Restore Full Functionality to Your Vehicle’s Electronics
Is your 2014-2015 Chevrolet Volt or other compatible GM vehicle suffering from strange and unpredictable electrical problems? Issues like flickering lights, malfunctioning power windows and locks, or random warning messages on the dash are often caused by a failing Body Control Module (BCM). The BCM acts as the central hub for your car’s body electronics, and when it fails, it can create a cascade of frustrating issues. Dealerships often charge a fortune for a new module plus the expensive programming required to sync it with your vehicle. Our service offers a smarter, more affordable solution.
We provide a replacement BCM that is precisely programmed with the data from your vehicle’s original module. This cloning process ensures that the replacement unit is a perfect digital match, making the installation process truly plug-and-play. You avoid the high costs and scheduling headaches of a dealership visit. Simply send us your original BCM, and we’ll transfer all the necessary vehicle-specific information—including VIN, mileage, and key data—to a fully tested replacement unit and ship it back to you, ready for installation.
From the Diagnostic Bay
We had a 2015 Chevy Volt come into the shop with a list of bizarre symptoms. The owner said the interior lights would stay on, the radio would randomly turn off, and the key fob would only work intermittently. Initial scans showed a dozen communication error codes, all pointing to different systems. Instead of chasing each individual ghost, we focused on the common link: the BCM. After swapping in one of our programmed modules, every single issue vanished instantly. The car was back to normal without any additional programming. It’s a classic case of how a single failing module can make a perfectly good car seem like it’s falling apart.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional interior and exterior lights (headlights, dome lights, etc.).
- ✔ Power windows, door locks, or mirrors not working correctly.
- ✔ Intermittent or complete failure of the radio and infotainment system.
- ✔ False alarms from the security system or issues with the keyless entry.
- ✔ Warning lights on the dashboard for systems like ABS, Airbag, or Traction Control.
- ✔ Inability for diagnostic scan tools to communicate with the module.
- ✔ Battery drain while the vehicle is parked.
Why Choose Our Programmed 2014-2015 Volt Body Control Module?
Our professional cloning service is the most reliable and cost-effective way to solve your BCM issues. By transferring the data from your original unit, we eliminate the need for any post-installation programming, which typically requires specialized dealer tools. This means you or your mechanic can install the module and get your vehicle back on the road immediately. This service is a direct solution for the 2014-2015 Volt Body Control Module and a wide range of other GM vehicles, ensuring seamless integration and restored performance.
Simple & Straightforward Process:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We Contact You: We will reach out with clear instructions on how and where to ship your original BCM.
- ✔ Send Us Your Module: Carefully package and ship your original BCM to our facility.
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, some vehicle systems may require a simple sync procedure after the BCM is installed. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ must be performed with a professional-grade diagnostic tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to prevent issues with the traction control system.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment for Multiple Models
This BCM is a direct replacement for part number 13593775 and is compatible with a wide array of GM vehicles. It will also fit the following alternate part numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593776, and 13594564.
This part will fit these makes and models with these options:
- BUICK LACROSSE 2014-2016
- BUICK REGAL 2014-2017
- CADILLAC ELR 2014-2016
- CADILLAC SRX 2014-2016
- CHEVROLET CAMARO 2014-2015
- CHEVROLET MALIBU 2014-2016 (including Limited models)
- CHEVROLET SPARK 2014-2016 (EV models)
- CHEVROLET VOLT 2014-2015
Frequently Asked Questions
What is a Body Control Module (BCM)?
The BCM is a computer in your vehicle that controls and monitors a wide range of electronic accessories not related to the engine, such as power windows, locks, lights, wipers, and the security system. It’s the command center for passenger comfort and convenience features.
How does the cloning service work?
After you place your order, you ship your original BCM to us. We use specialized equipment to extract the unique, vehicle-specific data from it and flash that data onto a replacement module. This makes the new module an exact electronic copy of your old one, ensuring it works perfectly with your car’s existing systems without needing dealer programming.
Is this BCM truly plug-and-play?
Yes, in over 99% of cases. Because we clone your original data, the replacement module is ready to be installed and function immediately. In rare instances, as noted above, a simple relearn procedure for the airbag or brake pedal sensor may be required using a pro-level scan tool.
How long does the entire process take?
Once we receive your original module, our service is typically completed within 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with a tracking number as soon as your programmed module is shipped back to you.
Do I need to send my keys with the module?
No, you do not need to send your keys. All the necessary security and key information is stored within the BCM itself. We transfer this data during the cloning process, so your existing keys will work seamlessly with the replacement module.
Do I have to return my old module for a core charge?
No, there is no core charge. We require your original module to perform the programming service, but you do not need to worry about core returns or fees.