Restore Your Vehicle’s Electrical System with a Plug-and-Play BCM
Are you battling frustrating electrical gremlins in your 2014-2016 Chevrolet Malibu or other compatible GM vehicle? Issues like flickering interior lights, unresponsive power windows, erratic door locks, or a security system that acts up on its own are classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your car’s body electronics, and when it fails, it can cause a cascade of confusing and annoying problems. Dealerships often charge a small fortune for a new module plus mandatory programming fees. We offer a smarter, more affordable solution.
This listing is for our professional BCM cloning service. You send us your original, faulty BCM, and we transfer all of its critical data—including key programming, security information, and vehicle-specific options—to this fully tested replacement module. We then ship the programmed unit back to you, ready for installation. This process makes the replacement a true plug-and-play fix, eliminating the need for expensive dealer-only tools or programming appointments. It’s the most direct path to getting your car back to normal.
A Technician’s Notebook: The Intermittent Malibu Mystery
I remember a 2015 Malibu that came into the shop with a list of symptoms that drove the owner crazy. The radio would sometimes not turn on, the driver’s side window would work one day and not the next, and the key fob range was practically nonexistent. There were no check engine lights, just a handful of communication codes (U-codes) that would come and go. After checking grounds and wiring harnesses, we isolated the issue to the BCM. Instead of a costly new unit and programming from scratch, we performed a clone service like this one. The customer had their car back in a few days with all electrical functions restored, saving them hundreds compared to the dealer quote. This is a common failure, and cloning is the most efficient fix.
Is Your Vehicle Showing These Symptoms?
A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following, your Body Control Module is the likely culprit:
- ✔ Power windows or door locks operating intermittently or not at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The anti-theft or security system light is on, or the car won’t start.
- ✔ Key fobs are not working or have a very short range.
- ✔ The dashboard displays incorrect information or warning lights.
- ✔ Communication Diagnostic Trouble Codes (DTCs) are present, such as U0140, U0155, or other U-series codes.
Our Simple Mail-In Cloning Process
- ✔ Step 1: Place Your Order. Purchase this service and ensure your contact information is accurate.
- ✔ Step 2: We Contact You. Our team will reach out with detailed instructions and the shipping address to send your original BCM.
- ✔ Step 3: Ship Us Your Module. Carefully package and ship your original BCM to our facility.
- ✔ Step 4: We Program Your Replacement. Upon arrival, we will expertly clone all the necessary data from your old module to the new one, typically within 24-48 hours.
- ✔ Step 5: We Ship It Back. We ship your plug-and-play replacement BCM back to you and provide you with tracking information.
A Straightforward Guide to Installation
Once you receive your programmed module, installation is simple. For a 2014-2016 Malibu, the BCM is typically located in the driver’s side (LH) kick panel area. While locations vary on other models, the process is similar.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on electrical components.
- Locate the BCM: Access the module by removing any necessary trim panels. On the Malibu, this is the panel by the driver’s left foot.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be pressed. Once disconnected, remove the bolts or clips holding it in place.
- Install the New BCM: Mount your newly programmed module in the same location and securely reconnect all electrical connectors.
- Reconnect Power: Re-attach the negative battery terminal. Your vehicle’s body functions should now be restored.
Important Post-Installation Notes
In some cases, minor follow-up procedures may be needed:
- Airbag System Sync: If your airbag warning light is on after installation, a professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure correct brake light and traction control operation.
- No Core Charge: You are not required to send your old part back to us after the service is complete. You can keep your original module.
Disclaimer: Vehicle systems vary. Always refer to a factory service manual or a qualified technician for procedures specific to your vehicle.
Verified Vehicle Compatibility
This module and service are compatible with a wide range of GM vehicles. Please verify your part number is on our list. This part is a direct replacement for part numbers 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, and 13594564.
- Buick LaCrosse: 2014-2016
- Buick Regal: 2014-2017
- Cadillac ELR: 2014-2016
- Cadillac SRX: 2014-2016
- Chevrolet Camaro: 2014-2015
- Chevrolet Malibu: 2014-2015
- Chevrolet Malibu Limited: 2016 (VIN 1)
- Chevrolet Spark EV: 2014-2016 (Electric Model)
- Chevrolet Volt: 2014-2015
Frequently Asked Questions
Frequently Asked Questions
How does the cloning service work?
You purchase the service and ship your original BCM to us. We extract the vehicle-specific software and security data and flash it onto the replacement module. We then ship the programmed, ready-to-install module back to you.
Why is this better than buying a new BCM from a dealer?
Our service saves you significant money by avoiding expensive dealership parts and programming labor. The module you receive is plug-and-play, meaning you or your mechanic can install it without needing special dealer software.
How long does the process take?
Once we receive your module, the programming service is typically completed within 24-48 business hours. The total time depends on shipping transit times.
Do I need to send my keys?
No, you do not need to send your keys. All the necessary immobilizer and key data is stored within your original BCM, which is what we transfer.
Is this a guaranteed fix for my car’s problems?
This service corrects issues caused by a faulty BCM. While the symptoms listed are very common for BCM failure, we always recommend a proper diagnosis by a qualified mechanic to confirm the BCM is the root cause before ordering.
What is your warranty policy?
We provide a comprehensive warranty on the functionality of the module and the integrity of our programming service. Please refer to the warranty tab for specific details and duration.