Restore Your Camaro’s Brain and End Electrical Frustration
Are you chasing down bizarre electrical gremlins in your 2014-2015 Camaro? One minute the power windows work, the next they don’t. Maybe your interior lights are flickering, the security system is acting up, or you’re seeing a cascade of warning lights on the dash. Before you start tearing apart wiring harnesses, the culprit is often the Body Control Module (BCM). As the central command center for your car’s body electronics, a failing BCM can create chaos. This isn’t just an inconvenience; it can affect safety systems. We offer a straightforward, reliable solution: a replacement BCM, pre-programmed with your car’s exact data, making the repair process as simple as possible.
From the Diagnostic Bay: The Case of the Haunted Camaro
I remember a 2015 Camaro convertible that rolled into my shop with a list of complaints that seemed unrelated. The radio would randomly shut off, the driver’s side window would sometimes refuse to go down, and the remote key fob worked intermittently. The owner had already replaced the battery and checked fuses. After hooking up my pro-level scanner, I saw multiple ‘U’ codes, indicating a loss of communication between various modules. In my 20+ years of experience, this pattern almost always points to a single source of failure: the BCM. Instead of a costly new module and hours of programming at the dealer, we used a cloned BCM. The customer mailed in his original, we transferred the data, and sent him the ready-to-install replacement. He swapped it in his own garage in under an hour, and every single phantom issue was gone. It’s a testament to how a targeted, pre-programmed part can save hundreds in diagnostics and labor.
Common Signs of a Failing GM BCM
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
- ✔ The security system preventing the car from starting or the alarm going off randomly.
- ✔ Instrument cluster warning lights (like ABS, Airbag, or Traction Control) illuminating without a clear cause.
- ✔ Diagnostic trouble codes (DTCs) related to communication errors, often starting with ‘U’ (e.g., U0100, U0140).
- ✔ Malfunctions with the radio, climate control, or other interior accessories.
Your Straightforward BCM Installation Guide
Installing your pre-programmed 2014-2015 Camaro BCM is a manageable job for a DIY enthusiast. The key is our cloning service, which handles all the complex software work beforehand. Follow these general steps for a successful installation.
- Step 1: Prioritize Safety. Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down before beginning work.
- Step 2: Locate the BCM. In the 2014-2015 Camaro, the Body Control Module is typically located behind the right-hand (passenger side) of the dashboard. Access may require removing the glove box or a lower dash panel.
- Step 3: Disconnect the Old Module. Carefully unplug all electrical connectors from the original BCM. These connectors have locking tabs that must be depressed to be removed. Do not force them.
- Step 4: Swap the Modules. Remove the mounting bolts or clips holding the old BCM in place and take it out. Install the replacement module you received from us in the same location.
- Step 5: Reconnect and Reassemble. Securely plug all electrical connectors into the new BCM. You should hear a click as they lock into place. Reassemble any dash panels you removed.
- Step 6: Final Checks. Reconnect the negative battery terminal. Turn the ignition to the ‘On’ position and test all functions controlled by the BCM: lights, windows, locks, radio, etc. Please see the post-installation notes below.
Important Post-Installation Procedures
While our service makes this a plug-and-play repair, some vehicle systems may require recalibration after the BCM is replaced. This is normal. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, it means the new BCM needs to be synced with the airbag’s Sensing and Diagnostic Module (SDM). A professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure to clear the light.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be necessary. This ensures your brake lights and traction control system function correctly. This also requires a capable diagnostic tool.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Vehicle Compatibility
This BCM is a direct-fit, programmed solution for a range of GM vehicles. Verify your model and options below. This module is compatible with part numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564.
- 2014-2015 Chevrolet Camaro (Body Control, RH dash)
- 2014-2015 Buick LaCrosse (Body Control, LH kick panel)
- 2016 Buick LaCrosse (Body Control, LH kick panel, ID 13580698 or 13594564)
- 2014-2017 Buick Regal (Body Control, LH dash)
- 2014-2015 Chevrolet Malibu (Body Control, LH kick panel)
- 2016 Chevrolet Malibu Limited (Body Control, VIN 1, LH kick panel)
- 2014-2015 Chevrolet Volt (Body Control, RH engine compartment)
- 2014-2016 Cadillac ELR (Body Control, RH cowl / Communication, RH engine compartment)
- 2014-2016 Cadillac SRX (Body Control, LH dash)
- 2014-2016 Chevrolet Spark EV (Body Control, left lower a-pillar, electric model)
How does this BCM programming service work?
How does this BCM programming service work?
It’s simple. After you place your order, we will contact you with instructions to ship your original BCM to us. Once we receive it, our technicians will transfer the vital programming and security data to the replacement module. We then ship the ready-to-install BCM back to you. This process ensures 100% compatibility with your vehicle’s specific options and security system.
Is this a true plug-and-play solution?
Yes, for the vast majority of functions. Because we clone your original data, the module will work with your existing keys and vehicle configuration upon installation, saving you a trip to the dealer for programming. In some cases, as noted above, minor post-install relearn procedures for systems like the airbags or brake sensor may be needed with a pro-level scan tool.
Do I have to pay a core charge?
No. There is no core charge for this part. We only need your original module to perform the data transfer service. You can keep your original module after the service is complete.
What happens if my original BCM is completely dead or not communicating?
Even if a BCM is failing, we can often extract the necessary data from the memory chip. Please contact us before ordering if your module is severely damaged by water or fire, as that can affect our ability to recover the data.
Will this fix my specific electrical problem?
This programmed 2014-2015 Camaro BCM is the definitive solution for failures within the module itself. If your vehicle exhibits the symptoms listed above, such as multiple unrelated electrical faults or communication codes, a faulty BCM is the most likely cause. Proper diagnosis is always recommended to rule out other issues like wiring or grounds.