locks, or mirrors
- ✔ Interior or exterior lights that flicker, stay on, or don’t work at all
- ✔ The security system acting erratically or preventing the car from starting
- ✔ Inconsistent instrument cluster gauge operation
- ✔ Key fobs not being detected or working properly
- ✔ Communication error codes, such as U0140, stored in the system
A Straightforward Guide to Installation
Our cloning service makes the physical swap simple. Once you receive the programmed module from us, follow these general steps. For your 2014 Cadillac XTS, the BCM is typically located in the left front hinge pillar area.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Locate the BCM: Access the BCM by removing any necessary trim panels. In the XTS, this is often near the driver’s side A-pillar or kick panel area.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the Replacement: Mount the new, programmed BCM in the same location and securely re-attach the electrical connectors. You should hear a ‘click’ as they lock into place.
- Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all body functions—lights, windows, locks, radio, etc.—to confirm the repair is successful.
Important Post-Installation Notes
While our cloning makes this a near plug-and-play process, some vehicle systems may require a quick sync. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the airbag system with the new BCM. This is only necessary if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure correct brake light and stability control operation.
- Consult a Manual: Always refer to a factory service manual for your specific vehicle for detailed instructions and torque specs.
Verified Vehicle Compatibility
This BCM is a direct replacement for part numbers 13594692, 13594768, 13593214, 13580690, 13591519, and 13594769. It is guaranteed to fit the following vehicles:
- Cadillac ATS: 2014
- Cadillac CTS: 2014 (Sdn, VIN A)
- Cadillac Escalade / ESV: 2015
- Cadillac XTS: 2014
- Chevrolet Caprice / SS Caprice: 2014-2017
- Chevrolet Corvette: 2014
- Chevrolet Impala: 2015-2019 (New Style)
- Chevrolet Silverado 1500 / 2500 / 3500: 2014-2015
- Chevrolet Suburban 1500: 2015
- Chevrolet Tahoe: 2015
- GMC Sierra 1500 / 2500 / 3500 (including Denali): 2014-2015
- GMC Yukon / Yukon XL 1500: 2015
Please verify your part number or contact us with your VIN to ensure compatibility before ordering.
Frequently Asked Questions
How does the cloning service work?
After you place your order, we will provide you with instructions to ship your original BCM to us. We then use specialized equipment to extract the unique data from your module and transfer it to the replacement unit. This ensures all your vehicle’s features and security information work perfectly upon installation.
Do I need to send my original BCM?
Yes, sending us your original module is required. This is the only way we can perform the data cloning service that makes the replacement BCM a true plug-and-play solution, saving you from expensive dealership programming.
How long does the process take?
We typically clone and ship your replacement module within 24-48 hours of receiving your original BCM. We will send you a tracking number as soon as it’s on its way back to you.
Is there a core charge?
No, there is no core charge for this service. You can keep your original, non-working module after we have completed the cloning process.
Will this fix my specific problem?
This part is a solution for failures within the Body Control Module itself. While it resolves the vast majority of common electrical issues listed, proper vehicle diagnosis is always recommended. If you’re unsure, consult a professional mechanic or contact us for advice.