Tired of Bizarre Electrical Problems in Your Camaro?
As a technician with over two decades of experience under the hood, I’ve seen it all. Your 2014-2015 Camaro starts acting possessed—the radio turns on by itself, the power windows have a mind of their own, the security light won’t turn off, or worse, you’re facing a no-start condition. These aren’t random glitches; they’re classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s electronics, and when it goes bad, it creates frustrating and unpredictable issues. Dealerships will quote you a fortune for a new module and the mandatory programming. We offer a smarter, simpler, and more affordable solution.
Case Study: A Tricky Diagnosis
A customer brought in a 2015 Camaro Convertible with a maddeningly intermittent no-start. The battery was good, the starter checked out, but every few days, it would just refuse to crank. After hours of chasing wires, we noticed the security light was flashing erratically during the no-start events. A scan tool showed a loss of communication with multiple modules (U-codes). This pointed directly to the BCM. Instead of a costly new unit and a complex programming headache at the dealer, we used our cloning service. We transferred the data from his faulty BCM to our replacement unit. He was back on the road the next day, problem solved, for a fraction of the dealership cost.
The Hassle-Free Solution: Our BCM Cloning Service
This isn’t just a part; it’s a complete, ready-to-install solution. We take all the complexity out of the repair. By sending us your original BCM, you allow us to perform a precise data transfer to this replacement module. We clone the essential vehicle-specific information—including VIN, mileage, and security keys. The result? You receive a 2014-2015 Camaro BCM that is truly plug-and-play. No expensive trips to the dealer, no special scan tools required for programming. Just install it and go.
How Our Simple Mail-In Service Works
- ✔ Purchase: Complete your order for this BCM. Ensure your contact information is accurate.
- ✔ We Contact You: Our team will reach out with clear, simple instructions for shipping your original BCM to our facility.
Is Your Camaro Showing These Symptoms?
- ✔ Erratic power windows, door locks, or interior/exterior lights.
- ✔ Horn honking randomly or not working at all.
- ✔ Security system light is on or flashing, preventing the engine from starting.
- ✔ Communication failure codes (U-codes) stored in the system.
- ✔ Wipers or radio operating intermittently without command.
- ✔ A/C and climate control functions are not responding correctly.
A Straightforward Guide to BCM Installation
- ✔ 1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait 10-15 minutes to ensure all systems are powered down.
- ✔ 2. Locate the BCM: On the 2014-2015 Camaro, the BCM is typically located behind the dashboard on the right-hand (passenger) side. You may need to remove the glove box or a lower dash panel for access.
- ✔ 3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- ✔ 4. Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors.
- ✔ 5. Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all body functions—windows, locks, lights, wipers, etc.—to confirm the repair.
Important Post-Installation Notes
While our goal is a 100% plug-and-play experience, some vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary for proper brake light and traction control operation.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Verified Vehicle Compatibility
This module is a direct replacement for part number 13578458 and is interchangeable with the following part numbers: 13580698, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, and 13594564.
It is confirmed to fit the following vehicles:
- ✔ 2014-2015 Chevrolet Camaro (Body Control, RH dash)
- ✔ 2014-2015 Buick LaCrosse (Body Control, LH kick panel)
- ✔ 2016 Buick LaCrosse (Body Control, LH kick panel, ID 13580698 or 13594564)
- ✔ 2014-2015 Chevrolet Malibu (Body Control, LH kick panel)
- ✔ 2016 Chevrolet Malibu (Body Control, VIN 1, Limited, LH kick panel)
- ✔ 2014-2015 Chevrolet Volt (Body Control, RH engine compartment)
- ✔ 2014-2016 Cadillac ELR (Body Control, RH cowl)
- ✔ 2014-2017 Buick Regal (Body Control, LH dash)
- ✔ 2014-2016 Cadillac SRX (Body Control, LH dash)
- ✔ 2014-2016 Chevrolet Spark (Body Control, electric model EV, left lower a-pillar)
Frequently Asked Questions
Do I need to get this programmed by a dealer?
No. The entire point of our service is to handle the programming for you. We clone the data from your original module, so the one you receive is ready to install right out of the box.
What exactly do I need to send you?
You only need to ship us your original Body Control Module. After you place your order, we will email you detailed shipping instructions and the address for our facility.
Is there a core charge?
No, there is no core charge for this item. We will ship your original module back to you along with the newly programmed replacement.
How long does the cloning process take?
We typically complete the programming and data transfer service within 1-2 business days of receiving your original module. We then ship it back to you promptly.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM has failed, we can still extract the necessary data. If we determine the data is completely unrecoverable, we will contact you to discuss options, which may include a full refund.