Programmed 2014 Corvette BCM 13594768 | Plug & Play Cloning Service

End Your Vehicle’s Electrical Chaos.

Stop chasing frustrating electrical gremlins. This Body Control Module (BCM) comes pre-programmed with your car’s data via our simple mail-in cloning service. It’s a true plug-and-play solution that fixes issues with lights, locks, and starting, saving you an expensive trip to the dealership for programming. No core charge required. Order today and restore your vehicle’s reliability!

$249.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-04039-100 Categories: , ,
Guaranteed Safe Checkout

Restore Your Vehicle’s Brain without the Dealership Headache

Are you chasing down bizarre electrical gremlins in your vehicle? Flickering lights, power windows with a mind of their own, a security system that won’t cooperate, or even a frustrating no-start condition? Before you lose your patience, the culprit is often the Body Control Module (BCM)—the central command center for your car’s comfort and convenience features. Replacing it used to mean an expensive part followed by a mandatory, costly trip to the dealership for programming. Our plug-and-play BCM cloning service eliminates that entire ordeal.

This service provides you with a fully functional replacement BCM, part number 13594768, that is precisely programmed with your vehicle’s original data. The process is simple: you send us your original BCM, we expertly transfer all the critical information (like VIN, key data, and specific options) to this replacement unit, and ship it back to you ready for installation. It’s the most efficient and reliable way to get your car back to 100% without the dealership’s high costs and scheduling delays.

Case Study: A Tricky Diagnosis

I remember a 2014 Corvette that came into the shop with a laundry list of intermittent issues. The dome lights would stay on, the radio would randomly shut off, and the key fob was only working half the time. The owner had already replaced the battery and checked all the fuses. Diagnostics were pointing towards a communication breakdown, but no single component was flagging a hard fault. This is a classic BCM failure scenario. In my 20+ years, I’ve seen hundreds of these cases where the BCM slowly fails, causing chaos across the vehicle’s network. A cloned module like this one would have solved his problem in an afternoon, saving him hundreds in diagnostic labor alone.

Common Signs of a Failing BCM

If your vehicle is experiencing any of these symptoms, a faulty BCM is a likely cause. A failing module can often trigger communication-related Diagnostic Trouble Codes (DTCs), such as U0140 (Lost Communication With Body Control Module).

  • ✔ Unresponsive or erratic power windows, door locks, and interior/exterior lights.
  • ✔ Horn honking unexpectedly or not working at all.
  • ✔ Security system faults or anti-theft light staying illuminated.
  • ✔ Intermittent no-start or no-crank conditions.
  • ✔ Inaccurate gauge readings on the instrument cluster.
  • ✔ Problems with the HVAC (heating and air conditioning) controls.
  • ✔ Key fobs not being recognized by the vehicle.

A Straightforward Guide to Installation

Installing your pre-programmed BCM is a manageable job for a confident DIYer or any professional mechanic. The location varies slightly by model, but it’s typically found in the driver’s side dash area. For a 2014 Corvette BCM, it is located in the left-hand (LH) side of the dash.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down.
  2. Locate the BCM: On most listed vehicles, the BCM is under the steering column or on the left side of the dash/firewall. A quick search for your specific model will confirm its exact position.
  3. Remove Trim Panels: You may need to remove a few plastic trim panels to gain clear access to the module. Take your time and use a trim removal tool to avoid breaking any clips.
  4. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
  5. Install the New BCM: Mount your new, pre-programmed BCM in the same location and reconnect all the electrical connectors. Ensure they click securely into place.
  6. Reassemble and Reconnect: Reinstall any trim panels you removed and reconnect the negative battery terminal.

Important Post-Installation Steps

Because this module is cloned from your original, most functions will work immediately. However, in some cases, a couple of quick relearn procedures may be necessary. This is normal and ensures all related vehicle systems are properly synced.

  • Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be required to ensure proper brake light and traction control operation.

Will This Fit My Vehicle?

This BCM is a direct replacement for part numbers 13594692, 13594768, 13593214, 13580690, 13591519, and 13594769. It is guaranteed to fit the following vehicles. Please verify your part number or consult the list below:

  • ATS (2014)
  • Caprice / SS Caprice (2014-2017)
  • Corvette (2014)
  • CTS (2014) – Sedan, VIN A (4th digit, New Style)
  • Escalade / Escalade ESV (2015)
  • Impala (2015-2019)
  • Sierra 1500 / Denali 1500 (2014)
  • Sierra 2500 / 3500 / Denali (2015) – ID 13594692
  • Silverado 1500 (2014)
  • Silverado 2500 / 3500 (2015) – ID 13594692
  • Suburban 1500 (2015)
  • Tahoe (2015)
  • XTS (2014)
  • Yukon / Yukon XL 1500 (2015)

Frequently Asked Questions

How does the cloning service work?

After you place your order, we will provide you with instructions to ship your original BCM to us. Once we receive it, our technicians will transfer all the necessary programming and security data to the replacement module. We then ship the plug-and-play replacement back to you.

Do I really need to send in my old part?

Yes. This is not just a part sale; it’s a programming service. Sending us your original module is the only way to ensure the replacement is a 100% plug-and-play match for your vehicle’s specific configuration, including keys and options.

Is there a core charge?

No, there is no core charge. We use your original module for data transfer only, and you are welcome to keep it afterward.

Will I need a scan tool after installation?

In most cases, no. The module is pre-programmed to work upon installation. However, as noted, some vehicles may require a ‘Brake Pedal Position Relearn’ or an ‘Airbag System Sync’ if a warning light appears. These procedures require a professional-grade scan tool.

How long does the service take?

We typically program and ship the replacement module within one business day of receiving your original BCM. You will receive tracking information as soon as it ships.

Year

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

CORVETTE

Make

Brand

GM

MPN

13594768

Manufacturer Part Number

, , , , ,

Manufacturer Warranty

1 Year

Year

2015

Scroll to Top