Restore Your Camaro’s Electrical System the Smart Way
Is your 2014-2015 Camaro suffering from bizarre electrical issues? Flickering lights, malfunctioning power windows, a security system that acts up, or even a no-start condition can often be traced back to a single component: the Body Control Module (BCM). As the central nervous system for your car’s body electronics, a failing BCM can cause a cascade of frustrating problems. Dealerships will quote you a fortune for a new module plus mandatory programming fees. We offer a simpler, more affordable, and effective solution.
This is a direct-fit replacement Body Control Module for your vehicle. The key to our service is our professional programming. You simply send us your original BCM, and we transfer all its vital data—including VIN, mileage, and key programming—to this replacement unit. The result? You receive a module that is 100% plug-and-play. No trips to the dealer, no expensive scan tools, and no compatibility headaches. It’s the definitive fix for a faulty 2014-2015 Camaro BCM.
A Technician’s Notebook
I recently had a ’15 Camaro Convertible in the shop that was a real head-scratcher for the owner. The radio would randomly turn off, the driver’s side window wouldn’t drop for the door to close properly, and the remote start was completely dead. The owner had already replaced the battery, thinking it was a simple voltage issue. After connecting my scanner, I saw a flurry of communication error codes (U-codes) pointing to the BCM. Instead of a costly new module from the dealer, we used this exact cloning service. Once the programmed module arrived, the swap took less than 30 minutes. Every single issue was resolved instantly. It’s a testament to how crucial a perfectly functioning BCM is for these modern vehicles.
Telltale Signs of BCM Failure in Your Camaro
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, your Body Control Module is the likely culprit. Keep an eye out for associated Diagnostic Trouble Codes (DTCs) like U0140, U0155, or various B-series codes.
- ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
- ✔ Interior or exterior lights behaving erratically (flickering, staying on, or not turning on).
- ✔ The anti-theft or security system preventing the car from starting.
- ✔ Remote key fob functions failing to work.
- ✔ Unexplained battery drain when the vehicle is off.
- ✔ Warning lights on the dashboard, such as for the airbag or traction control system.
Your Straightforward Installation Roadmap
Our cloning service makes the physical installation simple. After you receive your programmed module from us, follow these general steps. The BCM in the 2014-2015 Camaro is typically located behind the right-hand side of the dashboard.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Access the Module: Carefully remove the trim panels on the right side of the dash/glove box area to gain access to the BCM.
- Disconnect and Remove: Unplug the electrical connectors from the old BCM. They have locking tabs, so be gentle. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New BCM: Mount your new, pre-programmed module in the same location and securely reconnect all electrical connectors.
- Reconnect Power: Reattach the negative battery terminal.
- Test All Functions: Start the vehicle and test all body electronics: windows, locks, lights, radio, and key fob to confirm the repair is successful.
Important Post-Installation Checks
While our programming makes this a plug-and-play part, some vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following potential procedures:
- Airbag System Sync: If your airbag warning light is illuminated after installation, a simple ‘Setup SDM Primary Key in BCM’ procedure is needed. This requires a professional-grade scan tool to sync the systems and clear the light.
- Brake Pedal Position Relearn: On some models, a recalibration of the brake pedal position sensor might be necessary to ensure brake lights and stability control function correctly.
Disclaimer: Always consult a factory service manual or a qualified professional if you are unsure about any step. These procedures can vary slightly based on your specific vehicle configuration.
Verified to Fit These GM Models
This module, part number 13593776, is a direct replacement for several original part numbers and fits a wide range of General Motors vehicles. Please verify your part number is on this list for guaranteed compatibility.
- Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
- Chevrolet Camaro: 2014 (Convertible, RH dash), 2015 (RH dash)
- Chevrolet Malibu: 2014-2015 (LH kick panel), 2016 (Limited, LH kick panel)
- Chevrolet Volt: 2014-2015 (RH engine compartment)
- Chevrolet Spark EV: 2014-2016 (Left lower A-pillar)
- Buick LaCrosse: 2014-2016 (LH kick panel)
- Buick Regal: 2014-2017 (LH dash)
- Cadillac ELR: 2014-2016 (RH cowl / RH engine compartment)
- Cadillac SRX: 2014-2016 (LH dash)
How does the programming service work?
After you purchase, we will contact you with instructions to ship your original BCM to us. Once we receive it, we perform a full data transfer to the replacement module. We then ship the ready-to-install BCM back to you, typically within 1-2 business days. Tracking will be provided.
What if my original BCM is completely dead or missing?
In most cases, we need the original module to extract the data. If your module is missing, water damaged, or completely non-communicative, please contact us before ordering. We may have alternative solutions depending on the situation.
Is this a guaranteed fix for my car’s problems?
This service corrects issues caused by a faulty BCM. While the symptoms listed are common for BCM failure, it’s crucial to have your vehicle properly diagnosed by a professional to rule out other potential causes, such as wiring or sensor faults. A proper diagnosis ensures you’re buying the right part for the job.
Will I need to do anything after installing it?
Our service makes the module plug-and-play, so no initial programming is needed. However, as noted, some vehicles may require a simple airbag system sync or brake pedal position relearn if specific warning lights appear after installation. These are minor procedures that can be done with a high-end scan tool.
Do I need to return my old BCM as a core?
No. There is no core charge for this item. Once we have performed the programming service, we will ship your original module back to you along with the newly programmed replacement. You can keep it or dispose of it as you see fit.