Restore Your Vehicle’s Electrical System with a Perfectly Matched BCM
Are you dealing with baffling electrical issues in your 2013 Cadillac SRX? Flickering lights, malfunctioning power windows or locks, and persistent warning messages on the dash are classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it starts to fail, it can create a cascade of frustrating and unpredictable problems. Instead of facing a costly and complicated replacement at the dealership, our professional programming service offers a seamless and reliable solution.
We provide a replacement BCM that is precisely programmed with the data from your vehicle’s original module. This cloning process ensures that all your car’s specific features, security information, and VIN are transferred perfectly. The result is a true plug-and-play module, eliminating the need for expensive dealer-specific tools or programming appointments. This is the most effective way to get a fully functional 2013 SRX BCM without the hassle.
From the Diagnostic Bay: The Case of the Confused Cadillac
A customer brought in a 2013 SRX with a laundry list of complaints: the radio would randomly shut off, the key fob worked intermittently, and the ‘Service Stabilitrak’ light was on. They had already replaced the battery and checked all the fuses. A quick scan showed a dozen communication error codes (U-codes), pointing to a network issue. In my 20+ years of experience, this pattern almost always leads back to the BCM. It acts as a gateway for many systems, and when it fails, it floods the network with bad data, confusing other modules. By cloning his original BCM data to our replacement unit, we restored all functions in under an hour of shop time. It’s a textbook fix that saves customers hundreds compared to a new, un-programmed module from the dealer.
Is Your Vehicle Showing These Signs of BCM Failure?
A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following, it’s a strong indicator that your module needs attention:
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors not responding.
- ✔ Key fob or remote start system working intermittently or not at all.
- ✔ Dashboard warning lights (like Airbag, ABS, or Traction Control) staying on.
- ✔ Instrument cluster gauges behaving strangely or not working.
- ✔ Communication Diagnostic Trouble Codes (DTCs) such as U0140, U0155, or other U-codes.
- ✔ Vehicle security system issues or a no-start condition.
Your Straightforward BCM Swap Guide
Our cloning service makes the physical installation simple. Once you receive your programmed module from us, follow these general steps. The BCM in the 2013 SRX is typically located on the left (driver’s) side of the dash.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
- Access the Module: You will likely need to remove the lower dash panel or kick panel on the driver’s side to gain access to the BCM.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
- Reconnect Power: Re-attach the negative battery terminal.
- Verify Operation: Start the vehicle and test all body functions—lights, windows, locks, radio, and wipers—to confirm the repair was successful.
Important Post-Installation Information
While our programming makes this a plug-and-play repair, some GM vehicles require a final sync or relearn procedure for specific systems. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure the brake lights and traction control system function correctly.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step.
Will This Fit My Vehicle?
This BCM programming service is compatible with a wide range of GM vehicles. Please verify your part number and model from the list below. This module is a direct replacement for part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325.
- Cadillac SRX: 2013
- Chevrolet Cruze: 2013-2015, 2016 (Limited)
- Chevrolet Equinox: 2013-2017
- Chevrolet Malibu: 2013
- Chevrolet Orlando: 2013-2014
- Chevrolet Spark: 2014-2015 (Gasoline)
- Chevrolet Trax: 2013-2014
- Chevrolet Volt: 2013
- Buick Encore: 2013-2014
- Buick Regal: 2013
- Buick Verano: 2013-2017
- GMC Terrain: 2013-2017
Frequently Asked Questions About Our BCM Service
How does the programming service work?
After you place your order, we will provide you with instructions to ship your original BCM to us. Once we receive it, we extract the vehicle-specific data and flash it onto the replacement module. We then ship the ready-to-install BCM back to you.
Why is cloning better than buying a new BCM?
Cloning transfers your vehicle’s exact VIN, mileage, and optional feature data. This makes the replacement plug-and-play, avoiding the need for expensive and complex programming at a dealership, which is required for a brand new module.
Do I need to send you my key or any other parts?
No, we only need your original Body Control Module. All the necessary security data is stored within the module itself.
Is there a core charge for this 2013 SRX BCM?
No, there is no core charge. Our service price includes the replacement module. You are welcome to keep your original, non-working BCM.
What if my airbag light comes on after installation?
This is an occasional possibility on some GM models. It simply means the new BCM needs to be electronically introduced to the airbag module (SDM). A technician with a professional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.