Restore Your Camaro’s Electrical System with a Perfectly Matched BCM
Is your 2014 or 2015 Camaro suffering from bizarre electrical problems? Flickering lights, malfunctioning power windows, or random warning messages on the dash are classic signs of a failing Body Control Module (BCM). As the central nervous system for your car’s body electronics, a faulty BCM can cause a cascade of frustrating issues. Dealerships often charge a fortune for a new module plus mandatory programming fees. We offer a simpler, more affordable solution: a fully programmed 2014-2015 Camaro BCM that’s ready for installation right out of the box.
How Our Simple Cloning Service Works
Forget about towing your car to the dealer or wrestling with complex diagnostic tools. Our process is designed to be straightforward. After you place your order, we’ll provide instructions for shipping your original BCM to our facility. Once it arrives, our expert technicians will transfer all the critical vehicle-specific data—including VIN, mileage, and key information—to this replacement module. We then ship the ready-to-install BCM back to you. This cloning service ensures seamless integration with your Camaro’s existing systems, making the repair as simple as swapping the part.
A Technician’s Notebook: The Case of the Haunted Camaro
A customer brought in a ’15 Camaro Convertible with a list of complaints that sounded like a ghost was in the machine. The dome lights would stay on, the radio would randomly shut off, and worst of all, the car would sometimes refuse to start, leaving him stranded. He’d already replaced the battery to no avail. We scanned it and found a slew of U-codes (U0140, U0155) pointing to a communication breakdown. The culprit? The BCM. Instead of a costly new unit, we used our cloning service. By transferring his original data to a quality replacement, we had him back on the road the next day with all electrical functions restored. It’s a common scenario I’ve seen dozens of times with these platforms.
Is Your Camaro Showing These Symptoms?
A failing BCM can manifest in many ways. If you’re experiencing any of the following, your Body Control Module is the likely cause:
- ✔ Power windows, locks, or mirrors operating erratically or not at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The security system acting up, causing no-start conditions.
- ✔ Inaccurate gauge readings or a dead instrument cluster.
- ✔ Warning lights for the airbag, ABS, or traction control systems.
- ✔ Communication error codes, such as U0140, indicating loss of communication with the BCM.
Your Straightforward Installation Guide
Installing your programmed 2014-2015 Camaro BCM is a manageable task for a confident DIYer. The BCM is typically located on the right-hand (passenger) side of the dash.
- Step 1: Disconnect Power. Always begin by disconnecting the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Step 2: Locate the BCM. On the 2014-2015 Camaro, you will find the BCM behind the passenger side of the dashboard. Access may require removing the glove box or a lower dash panel.
- Step 3: Disconnect and Remove. Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt or unclip the module from its mounting bracket.
- Step 4: Install the New Module. Mount your new, pre-programmed BCM in the same location and reconnect all the electrical connectors securely.
- Step 5: Reconnect and Test. Reconnect the negative battery terminal. Start the car and test all body functions—lights, windows, locks, etc.—to confirm the repair is successful.
Important Post-Installation Information
While our cloning service handles the primary programming, some vehicle systems may require a quick sync-up after installation:
- Airbag System Sync: If your airbag warning light is illuminated after installation, a simple “Setup SDM Primary Key in BCM” procedure is needed. This requires a professional scan tool to sync the BCM with the airbag module.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn might be necessary to ensure the brake lights and traction control system function correctly.
- No Core Required: You do not need to send your old part back to us after the repair. There is no core charge.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a professional technician if you are unsure about any step.
Verified Vehicle Compatibility
This BCM is a direct replacement for part number 13591300 and is interchangeable with the following part numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13592376, 13593775, 13593776, and 13594564. It fits the following models:
- 2014-2015 Chevrolet Camaro (Body Control (BCM); RH dash)
- 2014-2015 Buick LaCrosse (Body Control (BCM); LH kick panel)
- 2016 Buick LaCrosse (Body Control (BCM); ID 13580698 or 13594564)
- 2014-2017 Buick Regal (Body Control (BCM); LH dash)
- 2014-2015 Chevrolet Malibu (Body Control (BCM); LH kick panel)
- 2016 Chevrolet Malibu (Body Control (BCM); VIN 1, Limited)
- 2014-2015 Chevrolet Volt (Body Control (BCM); RH engine compartment)
- 2014-2016 Cadillac ELR (Body Control (BCM); RH cowl)
- 2014-2016 Cadillac SRX (Body Control (BCM); LH dash)
- 2014-2016 Chevrolet Spark (Body Control (BCM); electric model EV)
Do I need to get this BCM programmed by a dealer?
Do I need to get this BCM programmed by a dealer?
No. The price of this module includes our expert cloning service. We transfer the data from your original BCM to this replacement unit, so it arrives at your door ready to install without any additional programming required.
What do I need to send you?
You only need to ship your original Body Control Module to us. After you complete your purchase, we will contact you with detailed shipping instructions. Please ensure your contact information is accurate at checkout.
How long does the service take?
We typically program and ship your replacement BCM within 1-2 business days of receiving your original module. We will send you a tracking number as soon as it’s on its way back to you.
Is this a guaranteed fix for my 2014-2015 Camaro BCM?
This module will resolve issues directly caused by a faulty BCM. If your vehicle has been properly diagnosed with a failed BCM, this service provides a reliable and permanent solution. It is essential to ensure the BCM is the true source of the problem before ordering.
Do I need to return my old BCM after installation?
No, there is no core charge or requirement to return your old module after the service is complete. You can keep it.