Restore Your Camaro’s Electrical System with a Hassle-Free Solution
If you’re dealing with baffling electrical issues in your 2014-2015 Chevrolet Camaro—like power windows that won’t cooperate, dashboard lights flickering randomly, or a security system with a mind of its own—the Body Control Module (BCM) is the likely culprit. As the central nervous system for your car’s body electronics, a failing BCM can cause widespread and frustrating problems. The dealership solution often involves a brand-new module, expensive programming fees, and significant vehicle downtime. We offer a smarter, more efficient alternative.
Our professional cloning service provides you with a fully programmed, plug-and-play replacement BCM. Here’s how it works: you purchase this service and ship your original BCM to our facility. Our expert technicians will then meticulously transfer all critical data—including your vehicle’s VIN, security information, and specific options—to a replacement module. We then ship the ready-to-install unit back to you. This process completely eliminates the need for any dealership programming, saving you time, money, and headaches.
Common Signs of a Failing GM BCM
- ✔ Intermittent or non-functional power windows, door locks, or interior lights.
- ✔ The security or anti-theft light stays on, preventing the car from starting.
- ✔ Dashboard warning lights illuminate for no reason.
- ✔ Inconsistent operation of the radio, climate control, or other accessories.
- ✔ Diagnostic trouble codes (DTCs) related to communication errors, such as U0140, U0155, or other U-series codes.
- ✔ Horn honking unexpectedly or not working at all.
A Technician’s Notebook: The Malibu with a Ghost
A few months back, a 2015 Malibu came into the shop with a list of symptoms that had the owner completely stumped. The car would intermittently fail to start, the radio would shut off randomly, and the power locks would cycle while driving. The owner had already replaced the battery and checked the main fuses. After hooking up the scanner, I saw a slew of communication loss codes with various modules. This pattern almost always points to the network’s central hub: the BCM. Instead of quoting him over $800 for a new module and dealer programming, we recommended our cloning service. He sent us his module, we cloned it, and he had the replacement back in a few days. He installed it himself in under 30 minutes. The ‘ghost’ was gone, and he saved hundreds of dollars. This is the exact service we offer you for your 2014-2015 Camaro BCM.
A Straightforward Guide to Installation
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- ✔ Locate the BCM: In the 2014-2015 Camaro, the Body Control Module is typically located behind the right-hand (passenger side) of the dashboard. Access may require removing the glove box or a lower trim panel.
- ✔ Carefully Disconnect: Unplug all electrical connectors from the module. They have locking tabs, so be gentle to avoid damage. Unbolt the module from its mounting bracket.
- ✔ Ship Your Original Module: After your purchase, we will provide you with shipping instructions. Please ensure your contact information is correct so we can coordinate the process smoothly.
- ✔ Install the Cloned BCM: Once you receive the programmed replacement from us, simply mount it in place and reconnect all the electrical connectors.
- ✔ Reconnect Power: Re-attach the negative battery terminal.
- ✔ Final System Checks: Start the vehicle and verify that all body functions (windows, locks, lights, etc.) are operating correctly. Note the post-installation procedures below.
Important Post-Installation Information
Because your vehicle’s data is cloned, most functions will work immediately. However, some security handshakes may need to be re-established. Please be aware of the following potential requirements:
- Airbag System Sync: If your airbag warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed. This requires a professional-grade scan tool to sync the airbag system with the new BCM and clear the light.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary. This ensures your brake lights and traction control system function as intended.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a qualified technician if you are unsure about any step.
Verified Compatibility Across GM Models
This BCM cloning service is compatible with part number 13590173 and other interchangeable numbers. It fits a wide range of vehicles. Please verify your part number and match it to our list:
- ✔ Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
- ✔ Chevrolet Camaro: 2014 (Convertible), 2015 (RH dash)
- ✔ Chevrolet Malibu: 2014-2015, 2016 (Limited, VIN 1)
- ✔ Chevrolet Spark EV: 2014-2016
- ✔ Chevrolet Volt: 2014-2015
- ✔ Buick LaCrosse: 2014-2016
- ✔ Buick Regal: 2014-2017
- ✔ Cadillac ELR: 2014-2016
- ✔ Cadillac SRX: 2014-2016
Frequently Asked Questions
What exactly is BCM cloning?
Cloning is the process of reading the essential software and vehicle-specific data (like VIN, mileage, and key codes) from your original BCM and writing it onto a replacement module. This makes the replacement an exact digital copy, allowing it to work in your car without any additional programming.
Why is this better than buying a used BCM from a junkyard?
A used BCM is programmed to a different vehicle. Installing it in your car will cause a mismatch, and the car likely won’t start or will have major functional errors. It would still require expensive dealership programming to work, defeating the purpose. Our service gives you a plug-and-play part.
Do I need to send my keys with the module?
No. Because we are cloning all the data from your original module, the replacement will already recognize your existing keys. This is one of the biggest benefits of our service.
How long does the cloning service take?
We typically program and ship your replacement module within 24-48 hours of receiving your original BCM. We will send you tracking information as soon as it ships.
Is there a core charge for my old module?
No, there is no core charge. We only need your original module to perform the data transfer. It will be returned to you along with the newly programmed replacement unit.