Restore Full Functionality to Your Vehicle’s Electronics
Is your Chevrolet Volt or other GM vehicle plagued by strange and frustrating electrical issues? The Body Control Module, or BCM, is the central command center for your car’s body electronics, managing everything from power windows and locks to interior lighting and the security system. When it begins to fail, it can create a cascade of problems that are often difficult to diagnose. This listing is for a direct replacement, professionally programmed 2014-2015 Volt BCM that eliminates the guesswork and the need for expensive dealership visits.
Replacing a BCM isn’t as simple as swapping the part. A new module from the manufacturer is a blank slate and must be programmed with your vehicle’s specific VIN, security information, and option content. Our professional cloning service makes this process simple. You send us your original BCM, and we transfer all of its critical data to a fully tested replacement unit. The module you receive back will be 100% plug-and-play, restoring your vehicle to its original factory condition without any additional programming required.
Is Your Body Control Module Failing?
A faulty BCM can manifest in numerous ways, often intermittently. If you’re experiencing any of the following symptoms, a failing BCM is a likely culprit:
- ✔ Power windows, door locks, or mirrors working erratically or not at all.
- ✔ Interior dome lights, headlights, or taillights staying on, flickering, or failing to turn on.
- ✔ The vehicle’s anti-theft or security system engaging randomly, causing a no-start condition.
- ✔ Instrument cluster gauges behaving erratically, or random warning lights appearing on the dash.
- ✔ Key fobs are no longer recognized by the vehicle, or the remote start fails.
- ✔ Diagnostic trouble codes (DTCs) pointing to a loss of communication with the BCM.
From the Diagnostic Bay
We recently had a 2015 Chevy Malibu come into the shop with a list of bizarre symptoms. The radio would shut off randomly, the driver’s side window wouldn’t roll down, and the security light would flash intermittently. The owner had already replaced the battery and checked every fuse he could find. After connecting our diagnostic scanner, we found multiple communication loss codes with the BCM. A new module would have required a tow to the dealer and several hours of costly programming. Instead, we used this exact cloning service. We shipped the original module out, received the programmed replacement two days later, and installed it in under 30 minutes. All the electrical gremlins were gone. This service saved the customer hundreds of dollars and significant vehicle downtime.
Our Simple, Hassle-Free Programming Service
We’ve designed our service to be as straightforward as possible. Here’s how it works:
- Place Your Order: Complete your purchase through our secure checkout.
- Receive Instructions: We will contact you via the information on your order with detailed instructions on how to ship your original BCM to our facility.
- Ship Your Module: Carefully package your original BCM and send it to us.
- The Cloning Process: Once we receive your module, our expert technicians will perform a full data transfer to a replacement unit. This includes the VIN, mileage, key data, and all vehicle-specific options.
- Receive Your Solution: We ship the fully programmed, plug-and-play replacement module back to you. Once it arrives, simply install it, and you’re ready to go!
Post-Installation Procedures for Your 2014-2015 Volt BCM
While our module is designed to be plug-and-play, certain vehicle systems may require a simple relearn procedure after the BCM is reconnected. These are standard procedures and can often be performed with a high-quality bidirectional scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, the ‘Setup SDM Primary Key in BCM’ procedure is necessary. This syncs the new BCM with the airbag system’s Sensing and Diagnostic Module (SDM) to ensure safety system integrity.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be required. This ensures the brake lights function correctly and that the traction and stability control systems receive accurate data from the sensor.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Frequently Asked Questions
What exactly is a BCM cloning service?
Cloning is the process of reading the essential, vehicle-specific data from your original Body Control Module and writing it onto a replacement module. This makes the replacement unit an exact digital copy of the original, allowing it to work in your vehicle without any further dealer programming.
Why is this better than buying a new BCM from a dealer?
Our service saves you significant time and money. You avoid the high cost of a new module, expensive dealership labor rates for programming, and the inconvenience of having your vehicle towed or left at the service center. Our solution is plug-and-play.
How long does the entire process take?
Once we receive your original module, our programming service is typically completed within 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with tracking information for the return shipment.
What if my original BCM is too damaged to be read?
In most cases, even with significant internal faults, we can still retrieve the necessary data. If for some reason your module’s data is completely unrecoverable, we will contact you to discuss alternative options.
Do I need to perform any programming after installation?
No, the module itself is fully programmed. However, as mentioned above, some related systems like the airbag or brake pedal position sensor may require a simple ‘relearn’ procedure to sync with the new BCM. This is not the same as the complex programming required for a new module.
Which vehicles will this part number 13590173 fit?
This BCM is compatible with a wide range of 2014-2017 GM vehicles, including the Chevy Volt, Malibu, Camaro, Spark EV, Cadillac ELR, SRX, and Buick LaCrosse and Regal. Please verify your part number and check the detailed fitment list on this page.