Restore Your Vehicle’s Functionality and End Electrical Headaches
Are you dealing with baffling electrical issues in your Chevrolet Volt or other GM vehicle? Flickering lights, malfunctioning windows, erratic dashboard warnings, or even a no-start condition can often be traced back to a single, central component: the Body Control Module (BCM). As the electronic nerve center for your vehicle’s comfort and convenience features, a failing BCM can create a cascade of frustrating and unpredictable problems. This isn’t just an inconvenience; it can affect vehicle safety and security. Instead of facing a costly trip to the dealership for a new module and expensive programming fees, we offer a streamlined, reliable solution.
This is a professionally prepared Body Control Module that is delivered to you ready for installation. Our service hinges on a precise cloning process. You simply send us your vehicle’s original BCM, and we transfer all its critical data—including the VIN, security information, and specific options—to this replacement unit. The result is a true plug-and-play module. By perfectly replicating your original data, we eliminate the need for any additional programming or key relearning procedures typically required by dealerships. This service is the most efficient and cost-effective way to get your car back to 100% functionality.
A Technician’s Notebook: The Case of the Confused Cruze
I had a 2014 Chevy Cruze come into the bay that was driving the owner crazy. The horn would honk randomly, the interior lights would stay on, and the power locks worked intermittently. The owner had already replaced the battery and checked all the fuses. After connecting my scan tool, I saw a slew of U-codes (Communication Errors), all pointing to a network problem originating from the BCM. Instead of a new module and a complex SPS programming session, we opted for a cloned BCM. We sent the original module out, got the cloned unit back in two days, and installed it in 15 minutes. All the bizarre electrical gremlins vanished instantly. The customer saved hundreds of dollars and countless hours of dealership hassle. This is the power of a properly cloned 2013 Volt BCM and its compatible counterparts.
Common Signs of a Failing BCM in Your GM Vehicle
- ✔ Power windows, door locks, or mirrors operate erratically or not at all.
- ✔ The security system acts up, causing alarm issues or preventing the engine from starting (anti-theft light).
- ✔ Interior or exterior lights flicker, stay on, or fail to turn on.
- ✔ The radio or infotainment system behaves unpredictably.
- ✔ You see communication-related Diagnostic Trouble Codes (DTCs) such as U0140, U0155, or other U-series codes.
- ✔ The instrument cluster displays incorrect information or warning lights for various systems.
A Straightforward Guide to Installation
- ✔ Cloning Process: Once we receive your module, our technicians will perform a full data transfer to the replacement unit, typically within one business day.
- ✔ Locate and Replace: Locate the old BCM (position varies by model, see fitment list). Carefully disconnect the wiring harnesses and remove the module. Install the new module, reconnect the harnesses, and then reconnect the battery.
- ✔ Post-Installation Checks: Start the vehicle and test all body functions (lights, locks, windows). In some cases, as noted below, minor relearn procedures may be necessary.
Important Post-Installation Notes
While our cloning service makes this a plug-and-play repair, certain vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the BCM and resolves the light. This is only required if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure flawless operation of the brake lights and traction control system.
Disclaimer: Always consult a factory service manual or a qualified professional if you are unsure about any step. No core charge is required; you can keep your original module.
Verified Fitment for These GM Models
This module is a direct fit for units bearing part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, or 13589325. It is compatible with the following vehicles and options:
- Chevrolet Cruze: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited) – Located at LH kick panel
- Chevrolet Equinox: 2013-2017 – Located at LH side of dash
- Chevrolet Malibu: 2013 – Located at LH kick panel
- Chevrolet Orlando: 2013-2014 – Located below center console
- Chevrolet Spark: 2014-2015 (Gasoline) – Located at left lower A-pillar
- Chevrolet Trax: 2013-2014 – Located at LH side of dash
- Chevrolet Volt: 2013 – Located in RH engine compartment (ID 13580697 or 13586273)
- Buick Encore: 2013-2014 – Located at LH side of dash
- Buick Regal: 2013 – Located at LH dash
- Buick Verano: 2013-2017 – Located below center of dash
- Cadillac SRX: 2013 – Located at LH dash
- GMC Terrain: 2013-2017 – Located at LH side of dash
Frequently Asked Questions
How does the cloning service work after I order?
After your purchase, we will email you with a prepaid shipping label and instructions. You’ll package your original BCM, attach the label, and send it to us. Once we receive it, we clone the data to the new module and ship it back to you, typically within 24-48 hours.
Is this truly plug-and-play? Will I need to program it?
Yes, this is a 100% plug-and-play solution. Because we transfer all the data from your original module, the replacement BCM is ready to install and operate without any need for dealer programming or key relearning.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is failing, we can still extract the necessary data. If your module is severely damaged (e.g., by fire or water), please contact us before ordering so we can discuss the situation.
Do I need to send my keys with the BCM?
No, you do not need to send your keys. All the necessary security information is stored within the BCM itself, which is what we transfer during the cloning process.
Will this fix my specific problem?
This part corrects issues caused by a faulty BCM. If your vehicle exhibits symptoms like erratic lights, locks, and communication DTCs, a failing BCM is the most likely cause. We always recommend a proper diagnosis by a qualified technician to confirm the BCM is the root of the problem.