Is Your Camaro Acting Possessed? Get a Reliable Fix.
If you’re dealing with bizarre electrical issues in your 2014-2015 Chevrolet Camaro—like power windows with a mind of their own, flickering interior lights, a temperamental security system, or intermittent no-start conditions—the culprit is often the Body Control Module (BCM). As the central command center for your car’s body electronics, a failing BCM can cause a cascade of frustrating and hard-to-diagnose problems. A trip to the dealership often means a hefty bill for a new module plus expensive programming fees.
We offer a smarter, more affordable solution. This is a fully tested, replacement Body Control Module that comes ready for installation. How? Through our professional cloning service. You simply send us your original BCM, and we transfer all the critical vehicle-specific data (like VIN, mileage, and key information) to this replacement unit. The result is a true plug-and-play module. You get to skip the dealership, avoid programming hassles, and get your Camaro back to normal fast.
From the Diagnostic Bay: The Case of the Phantom Gremlins
I once had a 2015 Camaro convertible in my shop that was driving the owner crazy. The radio would randomly shut off, the passenger window wouldn’t go down, and occasionally, the anti-theft light would flash, preventing it from starting. He’d already spent hundreds at another shop that couldn’t find the issue. After hooking up my scan tool, I noticed several communication loss codes (U-codes) pointing to the BCM. Instead of just replacing it and sending him to the dealer for programming, we used a cloned unit. By transferring the data from his original, faulty BCM, the replacement unit was a perfect match. We installed it in under 30 minutes, and every single one of his electrical gremlins vanished. It’s a prime example of how this service saves customers time, money, and a massive headache.
Common Signs of a Failing BCM
If you’re experiencing any of the following, your Body Control Module is the likely cause. A failing BCM can sometimes trigger communication error codes like U0140, U0155, or other related faults.
- âś” Power windows, locks, or mirrors operating erratically or not at all.
- âś” Interior or exterior lights flickering, staying on, or not turning on.
- âś” The vehicle’s security system engaging randomly, causing a no-start condition.
- âś” Horn honking unexpectedly or not working when pressed.
- âś” Inaccurate gauge readings or warning lights on the instrument cluster.
- âś” Remote keyless entry (fob) failing to lock or unlock the doors.
A Straightforward Guide to Installation
Our cloning service makes the final installation simple. Here’s how the process works from start to finish:
- Step 1: Purchase and Ship. After you place your order, we will contact you with instructions for shipping your original BCM to our facility. Please ensure your contact information is correct at checkout.
- Step 2: We Handle the Programming. Once we receive your module, our technicians will professionally transfer all necessary data to the replacement 2014-2015 Camaro BCM. We then ship the plug-and-play unit back to you.
- Step 3: Disconnect the Battery. Before you begin, always disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Step 4: Locate and Remove the Original BCM. On the 2014-2015 Camaro, the BCM is typically located behind the right-hand side of the dashboard. Carefully disconnect the wiring harnesses and remove the mounting hardware to take out the old module.
- Step 5: Install the Replacement Module. Mount the new BCM in the same location, reconnect the wiring harnesses securely, and then reconnect your vehicle’s battery.
- Step 6: Verify Functionality. Start the car and test all body functions—windows, locks, lights, wipers, etc.—to confirm the repair was successful.
Important Post-Installation Notes
In some cases, additional synchronization procedures may be required after installing your new BCM:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure correct brake light and traction control operation.
Disclaimer: Always consult a factory service manual or a qualified technician if you are unsure about any part of the installation process.
Verified Vehicle Compatibility
This module is a direct replacement for part number 13594564 and is interchangeable with the following part numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, and 13593776. It is guaranteed to fit the following vehicles:
- 2014-2015 Chevrolet Camaro (Body Control, RH dash)
- 2014-2015 Buick LaCrosse (Body Control, LH kick panel)
- 2016 Buick LaCrosse (Body Control, LH kick panel, ID 13580698 or 13594564)
- 2014-2017 Buick Regal (Body Control, LH dash)
- 2014-2015 Chevrolet Malibu (Body Control, LH kick panel)
- 2016 Chevrolet Malibu (Body Control, VIN 1, Limited, LH kick panel)
- 2014-2015 Chevrolet Volt (Body Control, RH engine compartment)
- 2014-2016 Cadillac ELR (Body Control, RH cowl)
- 2014-2016 Cadillac SRX (Body Control, LH dash)
- 2014-2016 Chevrolet Spark EV (Body Control, left lower a-pillar, electric model)
Frequently Asked Questions
What is a “cloning” service?
Cloning is the process where we transfer the essential vehicle-specific software and security data from your original BCM to the replacement unit. This makes the new module a perfect electronic match for your car, eliminating the need for expensive dealership programming.
Do I need to do any programming myself?
No. Our service handles all the programming. The 2014-2015 Camaro BCM you receive will be completely plug-and-play. Just install it and you’re ready to go.
How long does the service take?
We typically program and ship your replacement module within 24-48 hours of receiving your original BCM. We will send you tracking information as soon as it ships.
Is this part difficult to install for a DIYer?
For someone with basic mechanical skills, the physical swap is straightforward. The BCM is usually accessible behind the dash. The main benefit of our service is removing the complex and costly programming step, making it a very DIY-friendly repair.
Do I need to send my keys with the module?
No, you do not need to send your keys. All the necessary security information is stored within the BCM itself, which is what we transfer during the cloning process.
Is there a core charge?
No, there is no core charge for this item. You can keep your original module after sending it to us for the data transfer service.