Is Your Cadillac SRX Experiencing Strange Electrical Issues?
Dealing with unpredictable electronics in your 2014, 2015, or 2016 Cadillac SRX can be incredibly frustrating. One moment everything works perfectly, and the next, your power windows refuse to budge, the dashboard lights flicker, or the security alarm goes off for no reason. These aren’t just minor annoyances; they are classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it starts to malfunction, it can create a cascade of confusing and disruptive problems.
Common Failure Symptoms
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, your BCM is the most likely culprit:
- ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
- ✔ Interior or exterior lights (headlights, taillights) flickering, staying on, or not working.
- ✔ The vehicle’s security system or keyless entry malfunctioning.
- ✔ Warning lights appearing on the instrument cluster without a clear cause.
- ✔ Unexplained battery drain that leads to a no-start condition.
- ✔ Wipers or radio behaving erratically.
The Simple, No-Dealer-Needed Solution: Your 2014-2016 SRX Body Control Module
Traditionally, replacing a BCM meant a trip to the dealership for expensive parts and even more expensive programming. Our unique programming service eliminates that hassle entirely. We provide a replacement 2014-2016 SRX Body Control Module that is a direct, plug-and-play solution for your vehicle. We achieve this by transferring the critical data from your original, failing BCM directly onto the replacement unit. This process, often called ‘cloning’, ensures that the replacement module has your vehicle’s specific key codes, VIN, and other security information, allowing it to integrate seamlessly with your SRX’s other computer systems.
How Our Programming Service Works
We’ve streamlined the process to get you back on the road as quickly as possible:
- Place Your Order: Add this item to your cart and complete your purchase.
- We Contact You: After your order is placed, we will reach out with clear, simple instructions on how to ship your original BCM to our facility. Please ensure your contact information is accurate.
- Data Transfer: Once we receive your original module, our technicians will professionally transfer all necessary data to the replacement BCM.
- Return Shipping: We ship the fully programmed, ready-to-install BCM back to you, typically within 1-2 business days of receiving your original part. We will provide you with tracking information as soon as it ships.
Important Post-Installation Procedures
While our goal is a plug-and-play installation, some GM vehicles may require minor recalibration procedures after the new BCM is installed. These are standard procedures that can be performed with a professional scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the airbag system with the new BCM. This is only required if the light is on.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be needed to ensure proper function of the brake lights and traction control system.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment
This 2014-2016 SRX Body Control Module is a direct replacement for the following part numbers and fits the listed vehicles. Please verify your part number before ordering.
Compatible Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
Fits The Following Models:
- 2014-2016 SRX (LH dash)
- 2014-2015 LACROSSE (LH kick panel)
- 2016 LACROSSE (LH kick panel, ID 13580698 or 13594564)
- 2014-2015 MALIBU (LH kick panel)
- 2016 MALIBU (VIN 1, Limited, LH kick panel)
- 2014-2017 REGAL (LH dash)
- 2014-2015 VOLT (RH engine compartment)
- 2014-2016 ELR (RH cowl / RH engine compartment)
- 2014-2015 CAMARO (RH dash)
- 2014-2016 SPARK (EV model, left lower a-pillar)
Frequently Asked Questions
What exactly is a ‘cloning’ or programming service?
We extract the unique, vehicle-specific data (like VIN, key codes, and security settings) from your original BCM and flash it onto the replacement unit. This makes the new module an exact digital copy of your old one, allowing it to work in your car without any additional programming from a dealer.
How long does the entire process take?
Once we receive your original module, our service typically takes 1-2 business days. The total time will depend on shipping times to and from our facility. We will send you tracking information for the return journey.
Is this part difficult to install?
The BCM in the SRX is located on the left-hand side of the dash. While physical installation is straightforward for someone with moderate mechanical skill (disconnecting the battery and swapping connectors), we always recommend professional installation to ensure everything is handled correctly, including any post-install procedures.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is not functioning in the vehicle, we can still extract the necessary data on our bench-testing equipment. Please contact us before ordering if your module is severely damaged by water or fire.
Do I need to send my keys with the module?
No, you do not need to send your keys. Because we are transferring all the original data, the replacement BCM will recognize your existing keys just like the original one did.