Is Your Vehicle Plagued by Electrical Gremlins?
If you’re experiencing a frustrating array of electrical issues in your 2013 Cadillac SRX or another compatible GM vehicle, the root cause is often a failing Body Control Module (BCM). This component acts as the central hub for your car’s body electronics, managing everything from your power windows and locks to interior lighting and security systems. When it begins to fail, it can create bizarre, intermittent problems that are difficult to diagnose, leading to costly and often incorrect repairs.
The Simple, Plug-and-Play Solution
Forget expensive dealership visits and the uncertainty of programming a new module. Our unique programming service provides you with a fully functional replacement BCM that is a direct, plug-and-play solution. We transfer the critical data from your original, failing BCM to a replacement unit. This cloning process ensures that the replacement module is perfectly matched to your vehicle’s specific configuration and options, eliminating the need for any additional programming or calibration upon installation. It’s the fastest and most reliable way to get your vehicle back to 100%.
From the Diagnostic Bay
We recently had a 2013 Chevy Equinox come in with a truly baffling set of symptoms. The owner reported that sometimes the radio wouldn’t turn off after opening the door, the dome lights would flicker randomly, and the key fob would only work intermittently. They had already replaced the battery and checked all the fuses. After connecting our diagnostic tool, we saw multiple communication errors pointing towards the BCM. Instead of a costly new module and hours of programming, we performed our cloning service. By transferring the data from his old module to a replacement, we had him back on the road in a fraction of the time and cost. The new module solved every single one of his intermittent electrical issues.
Common Failure Symptoms
- ✔ Power windows, locks, or mirrors operating erratically or not at all.
- ✔ Interior or exterior lights (headlights, dome lights, dash lights) staying on, flickering, or not working.
- ✔ The security system or alarm malfunctioning, or the vehicle not starting due to a security lockout.
- ✔ Key fob not being recognized or working intermittently.
- ✔ The radio or infotainment system behaving strangely (e.g., not turning off with the ignition).
- ✔ False warnings or error messages appearing on the instrument cluster.
- ✔ Wipers or turn signals not functioning correctly.
How Our BCM Programming Service Works
Our process is designed to be simple and straightforward, getting you the part you need without the hassle.
- Place Your Order: Purchase this BCM service. Please ensure your contact information is accurate.
- We Contact You: After your purchase, our team will reach out to you with detailed instructions and a shipping address for you to send your original BCM to us.
- Ship Your Original Module: Securely package your original BCM and ship it to our facility.
- We Program Your Replacement: Upon receiving your module, our expert technicians will professionally transfer all necessary data to the replacement unit.
- Receive Your Plug-and-Play BCM: We ship the programmed replacement BCM back to you, typically within 1-2 business days of receiving your original. We will provide you with tracking information as soon as it ships.
Installation and Post-Installation Checks
Installing your new 2013 SRX Body Control Module is a straightforward process. First, always disconnect the negative battery terminal before beginning work. The BCM is typically located on the driver’s side of the dash or in the kick panel. Carefully disconnect the wiring harnesses, remove the old module, and install the new one in its place. Reconnect the harnesses and the battery terminal. In most cases, the vehicle will start and function perfectly. However, please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is required. This syncs the airbag system with the new BCM and must be performed with a professional-grade scan tool.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be needed to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician if you are unsure about any part of the installation process.
Guaranteed Fitment and Part Number Compatibility
This service is compatible with a wide range of GM vehicles. This module will fit the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325. It is a direct fit for the following models:
- Cadillac SRX (2013)
- Chevrolet Equinox (2013-2017)
- Chevrolet Volt (2013)
- Chevrolet Cruze (2013-2016)
- Chevrolet Malibu (2013)
- Chevrolet Spark (2014-2015)
- Chevrolet Orlando (2013-2014)
- Chevrolet Trax (2013-2014)
- Buick Encore (2013-2014)
- Buick Regal (2013)
- Buick Verano (2013-2017)
- GMC Terrain (2013-2017)
Frequently Asked Questions
What exactly is a BCM cloning service?
It’s a process where we transfer the essential vehicle-specific data—like VIN, security information, and options—from your original Body Control Module to a replacement unit. This makes the replacement module a 100% plug-and-play part, avoiding the need for expensive dealer programming.
Do I need to get this module programmed by a dealer?
No. The entire point of our service is to handle the programming for you. The module you receive from us will be ready to install and use immediately, with no additional programming required.
How long does the entire process take?
Once we receive your original BCM, our technicians typically complete the data transfer service within 1-2 business days. The total time will depend on shipping times to and from our facility.
Is this a guaranteed fix for my vehicle’s problems?
This service corrects issues directly caused by a faulty BCM. While the symptoms listed are very common for BCM failure, we always recommend a proper diagnosis by a qualified mechanic to confirm the BCM is the source of your problems before ordering.
What if my original BCM is completely dead or missing?
Our cloning service requires a readable original module to extract the necessary data. If your BCM is missing, water damaged, or non-communicative, please contact us before ordering to discuss potential options.