Restore Full Functionality to Your Camaro with a Plug-and-Play BCM
Are you chasing electrical gremlins in your 2014 or 2015 Chevrolet Camaro? Flickering lights, unresponsive power windows, or a security system that has a mind of its own are classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your car’s body electronics, and when it starts to fail, it can cause a cascade of frustrating and unpredictable problems. Instead of facing a costly trip to the dealership for a new module and expensive programming fees, we offer a straightforward, reliable solution.
This is a comprehensive cloning service for your 2014-2015 Camaro BCM. Here’s how it works: After you place your order, you’ll ship your original BCM to our facility. We then extract the unique vehicle-specific data—including VIN, mileage, and key information—and flash it directly onto this replacement module. The result? We ship you back a BCM that is 100% plug-and-play. It arrives ready for installation, with no additional programming required. This process ensures seamless integration with your vehicle’s existing systems.
From the Diagnostic Bay: The Case of the Haunted Camaro
A few months back, a 2014 Camaro Convertible rolled into my shop with a list of bizarre symptoms. The owner said the radio would randomly turn off, the passenger window wouldn’t roll down, and the anti-theft light would flash intermittently, sometimes preventing the car from starting. He’d already replaced the battery and checked all the fuses. After connecting my scan tool, I found a slew of U-codes (communication errors) pointing to the BCM. Instead of a new dealer part, we opted for a cloned module. The owner shipped us his faulty BCM, we transferred the data, and sent the replacement back. He installed it in under an hour, and just like that, every single electrical issue was gone. It’s a textbook example of how a failing BCM can mimic a dozen other problems, and how a properly programmed replacement is the definitive fix.
Common Signs of a Failing BCM
If you’re experiencing any of the following, a faulty BCM is the likely culprit. A failing module can often set communication-related Diagnostic Trouble Codes (DTCs), such as U0140, U0155, or other U-series codes.
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ Interior dome lights, headlights, or taillights staying on or not turning on.
- ✔ The security system engaging randomly, causing a no-start condition.
- ✔ Horn honking unexpectedly or not working when pressed.
- ✔ Inaccurate gauge readings on the instrument cluster.
- ✔ Issues with the keyless entry and remote start systems.
A Straightforward Guide to Installation
Installing your pre-programmed BCM is a manageable job for a DIYer. On the 2014-2015 Camaro, the BCM is typically located behind the right-hand (passenger side) of the dashboard. Always confirm the location for your specific vehicle.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Access the Module: You will likely need to remove the glove box or a lower dash panel on the passenger side to gain access to the BCM.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt the module from its mounting bracket.
- Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely fasten it. Reconnect all the electrical connectors, ensuring they click into place.
- Reassemble and Reconnect: Reinstall any panels or the glove box that you removed. Reconnect the negative battery terminal.
- Final System Checks: Start the vehicle and test all body functions: windows, locks, lights, wipers, and radio to confirm proper operation.
Important Post-Installation Information
While our cloning service makes this a plug-and-play repair, some vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following potential procedures:
- Airbag System Sync: In some cases, the airbag warning light may illuminate after installation. This is not a fault with the BCM but a security protocol. A professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the modules and clear the light.
- Brake Pedal Position Relearn: To ensure accurate brake light operation and stability control performance, a Brake Pedal Position (BPP) sensor relearn procedure may be necessary.
- No Core Charge: You can keep your original module after sending it in for data cloning. There is no core charge or need to return it.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a qualified technician if you are unsure about any step.
Verified Vehicle Compatibility
This module is a direct-fit replacement for units with part number 13580698 and is interchangeable with the following part numbers: 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564. It is confirmed to fit the following vehicles:
- 2014-2015 Chevrolet Camaro (Body Control, RH dash)
- 2014-2015 Buick LaCrosse (Body Control, LH kick panel)
- 2016 Buick LaCrosse (Body Control, LH kick panel, ID 13580698 or 13594564)
- 2014-2017 Buick Regal (Body Control, LH dash)
- 2014-2016 Cadillac ELR (Body Control, RH cowl / Communication, RH engine compartment)
- 2014-2016 Cadillac SRX (Body Control, LH dash)
- 2014-2015 Chevrolet Malibu (Body Control, LH kick panel)
- 2016 Chevrolet Malibu (Body Control, VIN 1, Limited, LH kick panel)
- 2014-2016 Chevrolet Spark (Body Control, EV model, left lower a-pillar)
- 2014-2015 Chevrolet Volt (Body Control, RH engine compartment)
Frequently Asked Questions
How does the cloning service work?
After you purchase, we will contact you with instructions to ship your original BCM to us. We then transfer its critical data to the replacement module and ship the plug-and-play unit back to you. This eliminates the need for dealer programming.
Do I need to take my car to the dealer after installing this?
No. Our cloning service makes this a true plug-and-play solution. In rare cases, a simple relearn procedure might be needed for the airbag or brake pedal sensor, which can be done by most independent shops.
What are the most common signs of a bad BCM in a Camaro?
The most common symptoms are erratic power windows and locks, interior or exterior lights not working correctly, security system faults causing a no-start, and random warning messages on the dash.
Where is the BCM located on my 2015 Camaro?
The Body Control Module on the 2014-2015 Camaro is located behind the dashboard on the right-hand (passenger) side of the vehicle.
What if my airbag light comes on after installation?
If the airbag light is on, it means the BCM and the airbag module (SDM) need to be electronically re-synced. A procedure called ‘Setup SDM Primary Key in BCM’ must be performed with a professional scan tool to resolve this.
Is there a core charge for my old part?
No, there is no core charge. We only need your original module to perform the data transfer. You can keep it after the service is complete.