Restore Full Electronic Functionality to Your Vehicle
Is your Chevrolet Spark, Malibu, or other GM vehicle exhibiting bizarre electrical behavior? Flickering lights, malfunctioning power windows, or a security system that acts on its own are common signs of a failing Body Control Module (BCM). The BCM is the central command center for your car’s body electronics, and when it fails, it can cause a cascade of frustrating and seemingly unrelated issues. This listing offers a reliable and straightforward solution: a replacement Body Control Module, part number 13580698, that is professionally programmed with your vehicle’s original data.
From the Diagnostic Bay
We recently had a 2015 Chevy Malibu come into the shop with a laundry list of complaints. The dome lights would stay on, the key fob worked intermittently, and the radio would randomly shut off. The owner had already replaced the battery and checked fuses with no luck. After connecting our diagnostic scanner, we saw multiple communication codes pointing to the BCM. Instead of a costly new module and programming at the dealer, we performed a cloning service just like this one. By transferring the data from the old, failing BCM to a quality replacement, we had the car back to 100% functionality in a day, saving the customer significant time and money.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Interior or exterior lights flickering, staying on, or not turning on at all.
- ✔ Erratic behavior from the car alarm or security system.
- ✔ Key fob not being recognized or working inconsistently.
- ✔ Warning lights appearing on the dashboard for no apparent reason.
- ✔ Issues with the radio, climate control, or other interior accessories.
The Simple, Plug-and-Play Cloning Service
Modern vehicles have complex security and options data stored within the BCM. Simply swapping a used module from another car will not work and can even prevent the vehicle from starting. Our professional cloning service is the key to a successful repair. The process is designed to be as simple as possible for you:
- Place Your Order: Purchase this service. Ensure your contact information is accurate.
- We Contact You: Our team will reach out with clear, step-by-step instructions for shipping your original BCM to our facility.
- Data Transfer: Once we receive your module, our technicians will expertly extract all critical data—including VIN, key programming, and vehicle-specific options—and flash it onto the replacement unit.
- Shipped Back to You: We ship the fully programmed, ready-to-install BCM back to you, typically within 1-2 business days. You will receive tracking information as soon as it’s on its way.
This service completely bypasses the need for expensive dealership tools or programming appointments. The module you receive will be a true plug-and-play component for your exact vehicle.
Installation and Post-Install Notes for your 2014-2016 Spark Body Control Module
Installation is straightforward. For the 2014-2016 Spark EV, the BCM is typically located at the left lower A-pillar. For other models, it may be in the LH kick panel or dash area. Once installed, in most cases, no further action is needed. However, depending on your vehicle’s specific configuration, a couple of procedures may be required:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure correct brake light and traction control operation.
Guaranteed Fitment
This Body Control Module is a direct replacement for the following part numbers and fits the listed vehicles. Please verify your part number before ordering.
Compatible Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
Vehicle Compatibility:
- 2014-2016 SPARK (EV model)
- 2014-2016 LACROSSE
- 2014-2016 MALIBU (including 2016 Limited)
- 2014-2015 VOLT
- 2014-2016 ELR
- 2014-2017 REGAL
- 2014-2015 CAMARO
- 2014-2016 SRX
Frequently Asked Questions
Why do I need to send my original BCM to you?
Your original BCM contains your vehicle’s unique VIN, security information, and settings for its specific options. By cloning this data to the replacement module, we create a true plug-and-play part, saving you from a costly trip to the dealership for programming.
Is this BCM truly plug-and-play?
Yes. Because we transfer all the data from your original module, the replacement unit will be ready for installation with no additional programming required. In some rare cases, a simple relearn procedure as noted above may be necessary.
How long does the programming service take?
Once we receive your original module, the cloning and testing process typically takes 1-2 business days. We will then ship the finished module back to you.
What if my original module is severely damaged or unreadable?
In the rare event that your module has suffered extreme water or fire damage and the data cannot be retrieved, we will contact you immediately to discuss options. If we cannot perform the service, we will issue a full refund.
Will this fix my specific electrical problem?
This part resolves issues directly caused by a faulty BCM. While the symptoms listed are very common, we always recommend a proper diagnosis by a qualified technician to confirm the BCM is the root cause of your problem before purchasing.