Is Your Chevrolet Volt Experiencing Strange Electrical Problems?
If your 2013 Chevy Volt or another compatible GM vehicle is suffering from erratic behavior like flickering lights, malfunctioning power windows, intermittent wipers, or security system faults, a failing Body Control Module (BCM) is often the culprit. The BCM is the central nervous system for your vehicle’s body electronics, managing a vast array of comfort, convenience, and security features. When it fails, it can create a cascade of frustrating and seemingly unrelated issues, making your car unreliable and difficult to operate.
Expert Pro Tip: Before condemning your BCM, always perform a full battery and charging system test. A weak battery or a failing alternator can cause low voltage conditions that mimic BCM failure. Also, check the main power and ground connections to the BCM for corrosion or looseness. A simple connection issue can save you hundreds of dollars in diagnostic time and parts.
The Simple, No-Dealer-Visit Solution: A Programmed 2013 Volt BCM
Replacing a BCM isn’t as simple as swapping the part. A new or used module from a junkyard must be programmed by a dealership with expensive, specialized tools to recognize your vehicle’s specific VIN and security information. This adds significant cost, time, and hassle to the repair. Our unique programming service eliminates this step entirely. We transfer the critical data from your original BCM directly onto a replacement unit. The result is a true plug-and-play module, ready for installation right out of the box.
Common Symptoms of a Failing BCM:
- ✔ Intermittent or non-functional interior/exterior lights
- ✔ Power windows, locks, or mirrors operating erratically
- ✔ Horn honking unexpectedly or not working at all
- ✔ Security system and keyless entry malfunctions
- ✔ Dashboard warning lights illuminating without cause
- ✔ Wipers turning on by themselves or not responding to controls
- ✔ Communication issues with other vehicle modules, leading to diagnostic trouble codes (DTCs)
How Our BCM Programming Service Works:
- ✔ Place Your Order: Complete your purchase for this BCM programming service.
- ✔ We’ll Contact You: Our team will reach out to you with clear, step-by-step instructions for shipping your original BCM to our facility. Please ensure your contact information is accurate.
- ✔ Ship Your Original Module: Carefully package and send us your original BCM.
- ✔ We Transfer The Data: Upon receipt, our expert technicians will professionally clone all necessary data (including VIN, mileage, and key programming) to the replacement module.
- ✔ Receive Your Plug-and-Play BCM: We ship the fully programmed replacement BCM back to you, typically within 24-48 hours of receiving your original. You’ll receive tracking information as soon as it ships.
Guaranteed Compatibility
This service is a direct solution for a wide range of GM vehicles. This module is compatible with the following part numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, and 13583451. It fits models such as the LaCrosse, Volt, SRX, Terrain, Equinox, Camaro, Cruze, Orlando, and Regal from approximately 2011-2013. Please verify your part number to ensure a perfect match.
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, some vehicle systems may require a simple recalibration after the new BCM is installed. These procedures are straightforward for any qualified technician with a professional scan tool.
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the airbag system with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Frequently Asked Questions
What is a Body Control Module (BCM)?
The BCM is a computer in your car that controls and monitors various electronic accessories. It manages functions like power windows, locks, lights, wipers, the security system, and more, ensuring they all work together correctly.
Why is this programming service better than buying a used BCM?
A used BCM from another vehicle contains the wrong VIN and security data. It will not work in your car without being reprogrammed by a dealer, which is costly. Our service clones your car’s original data, making the replacement module a true plug-and-play solution, saving you time and money.
How long does the entire process take?
Once we receive your original BCM, our technicians typically complete the programming and ship your replacement module within 24-48 business hours. The total time depends on shipping transit times to and from our facility.
Is this a guaranteed fix for my car’s electrical problems?
This service corrects issues directly caused by a faulty BCM. While the symptoms listed are common indicators of BCM failure, we always recommend a proper diagnosis by a qualified mechanic to confirm the BCM is the root cause before ordering.
Do I need to send my keys with the module?
No, you do not need to send your keys. We transfer the key data directly from your original module, so your existing keys will work seamlessly with the programmed replacement BCM upon installation.