Restore Your Vehicle’s Electrical System with a Plug-and-Play Solution
Are you dealing with baffling electrical issues in your Buick Encore or other GM vehicle? Intermittent power windows, flickering dash lights, a security system that acts up, or a car that refuses to start can all point to a single culprit: a failing Body Control Module (BCM). In my 20+ years of diagnostics, I’ve seen countless owners and shops waste time and money chasing these electrical gremlins, replacing batteries and switches when the BCM was the root cause. This module is the central hub for your vehicle’s body electronics, and when it fails, it creates chaos. We offer a straightforward, reliable fix: a professionally programmed 2013-2014 Encore BCM that arrives ready for installation, eliminating the need for expensive dealership programming.
Common Signs of a Failing GM Body Control Module
A faulty BCM can manifest in numerous ways that often seem unrelated. If your vehicle is experiencing any of the following, a failing BCM is the likely suspect. You may also see communication-related Diagnostic Trouble Codes (DTCs) like U0140, U0155, or other ‘U’ codes stored in the system.
- ✔ Power windows, door locks, or interior lights operating erratically or not at all.
- ✔ The security or anti-theft system light stays on, preventing the engine from starting.
- ✔ Horn honking unexpectedly or wipers activating on their own.
- ✔ Inconsistent instrument cluster operation, with gauges dropping out or warning lights appearing randomly.
- ✔ Communication failures with other vehicle modules, leading to a host of performance issues.
- ✔ Key fobs that suddenly stop working.
A Technician’s Notebook: The Cruze That Stumped a Shop
I got a call from a local repair shop that was at its wit’s end with a 2014 Chevy Cruze. The car had a no-start condition, and the anti-theft light was flashing. They had already replaced the ignition switch and even tried a new key, but nothing worked. After scanning it, they found a U0140 code—Lost Communication with Body Control Module. They suspected the BCM but were hesitant because of the dealer programming costs and hassle. I recommended our cloning service. They shipped us the original BCM, we transferred all the critical data to a replacement unit, and sent it back. They plugged it in, and the car fired right up. No programming, no key relearns. It turned a week-long headache into a simple, one-hour fix.
Our Simple Mail-In Cloning Process
Our service is designed to be as simple as possible for both DIY enthusiasts and professional mechanics. We transfer the vital data—like VIN, mileage, and key information—from your original BCM to this replacement unit. This makes the installation seamless.
- Purchase This Service: After you place your order, we will contact you with clear instructions for shipping your original BCM to our facility. Please ensure your contact information is correct at checkout.
- We Program Your Module: Once we receive your original BCM, our expert technicians will perform a full data transfer to the replacement module. This process retains all your vehicle’s unique settings.
- Install and Drive: We ship the programmed module back to you, typically within one business day of receiving your original. Simply install the replacement BCM, and you’re ready to go. No core charge means you can keep your original part.
Important Post-Installation Information
While our cloning service makes this a plug-and-play repair for most functions, some vehicle safety systems may require a quick sync-up procedure after installation. Please be aware of the following:
- Airbag System Sync: If the airbag (SRS) warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed. This requires a professional-grade scan tool to synchronize the new BCM with the airbag system. This is only necessary if the light appears.
- Brake Pedal Position Relearn: On certain models, the brake pedal position sensor may need to be recalibrated to ensure correct brake light and traction control operation. This is also performed with a diagnostic tool.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a qualified technician for your specific model’s procedures.
Verified Vehicle Compatibility
This BCM is a direct replacement for part number 13584695 and is also compatible with part numbers 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. It fits a wide range of GM vehicles:
- Buick Encore: 2013-2014 (LH side of dash)
- Buick Regal: 2013 (LH dash)
- Buick Verano: 2013-2017 (Below center of dash)
- Cadillac SRX: 2013 (LH dash)
- Chevrolet Cruze: 2013 (w/o opt ATH), 2014-2015, 2016 (Limited, VIN P) (LH kick panel)
- Chevrolet Equinox: 2013-2017 (LH side dash)
- Chevrolet Malibu: 2013 (LH kick panel)
- Chevrolet Orlando: 2013-2014 (Below center console)
- Chevrolet Spark: 2014-2015 (Gasoline model, left lower a-pillar)
- Chevrolet Trax: 2013-2014 (LH side of dash)
- Chevrolet Volt: 2013 (RH engine compartment, ID 13580697 or 13586273)
- GMC Terrain: 2013-2017 (LH side dash)
Frequently Asked Questions
What does ‘cloning’ mean for this BCM?
Cloning is the process of transferring all the essential vehicle-specific data (like the VIN, security information, and mileage) from your original BCM to this replacement unit. This makes the module plug-and-play, avoiding the need for expensive and complicated dealership programming.
Do I need to program this 2013-2014 Encore BCM?
No. Our service handles all the programming for you before we ship the part. You just need to install it in your vehicle.
How long does the service take?
We typically program and ship your replacement BCM within 24-48 hours of receiving your original module. You will receive a tracking number once it’s on its way back to you.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is failing, we can still extract the necessary data. Please contact us before ordering if your module is severely damaged by water or fire, or if you cannot communicate with it at all using a scan tool.
Is there a core charge?
No, there is no core charge for this service. We only need your original module to perform the data transfer. You are welcome to keep it afterward.