Tired of Chasing Electrical Gremlins in Your Malibu?
If you’re dealing with baffling electrical issues in your 2014-2016 Chevrolet Malibu—like power windows with a mind of their own, a security light that won’t turn off, or frustrating intermittent starting problems—you’ve likely met the culprit: a failing Body Control Module (BCM). As the central command center for your car’s body electronics, when the BCM goes bad, it can create a cascade of confusing and unpredictable symptoms. Taking it to the dealership often means expensive diagnostic fees, a hefty bill for a new module, and additional charges for programming that requires special tools.
We offer a smarter, more affordable solution. This is a replacement BCM that comes fully programmed with your vehicle’s exact data. How? Through our simple and reliable mail-in cloning service. You send us your original BCM, and we transfer all the critical information—including VIN, mileage, and key data—to this replacement unit. When you get it back, it’s a true plug-and-play installation. No dealership visits, no extra programming fees, just a straightforward fix that gets you back on the road with confidence.
A Technician’s Notebook
I remember a 2015 Malibu that came into the shop with a laundry list of complaints from the owner. The radio would cut out, the driver’s side power lock was dead, and the car would randomly refuse to start. The customer had already replaced the battery and checked fuses with no luck. After hooking up the scan tool, I saw a dozen communication error codes (U-codes) pointing to a network failure. In my 20+ years of experience, this pattern almost always leads back to the BCM. We confirmed it was a faulty BCM, but the customer dreaded the cost and time of a dealership repair. Our cloning service was designed for exactly this scenario—it provides a reliable part that’s already synced to the vehicle, saving hundreds of dollars and days of downtime.
Common Signs of a Failing BCM
A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following, your Body Control Module is the likely cause:
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ The anti-theft or security light stays on, preventing the car from starting.
- ✔ Interior or exterior lights flickering, staying on, or not working.
- ✔ The key fob is unresponsive or works intermittently.
- ✔ Multiple, unrelated warning lights on the dashboard (e.g., ABS, Airbag).
- ✔ Diagnostic trouble codes (DTCs) related to communication failures, such as U0100, U0140, or B-series codes.
Your Simple Mail-In and Installation Process
Our process is designed to be as simple as possible for both DIY enthusiasts and professional mechanics. Here’s how it works:
- Step 1: Place your order. We will contact you with detailed instructions and the shipping address for your original module. Please ensure your contact information is correct.
- Step 2: Carefully remove the original BCM from your vehicle. On most Malibus, it’s located in the driver’s side (LH) kick panel area.
- Step 3: Securely package and ship your original BCM to us.
- Step 4: Once we receive your module, our technicians will perform the data cloning to the replacement unit, typically within 1-2 business days.
- Step 5: We ship your new, programmed BCM back to you with tracking information.
- Step 6: Install the programmed BCM, reconnect the negative battery terminal, and start your vehicle. All your original functions and keys will work perfectly.
Why Choose Our Programmed 2014-2016 Malibu BCM?
This isn’t just a part; it’s a complete solution. By cloning your original data, we eliminate the need for costly and complex on-vehicle programming. This service ensures that the replacement module is perfectly matched to your car’s specific configuration, including anti-theft systems and optional features. Plus, with no core charge, you can keep your original module. It’s the most efficient and cost-effective way to restore your Malibu’s functionality.
Important Post-Installation Information
In most cases, this is a direct plug-and-play installation. However, with complex vehicle systems, a couple of scenarios may arise:
- Airbag System Sync: If your airbag warning light is illuminated after installation, a simple ‘Setup SDM Primary Key in BCM’ procedure may be needed. This syncs the airbag system with the new BCM and requires a professional-grade scan tool.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn might be necessary to ensure brake lights and traction control function correctly.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step.
Verified Compatibility Across GM Models
This Body Control Module is a direct fit for the following vehicles, matching part numbers 13591300, 13580698, 13578458, 13589115, and others listed below. Please verify your part number or vehicle application before ordering.
- Chevrolet Malibu: 2014-2015 (LH kick panel)
- Chevrolet Malibu Limited: 2016 (VIN 1, LH kick panel)
- Chevrolet Volt: 2014-2015 (RH engine compartment)
- Chevrolet Camaro: 2014-2015 (RH dash)
- Chevrolet Spark EV: 2014-2016 (Left lower a-pillar)
- Buick LaCrosse: 2014-2016 (LH kick panel)
- Buick Regal: 2014-2017 (LH dash)
- Cadillac ELR: 2014-2016 (RH cowl / RH engine compartment)
- Cadillac SRX: 2014-2016 (LH dash)
Frequently Asked Questions
What exactly is BCM ‘cloning’?
Cloning is the process of reading all the essential, vehicle-specific data (like the VIN, key codes, and security information) from your original BCM and writing it directly onto the replacement module. This makes the new module an exact digital copy of the old one, eliminating the need for dealership programming.
Will I need to have this BCM programmed by a dealer?
No. Our cloning service handles all the programming before we ship the part to you. Once you receive it, it’s ready to install and will work with your existing keys and systems immediately.
How long does the programming service take?
Once we receive your original BCM, the cloning and processing time is typically 24-48 business hours. We then ship the programmed replacement module back to you.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM has failed, we can still extract the necessary data. Please contact us before ordering if your module is severely damaged (e.g., by water or fire) or if a technician has confirmed it is non-communicative.
Do I need to send my keys with the module?
No, you do not need to send your keys. All the necessary key information is stored within the BCM data itself, which we will transfer during the cloning process.
What is a core charge? Do I have to send my old part back?
There is no core charge for this item. Our service requires you to send your original BCM to us for the data transfer, but you do not need to return it after you receive the programmed replacement.