If you’re dealing with baffling electrical issues in your 2014-2015 Chevrolet Camaro, you’ve likely met the frustrating reality of a failing Body Control Module (BCM). As the central hub for your car’s body electronics, a faulty BCM can cause a cascade of problems that seem unrelated, from power windows not working to the car refusing to start. This isn’t just an inconvenience; it can sideline your vehicle completely. Dealerships often quote astronomical prices for a new module, followed by expensive programming fees. We offer a smarter, more affordable solution.
This is a comprehensive mail-in programming service for your 2014-2015 Camaro BCM. You simply send us your original, faulty module. We then transfer all the critical data—including your vehicle’s VIN, mileage, security information, and specific options—to a fully functional replacement unit. The module you receive back is a true plug-and-play component, completely synchronized to your Camaro. This process eliminates the need for a trip to the dealer and the use of expensive scan tools for setup, getting you back on the road with confidence.
Case Study: A Tricky Diagnosis
A customer brought in a 2015 Camaro convertible with a list of strange symptoms: the interior lights would flicker, the radio would randomly shut off, and the convertible top would only work intermittently. Initially, they suspected a bad battery or alternator, but both checked out fine. After scanning the vehicle, we found a slew of ‘U’ series communication codes, all pointing to a network issue. In my 20+ years of experience, this pattern almost always leads back to the BCM. The internal logic board was failing, causing it to broadcast corrupted data across the CAN bus network. By providing them with a cloned 2014-2015 Camaro BCM, we restored all functions perfectly without any additional programming. It’s a classic example of how a single module can create widespread electronic chaos.
Common Signs of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights staying on or not working at all.
- ✔ Instrument cluster gauges behaving erratically or going dark.
- ✔ Vehicle security system acting up, preventing the car from starting.
- ✔ No communication with the module when using a diagnostic scan tool (Common DTCs: U0140, B1000).
- ✔ Inconsistent operation of the radio, climate control, or other accessories.
Your Straightforward Mail-In Service Guide
- ✔ Step 1: Purchase and Prepare. After you place your order, we will contact you with detailed shipping instructions. Please ensure your contact information is correct at checkout.
- ✔ Step 2: Remove Your Module. For the 2014-2015 Camaro, the BCM is typically located behind the right-hand (passenger side) of the dashboard. Always disconnect the negative battery terminal before starting work.
- ✔ Step 3: Ship It To Us. Securely package your original BCM and ship it to the address we provide.
- ✔ Step 4: We Program Your Replacement. Once we receive your module, our technicians will meticulously transfer all necessary data to the replacement BCM. This process usually takes 1-2 business days.
- ✔ Step 5: Install and Drive. We ship the plug-and-play module back to you. Simply install it, reconnect your battery, and your Camaro’s electronics should be fully restored.
Important Post-Installation Notes
While our programming makes this a plug-and-play part, some vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following:
- Airbag System Sync: If your airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn might be necessary to ensure the brake lights and traction control system function correctly.
- No Core Charge: You are not required to return your original module to us after the service, as we use it for the initial data transfer.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any procedures.
Verified Vehicle Compatibility
This module is a direct replacement for part number 13589115 and is interchangeable with the following part numbers: 13580698, 13578458, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564. It is confirmed to fit the following vehicles:
- 2014-2015 Chevrolet Camaro (Body Control, RH dash)
- 2014-2015 Buick LaCrosse (Body Control, LH kick panel)
- 2016 Buick LaCrosse (Body Control, LH kick panel, ID 13580698 or 13594564)
- 2014-2017 Buick Regal (Body Control, LH dash)
- 2014-2015 Chevrolet Malibu (Body Control, LH kick panel)
- 2016 Chevrolet Malibu (Body Control, VIN 1, Limited, LH kick panel)
- 2014-2015 Chevrolet Volt (Body Control, RH engine compartment)
- 2014-2016 Cadillac ELR (Body Control, RH cowl)
- 2014-2016 Cadillac SRX (Body Control, LH dash)
- 2014-2016 Chevrolet Spark (Body Control, electric model EV, left lower a-pillar)
Frequently Asked Questions
How exactly does this mail-in service work?
After your purchase, you’ll receive instructions to ship your original BCM to us. We extract the unique data from your module and program it into a replacement unit. We then ship the ready-to-install BCM back to you.
Will I need to do any programming or visit a dealer after installation?
No. The module you receive is fully programmed and plug-and-play. Our service is designed to completely bypass the need for dealer programming.
What data is transferred from my old BCM?
We transfer all vehicle-specific information, including the VIN, immobilizer/security data for your keys, and software configurations for your car’s options (like sunroof, premium audio, etc.).
Do I need to send my keys or other modules with the BCM?
No, you only need to send the Body Control Module itself. Because we clone the security data, your existing keys will work seamlessly with the replacement module.
What is the typical turnaround time?
Once we receive your module, the programming and testing process typically takes 1-2 business days before it is shipped back to you.