Restore Your Vehicle’s Electrical System with a Plug-and-Play Solution
If you’re dealing with bizarre and frustrating electrical problems in your 2013 Cadillac SRX or another compatible GM vehicle, a failing Body Control Module (BCM) is often the culprit. As the central command center for your car’s body electronics—controlling everything from power windows and locks to interior lighting and security systems—its failure can cause widespread chaos. This isn’t just an inconvenience; it can affect vehicle function and safety. This listing offers a reliable, cost-effective solution: a replacement BCM that arrives at your door fully programmed and ready for installation.
Our professional cloning service makes this repair straightforward. Instead of towing your vehicle to a dealership for expensive diagnostics and programming, you simply ship us your original BCM. We then transfer 100% of its critical data—including the VIN, key information, and specific options—to this quality replacement unit. The result is a true plug-and-play module that restores your vehicle’s factory functions without any additional programming fees. It’s the most efficient way to get your car back to normal.
From the Diagnostic Bay: A Common BCM Failure Story
A customer brought in a 2013 Chevy Equinox with a list of strange issues: the radio would turn on and off by itself, the driver’s side power window wouldn’t work, and the dome light flickered constantly. They had already replaced the battery and checked fuses with no luck. After connecting my scan tool, I saw multiple U-codes (U0140, U0155) indicating a loss of communication with the BCM. This is a classic sign. By providing a cloned 2013 SRX Body Control Module (which also fits their Equinox), we bypassed the dealership and had them back on the road the same day the part arrived. The cloning process ensured all existing keys worked perfectly, saving them hundreds in programming and key replacement costs.
Is Your Vehicle Showing These Symptoms?
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Flickering or inoperative interior and exterior lights.
- ✔ The security system acting erratically or preventing the car from starting.
- ✔ Warning lights for various systems (like ABS or Airbag) appearing on the dash without a clear cause.
- ✔ Diagnostic trouble codes (DTCs) related to lost communication, such as U0140, U0141, or other B-series codes.
- ✔ Radio or climate control systems behaving unpredictably.
Your Straightforward BCM Installation Guide
Installing your programmed BCM is a manageable task for a confident DIYer or any professional technician. For the 2013 SRX, the BCM is typically located on the left-hand (driver’s) side of the dash.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down.
- Locate the BCM: Access the BCM, which is usually found behind the lower dash panel or kick panel on the driver’s side. You may need to remove some trim panels for access.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt or unclip the module from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed BCM in the same location. Reconnect all electrical connectors securely, ensuring they click into place.
- Reconnect Power: Reattach the negative battery terminal.
- Perform Post-Install Checks: Start the vehicle and test all body functions—windows, locks, lights, radio, etc. Please see the important notes below regarding potential follow-up procedures.
Important Post-Installation Information
In some cases, your vehicle may require a couple of simple recalibration procedures after the new 2013 SRX Body Control Module is installed. These are typically only necessary if specific warning lights appear.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: To ensure proper brake light and traction control operation, a brake pedal position sensor relearn might be required on certain models.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician for procedures specific to your vehicle.
Verified Compatibility for Your Vehicle
This BCM is a direct-fit replacement for a wide range of GM vehicles and is compatible with part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. Please verify your part number and check the list below:
- Cadillac SRX: 2013 (LH dash)
- Chevrolet Cruze: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited) (LH kick panel)
- Chevrolet Equinox: 2013-2017 (LH side dash)
- Chevrolet Malibu: 2013 (LH kick panel)
- Chevrolet Orlando: 2013-2014 (below center console)
- Chevrolet Spark: 2014-2015 (gasoline, left lower a-pillar)
- Chevrolet Trax: 2013-2014 (LH side of dash)
- Chevrolet Volt: 2013 (ID 13580697 or 13586273) (RH engine compartment)
- Buick Encore: 2013-2014 (LH side of dash)
- Buick Regal: 2013 (LH dash)
- Buick Verano: 2013-2017 (below center of dash)
- GMC Terrain: 2013-2017 (LH side dash)
Frequently Asked Questions About This 2013 SRX Body Control Module
How does the programming service work?
How does the programming service work?
After you place your order, we will contact you with instructions for shipping your original BCM to our facility. Once we receive it, we perform a full data transfer to the replacement module. We then ship the ready-to-install BCM back to you, typically within 1-2 business days, and provide you with tracking information.
Do I need to send my keys with the module?
How does the programming service work?
After you place your order, we will contact you with instructions for shipping your original BCM to our facility. Once we receive it, we perform a full data transfer to the replacement module. We then ship the ready-to-install BCM back to you, typically within 1-2 business days, and provide you with tracking information.
Is there a core charge?
How does the programming service work?
After you place your order, we will contact you with instructions for shipping your original BCM to our facility. Once we receive it, we perform a full data transfer to the replacement module. We then ship the ready-to-install BCM back to you, typically within 1-2 business days, and provide you with tracking information.
Will this fix my specific problem?
How does the programming service work?
After you place your order, we will contact you with instructions for shipping your original BCM to our facility. Once we receive it, we perform a full data transfer to the replacement module. We then ship the ready-to-install BCM back to you, typically within 1-2 business days, and provide you with tracking information.
What tools are required for the post-installation procedures?
How does the programming service work?
After you place your order, we will contact you with instructions for shipping your original BCM to our facility. Once we receive it, we perform a full data transfer to the replacement module. We then ship the ready-to-install BCM back to you, typically within 1-2 business days, and provide you with tracking information.