Restore Full Electrical Function to Your GM Vehicle
Are you battling a storm of bizarre electrical problems in your car? Flickering lights, malfunctioning power windows, a security system that has a mind of its own, or an engine that refuses to start can all point to a single culprit: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it malfunctions, it can create frustrating and seemingly unrelated issues. This programmed Body Control Module, part number 13586273, is the definitive solution for your 2013 Chevy Malibu and a wide range of other GM vehicles.
From the Diagnostic Bay
We recently had a 2013 Chevy Equinox in the shop with a classic case of BCM failure. The customer reported that the interior dome lights would stay on intermittently, draining the battery, and the remote key fob worked only half the time. They had already replaced the battery and checked all the fuses to no avail. A scan revealed multiple communication errors pointing towards the BCM. Instead of a costly trip to the dealer for a new module and programming, we used our cloning service. By transferring the data from their original faulty unit to this replacement, we had the Equinox back on the road the same day with all electrical systems operating perfectly. It’s a reliable fix that saves both time and money.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Headlights, taillights, or interior lights behaving erratically.
- ✔ The vehicle’s security system engaging randomly or preventing the car from starting.
- ✔ False warnings appearing on the instrument cluster (e.g., “Service Theft System”).
- ✔ Key fobs not being recognized or working inconsistently.
- ✔ Issues with the radio, climate control, or other interior accessories.
- ✔ A complete no-start condition where the starter does not engage.
The Simple, Plug-and-Play Solution: Our Cloning Service
Replacing a BCM isn’t as simple as swapping parts. A new module from the dealership requires expensive, vehicle-specific programming to sync with your car’s VIN, security system, and options. Our professional cloning service eliminates this step entirely. The process is straightforward:
- Place Your Order: Complete your purchase and we will contact you with shipping instructions.
- Ship Your Original BCM: Carefully package and send us your vehicle’s original BCM.
- We Handle the Programming: Our technicians will expertly extract the unique data from your module and flash it onto this replacement unit.
- Receive Your Ready-to-Install BCM: We ship the fully programmed module back to you. Installation is as simple as plugging it in, with no further programming needed.
Post-Installation Procedures
While our goal is a 100% plug-and-play experience, some vehicle systems may require a simple recalibration after the new 2013 Malibu BCM is installed. These are not programming steps but are sync procedures that can often be done with a high-quality diagnostic tool.
Airbag System Sync
If the airbag warning light is illuminated after installation, the ‘Setup SDM Primary Key in BCM’ procedure is necessary. This syncs the BCM with the airbag system’s Sensing and Diagnostic Module (SDM) to ensure safety system integrity.
Brake Pedal Position Relearn
In some cases, a brake pedal position sensor recalibration may be required. This ensures the brake lights function correctly and the traction control and stability systems receive accurate data from the sensor.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment for Multiple GM Models
This BCM is a direct replacement for several part numbers, including 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. It is confirmed to fit the following vehicles:
- CHEVROLET CRUZE: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited)
- CHEVROLET EQUINOX: 2013-2017
- CHEVROLET MALIBU: 2013
- CHEVROLET ORLANDO: 2013-2014
- CHEVROLET SPARK: 2014-2015 (gasoline model)
- CHEVROLET TRAX: 2013-2014
- CHEVROLET VOLT: 2013
- BUICK ENCORE: 2013-2014
- BUICK REGAL: 2013
- BUICK VERANO: 2013-2017
- CADILLAC SRX: 2013
- GMC TERRAIN: 2013-2017
Frequently Asked Questions
What is a BCM cloning service?
BCM cloning is a process where we transfer the vital, vehicle-specific information (like VIN, mileage, key data, and security settings) from your original Body Control Module to a replacement unit. This makes the replacement module plug-and-play, avoiding the need for expensive dealer programming.
Why do I need to send you my original BCM?
Your original BCM holds the unique digital fingerprint for your vehicle. We need it to extract this data to ensure the replacement module communicates perfectly with all other computers in your car, such as the engine computer and anti-theft system.
Is this module truly plug-and-play?
Yes, in over 99% of cases. Once we program the module with your car’s data, you simply need to install it. In rare instances, a secondary procedure like an airbag system sync or brake pedal relearn may be needed, which can be performed with a professional scan tool.
How long does the service take once you receive my module?
Our standard turnaround time for programming is 1-2 business days after we receive your original module. We will then ship the programmed replacement back to you, and tracking information will be provided at that time.
What if my original BCM is completely dead or unreadable?
In most cases, even if the BCM has failed, we can still extract the necessary data. If your module is severely damaged (e.g., by fire or water), please contact us before ordering to discuss potential options.