Restore Your Vehicle’s Electrical System with a Plug-and-Play Solution
Are strange electrical problems in your Chevrolet, Buick, or GMC causing constant frustration? Flickering lights, unresponsive power windows, random warning messages, or a security system that acts up are all classic signs of a failing Body Control Module (BCM). Don’t let these gremlins compromise your vehicle’s reliability. Get back to confident, everyday performance with our professionally programmed BCM, designed for a seamless installation.
Common Symptoms & Your Direct Solution
A faulty BCM can create a cascade of confusing issues. If you’re experiencing any of the following, this module is your definitive fix:
- Power windows, door locks, or mirrors working intermittently or not at all.
- Interior or exterior lights (headlights, taillights, dome lights) behaving erratically.
- Erroneous warning lights on the instrument cluster (e.g., security, airbag).
- Problems with the remote keyless entry system.
- Communication errors that prevent diagnostic tools from reading other modules.
This isn’t just a replacement part; it’s a complete, ready-to-install solution. We handle the complex programming by cloning the essential data from your original unit to this replacement 2013-2014 Orlando BCM 13589197, ensuring a perfect integration with your vehicle’s specific systems.
Features & Benefits
- โ Plug & Play Installation: Because we transfer all critical data from your original module, this BCM arrives ready to install without the need for expensive dealership programming or key relearning procedures.
- โ Cost-Effective Repair: Avoid the high costs and scheduling hassles of a dealership visit. Our cloning service provides a dealership-quality result at a fraction of the price.
- โ Guaranteed Compatibility: This module is a direct fit for a wide range of GM vehicles. Please see our comprehensive fitment list below to confirm compatibility with your exact model.
- โ Complete Data Transfer: We clone all essential information, including your vehicle’s VIN and security settings, to ensure all systems communicate correctly right out of the box.
- โ Peace of Mind Included: This unit is backed by our one-year replacement warranty.
From the Technician’s Bench:
A BCM acts as the central nervous system for your car’s body electronics. When it fails, the symptoms can seem completely random. We’ve seen cases where a faulty BCM caused an intermittent no-start condition that stumped other shops for weeks. The issue wasn’t the engine; it was the BCM failing to properly communicate with the immobilizer system. Our precise cloning process ensures this critical security handshake is preserved perfectly, solving the root cause of these frustrating electrical mysteries and restoring your vehicle’s dependability.
How Our Cloning Service Works
Our process is simple and designed to get you back on the road quickly:
- Purchase this Service: Complete your order through our secure checkout.
- We Contact You: We will reach out with clear, simple instructions for shipping your original BCM to our facility. Please ensure your contact information is correct.
- Send Us Your Module: Package your original BCM securely and ship it to us.
- We Program & Return: Once we receive it, our technicians will clone the data to the replacement module and ship it back to you, typically within 1-2 business days. We will provide you with tracking information as soon as it ships.
Fitment Information
This computer will fit the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
This part will fit these makes and models with these options
- EQUINOX 13-17 Body Control (BCM); (LH side dash), body control
- VOLT 13 Body Control (BCM); (RH engine compartment), ID 13580697 or 13586273
- CRUZE 13 Body Control (BCM); (LH kick panel), w/o opt ATH
- CRUZE 14-15 Body Control (BCM); (LH kick panel)
- CRUZE 16 Body Control (BCM); (LH kick panel), VIN P (4th digit, Limited)
- ENCORE 13-14 Body Control (BCM); (LH side of dash)
- MALIBU 13 Body Control (BCM); (LH kick panel)
- REGAL 13 Body Control (BCM); (LH dash)
- SRX 13 Body Control (BCM); (LH dash)
- SPARK 14-15 Body Control (BCM); (left lower a-pillar), gasoline model
- ORLANDO 13-14 Body Control (BCM); (below center console)
- VERANO 13-17 Body Control (BCM); (below center of dash)
- TRAX 13-14 Body Control (BCM); (LH side of dash)
- TERRAIN 13-17 Body Control (BCM); (LH side dash), body control
Important Post-Installation Notes
While our goal is a 100% plug-and-play experience, certain vehicle systems may require a quick sync procedure after installation. These do not require a trip to the dealer and can be performed with most professional-grade scan tools.
- Airbag System Sync: If the airbag warning light is on after installation, the ‘Setup SDM Primary Key in BCM’ procedure will need to be performed to sync the system.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be necessary on some models to ensure proper brake light and traction control function.
Frequently Asked Questions
How does this cloning service work?
It’s a simple mail-in process. After you purchase, we provide instructions to send us your original BCM. We then copy its unique data to the replacement unit and ship it back to you, ready to install.
Will I need to get this programmed by a dealer after I install it?
No. The entire purpose of our service is to handle all the programming for you. This module arrives ready for installation, saving you the time, cost, and hassle of a dealership visit.
What is the turnaround time?
Once we receive your original BCM, our programming and testing process typically takes 1-2 business days before we ship the replacement module back to you.
What if my original BCM is completely dead or water damaged?
Please contact us before ordering if your module has severe physical or water damage. In some cases, data recovery may not be possible. We can help assess the situation with you beforehand.
What does it mean if the airbag light is on after installation?
This is a known possibility on some GM models. It simply means the BCM and the airbag module (SDM) need to be electronically re-synced. This can be done with a ‘Setup SDM Primary Key in BCM’ procedure using a professional diagnostic tool.
How can I be sure this 2013-2014 Orlando BCM 13589197 will fit my car?
Please check the list of compatible part numbers and the detailed vehicle fitment list provided above. If your part number and vehicle are on the list, this is the correct solution for you.