Restore Control Over Your Vehicle’s Electronics
Are you dealing with frustrating and unpredictable electrical problems in your 2014-2016 Chevrolet Spark EV? Flickering lights, malfunctioning power windows or locks, a security system that acts up, or even a no-start condition can often be traced back to a single component: a failing Body Control Module (BCM). As an expert with over two decades of hands-on diagnostic experience, I’ve seen how a faulty BCM can turn a reliable car into a source of daily headaches. It’s the central hub for your vehicle’s body electronics, and when it fails, chaos ensues.
This isn’t just a replacement part; it’s a complete, hassle-free solution. We offer a professionally programmed Body Control Module that is a direct-fit replacement for your vehicle. The process is simple: you send us your original BCM, and we transfer all the critical vehicle-specific data—including VIN, mileage, and key information—to this replacement unit. The result? A true plug-and-play module that restores full functionality without requiring a trip to the dealership for expensive programming.
Is Your Spark Showing These Telltale BCM Failure Signs?
- ✔ Erratic or non-working interior and exterior lights.
- ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
- ✔ The security system or keyless entry failing to work correctly.
- ✔ Unexplained battery drain when the vehicle is off.
- ✔ Instrument cluster warning lights (like the airbag light) illuminating for no reason.
- ✔ Diagnostic trouble codes (DTCs) related to communication, such as U0140, U0155, or other U-codes.
A Technician’s Notebook
I recently had a 2015 Spark EV in the shop with a classic case of BCM failure. The owner reported the car would sometimes refuse to start, and the radio and interior lights would flicker randomly. A scan showed multiple communication codes pointing to the BCM. The location of the BCM in the Spark, at the left lower A-pillar, makes it susceptible to moisture intrusion from a leaky windshield seal. After confirming the BCM was the culprit, we used our cloning service. The customer had their car back in a few days, running perfectly, having saved hundreds compared to the dealership’s quote for a new module and programming.
Your Straightforward Path to a Reliable Repair
- ✔ Place Your Order: Purchase this BCM programming service. Ensure your contact information is accurate.
- ✔ We’ll Be in Touch: Our team will contact you with simple instructions and a shipping address for sending us your original BCM.
- ✔ Ship Your Original Module: Carefully package and ship your vehicle’s original BCM to our facility.
- ✔ Expert Programming: Once we receive it, our technicians will professionally clone all necessary data to the replacement BCM, typically within one business day.
Post-Installation Checks
Our programming service handles all the critical data, but some vehicle systems may require a quick sync after the BCM is reconnected. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This is a simple task for any shop with a professional diagnostic tool.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn might be necessary to ensure perfect brake light and traction control operation.
Verified Vehicle Compatibility
This Body Control Module service is compatible with a wide range of GM vehicles. Please verify your part number is on this list: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564.
This part will fit these makes and models with these options:
- Chevrolet Spark: 2014-2016 (Electric model EV, left lower a-pillar)
- Chevrolet Camaro: 2014 (Conv, RH dash), 2015 (RH dash)
- Chevrolet Malibu: 2014-2015 (LH kick panel), 2016 (VIN 1, Limited, LH kick panel)
- Chevrolet Volt: 2014-2015 (RH engine compartment)
- Buick LaCrosse: 2014-2015 (LH kick panel), 2016 (LH kick panel, ID 13580698 or 13594564)
- Buick Regal: 2014-2017 (LH dash)
- Cadillac ELR: 2014-2016 (Body Control, RH cowl), 2016 (Communication, RH engine compartment)
- Cadillac SRX: 2014-2016 (LH dash)
Frequently Asked Questions
Frequently Asked Questions
Why is cloning my original BCM better than just buying a new one?
Cloning transfers your vehicle’s exact immobilizer and options data. This makes the replacement module 100% plug-and-play, avoiding the need for expensive and complex programming at a dealership. It’s the most reliable way to ensure all your car’s features work correctly from the moment of installation.
What data is transferred during the programming service?
We transfer the Vehicle Identification Number (VIN), security information (key data), mileage, and all factory-installed option configurations. This ensures a seamless integration with your car’s other electronic modules.
Is this service difficult for a DIY mechanic?
Not at all! The physical removal and installation of the BCM is straightforward for most DIY enthusiasts. Our service handles the complex programming part. You just swap the module, and you’re done.
How long does the programming service take?
We pride ourselves on a fast turnaround. Once we receive your original module, we typically complete the programming and ship your replacement BCM back out within one business day.
Do I need to send my keys with the module?
No, you do not need to send your keys. Our cloning process transfers all the necessary security data from your original module, so your existing keys will work perfectly with the newly programmed BCM.
What is your core policy?
There is no core charge for this service. You can keep your original, non-working module.