Restore Your Vehicle’s Electrical System with a Plug-and-Play BCM
Are you dealing with baffling electrical issues in your 2013 Cadillac SRX? Flickering lights, unresponsive power windows, a security system that acts up, or warning lights that won’t go away are all classic signs of a failing Body Control Module (BCM). As the central command for your vehicle’s comfort and convenience features, a faulty BCM can make driving a frustrating experience. This isn’t just an inconvenience; it can affect vehicle security and safety systems. Forget the expensive dealership visits and the hassle of programming. We offer a straightforward, reliable solution: a replacement BCM with your vehicle’s original data cloned onto it.
The Smart Solution for Your 2013 SRX BCM
The BCM is the brain behind dozens of functions you use every day. When it fails, symptoms can be widespread and confusing. Instead of paying for hours of diagnostic time and a brand-new, unprogrammed module from the dealer, our service simplifies the entire process. We transfer the critical vehicle-specific data—like VIN, mileage, and key information—from your original BCM to this replacement unit. The result is a true plug-and-play module that restores function without needing any additional programming from a dealership or specialized technician. It’s the most efficient and cost-effective way to get your car back to 100%.
From the Diagnostic Bay: The Case of the Haunted Cadillac
A customer brought in a 2013 SRX with a list of complaints that sounded like the car was possessed. The radio would turn on and off, the driver’s side window wouldn’t work, and the alarm would randomly trigger overnight. They had already replaced the battery and checked fuses with no luck. I’ve seen this exact pattern hundreds of times. After hooking up my scan tool, I found multiple ‘U’ codes (communication loss) pointing to the BCM. Instead of a costly new module and programming, we used this exact cloning service. The customer mailed us their old BCM, we transferred the data, and sent the replacement back. They plugged it in, and every single issue was resolved instantly. It’s a testament to how effective this service is for both professional shops and DIYers.
Common Signs of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and interior/exterior lights.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Problems with the vehicle’s security system or remote keyless entry.
- ✔ Dashboard warning lights that stay on, such as for the airbag or traction control system.
- ✔ Diagnostic Trouble Codes (DTCs) related to communication loss, such as U0140, U0155, or other ‘U’ codes.
- ✔ A no-start condition where the engine cranks but won’t fire due to security system confusion.
A Straightforward Guide to Installation
- ✔ Step 1: Complete your purchase. We will contact you with instructions for shipping your original BCM to our facility. Please ensure your contact information is accurate.
- ✔ Step 2: Carefully remove your original BCM and ship it to us. The BCM in the 2013 SRX is typically located on the left (driver’s) side of the dash.
- ✔ Step 3: Once we receive your module, our technicians will professionally transfer all necessary data to the replacement unit within 1-2 business days.
- ✔ Step 4: We ship the ready-to-install, programmed BCM back to you and provide tracking information.
- ✔ Step 5: Disconnect your vehicle’s negative battery terminal. Install the replacement BCM, reconnect the battery, and start your vehicle. Your car’s functions should be fully restored.
Important Post-Installation Information
While our programming makes this a plug-and-play part, some GM vehicles may require minor relearn procedures after installation. These are simple for any qualified technician:
- Airbag System Sync: If the airbag light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This syncs the new BCM with the airbag system and requires a professional-grade scan tool.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to clear any traction control warnings.
Disclaimer: Specific procedures can vary. We always recommend consulting a factory service manual or a qualified technician if you are unsure about any step.
Verified Vehicle Compatibility
This module is a direct fit for units with part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, or 13589325 and is compatible with the following vehicles:
- Cadillac SRX: 2013 (Body Control; LH dash)
- Chevrolet Cruze: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited)
- Chevrolet Equinox: 2013-2017 (Body Control; LH side dash)
- Chevrolet Malibu: 2013 (LH kick panel)
- Chevrolet Orlando: 2013-2014 (Below center console)
- Chevrolet Spark: 2014-2015 (Gasoline model, left lower a-pillar)
- Chevrolet Trax: 2013-2014 (LH side of dash)
- Chevrolet Volt: 2013 (ID 13580697 or 13586273)
- Buick Encore: 2013-2014 (LH side of dash)
- Buick Regal: 2013 (LH dash)
- Buick Verano: 2013-2017 (Below center of dash)
- GMC Terrain: 2013-2017 (Body Control; LH side dash)
Frequently Asked Questions
How does the programming service work?
You purchase this listing and then ship your original BCM to us. We extract the vehicle-specific security and operational data from it and flash it onto the replacement module. We then ship the fully programmed, plug-and-play module back to you.
Do I need to go to the dealership for anything?
No! Our cloning service completely eliminates the need for dealer programming, saving you time and money. In rare cases, a simple relearn procedure may be needed as described above, which any competent mechanic can perform.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is failing, we can still extract the necessary data. Please contact us before ordering if your module is severely damaged by water or fire, or if it has no communication whatsoever.
How long does the service take?
Once we receive your original module, our turnaround time is typically 1-2 business days. We then ship the replacement back to you via the shipping method you select.
Is there a core charge?
No, there is no core charge for this service. You can keep your original module after we have completed the data transfer.