Restore Full Electronic Control to Your Vehicle
The Body Control Module, or BCM, is the central command center for your vehicle’s electronic accessories. It manages everything from your power windows and door locks to the interior lights, security system, and instrument cluster. When the BCM begins to fail, it can cause a cascade of confusing and frustrating electrical problems that can be difficult to diagnose. If your Corvette, Sierra, or other compatible GM vehicle is experiencing these issues, a faulty BCM is the likely culprit. This listing is for a comprehensive programming service that provides you with a fully functional, ready-to-install BCM, solving the problem without the exorbitant costs and hassle of a dealership visit.
Common Symptoms of a Failing BCM
A failing Body Control Module can manifest in numerous ways. If you’re noticing any of the following issues, it’s a strong indicator that your BCM needs attention:
- ā Erratic or non-functional power windows, door locks, or mirrors.
- ā Interior or exterior lights flickering, staying on, or not turning on at all.
- ā The vehicle’s security system engaging randomly or preventing the car from starting.
- ā Keyless entry remote not working consistently.
- ā Instrument panel gauges behaving erratically or warning lights appearing for no reason.
- ā Climate control (HVAC) system not responding to commands.
- ā Intermittent no-start conditions where the engine cranks but won’t fire up.
The Simple, Plug-and-Play Solution
Traditionally, replacing a BCM meant buying an expensive new part and having the vehicle towed to a dealership for programming. Our professional cloning service eliminates this entire process. We transfer the critical data from your original, failing BCM directly onto a replacement module. This data includes your vehicle’s unique VIN, mileage, security information, and specific electronic options. The result is a BCM that is 100% plug-and-play. Simply install it, and your vehicle will recognize it as the original, restoring all functions immediately.
How Our BCM Programming Service Works:
- ā Place Your Order: Complete your purchase through our secure checkout.
- ā Receive Instructions: We will contact you via email or phone with detailed instructions on how to remove and where to ship your original BCM.
- ā Ship Your Module: Carefully package your original BCM and send it to our facility.
- ā We Program Your Replacement: Upon arrival, our technicians will perform a 1-to-1 data transfer from your module to a replacement unit.
- ā Receive Your Ready-to-Install BCM: We ship the programmed module back to you, typically within one business day. You’ll receive tracking information so you know exactly when it will arrive.
Your Guide to a Simple 2014 Corvette BCM Installation
Because our service clones your existing data, the installation of your replacement 2014 Corvette BCM is straightforward. In most cases, it is a direct swap. However, in some vehicles, certain safety systems may require a simple sync procedure after the new module is connected. These are not complex programming tasks and can often be performed with a high-level diagnostic tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed. This syncs the new BCM with the airbag system’s Sensing and Diagnostic Module (SDM) to ensure they communicate correctly.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary. This ensures your brake lights and traction control system function as intended.
Please note: Specific procedures can vary by vehicle. We always recommend consulting a factory service manual or a qualified technician for guidance.
Guaranteed Compatibility and Fitment
This service is compatible with a wide range of General Motors vehicles. This module will fit vehicles requiring the following part numbers:
13594692, 13594768, 13593214, 13580690, 13591519, 13594769
It is a direct solution for models including the 2014 Corvette, various years of the Cadillac ATS, CTS, XTS, Escalade; Chevrolet Caprice, Impala, Silverado, Suburban, Tahoe; and GMC Sierra and Yukon models. Please verify the part number on your original module to ensure a perfect match.
Frequently Asked Questions
What is a BCM cloning service?
Cloning is a process where we extract the essential vehicle-specific data (like VIN, mileage, and key programming) from your original BCM and write it onto a replacement module. This makes the replacement unit an exact electronic match for your car, allowing it to be installed without any additional programming.
Is this replacement 2014 Corvette BCM truly plug-and-play?
Yes, in over 99% of cases, the module is completely plug-and-play. You simply install it and the vehicle will operate normally. In rare instances, a simple relearn procedure, like for the airbag system, may be needed, which can be done with a professional scan tool.
What if my original BCM is completely dead or cannot be read?
In many cases, even if the BCM is non-functional in the vehicle, we can still extract the necessary data on our bench-testing equipment. Please contact us before ordering if your module has severe water or fire damage.
How long does the programming service take once you receive my module?
Our standard turnaround time is very fast. We typically program and ship your replacement BCM within 24-48 hours of receiving your original module.
Do I need to send my keys or any other parts with the BCM?
No, you only need to send us your original Body Control Module. Since we are cloning the key data, your existing keys will work seamlessly with the replacement module upon installation.
Is there a core charge for this service?
No, there is no core charge. The service price includes the replacement BCM and the programming labor. You can keep your original module.