Restore Your Vehicle’s Electrical System with a Plug-and-Play Solution
Are you dealing with baffling electrical issues in your GM vehicle? Flickering lights, malfunctioning power windows, or random warning messages on the dash can be incredibly frustrating. Often, the culprit is a failing Body Control Module (BCM), the central hub for your car’s body electronics. Replacing it at a dealership can mean high costs and lengthy programming sessions. We offer a simple, reliable, and cost-effective alternative. This is a programming service for a replacement BCM that is a direct fit for part number 13584692 and others. By cloning the data from your original module, we deliver a plug-and-play unit, getting you back on the road without the dealership hassle.
Case Study: A Tricky Diagnosis
I recently had a 2012 Cadillac SRX in my bay with a laundry list of complaints from the owner. The dome lights would stay on, the driver’s side power lock was inoperative, and the remote start worked only half the time. The vehicle had multiple communication (U-series) diagnostic trouble codes stored, pointing to a network problem. After verifying the integrity of the CAN bus wiring, all diagnostic paths led to an internal failure in the 2012 SRX BCM. Instead of a costly new module and programming, we used our cloning service. The customer shipped us their faulty BCM, we transferred the data to a replacement unit, and shipped it back. The installation was a simple swap, and every single electrical gremlin was gone. It’s a perfect example of how this service saves time, money, and diagnostic headaches.
How Our BCM Programming Service Works
Our process is designed for simplicity and accuracy. After you place your order, we will contact you with detailed instructions for shipping your original BCM to our facility. Once we receive it, our expert technicians will extract the unique vehicle-specific data and transfer it directly onto a fully tested replacement BCM. This cloning process ensures that the replacement module is a perfect match for your vehicle’s VIN, options, and security settings. We then ship the ready-to-install BCM back to you, with tracking information provided. The result is a seamless repair that avoids any need for expensive dealer-specific tools or software.
Your Step-by-Step BCM Installation Guide
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
- ✔ Locate the BCM: On a 2012 SRX, the BCM is typically located behind the left-hand (driver’s side) of the dashboard. Consult a service manual for your specific model if you’re unsure.
- ✔ Remove Your Original BCM: Carefully unplug the electrical connectors. They have locking tabs that need to be released. Then, remove any bolts or clips securing the module and take it out of the vehicle.
- ✔ Ship Your Module to Us: Securely package your original BCM and ship it to us using the instructions we provide after your purchase.
- ✔ Install the Replacement: Once you receive the programmed BCM from us, simply mount it in the original location, plug in the connectors, and ensure it is secure.
- ✔ Final Check: Reconnect the negative battery terminal. Start the vehicle and test all functions controlled by the BCM, such as lights, locks, windows, and wipers, to confirm a successful repair.
Common Signs of a Failing Body Control Module
- ✔ Erratic or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights that flicker, stay on, or don’t work at all.
- ✔ The security system light is illuminated, and the vehicle may not start.
- ✔ Horn honking randomly or not working when pressed.
- ✔ Intermittent operation of the windshield wipers.
- ✔ False warning messages on the instrument cluster (e.g., “Service Theft System”).
- ✔ Stored diagnostic trouble codes (DTCs) related to communication, such as U0140, U0155, or other U-codes.
Important Post-Installation Information
In most cases, this module is fully plug-and-play. However, on some vehicles, additional steps may be required:
- Airbag System Sync: If the airbag warning light is on after installation, a technician will need to perform the “Setup SDM Primary Key in BCM” procedure with a capable scan tool to sync the modules.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor relearn to ensure correct brake light and stability control operation.
Disclaimer: Vehicle systems vary. Always refer to a factory service manual or consult a qualified professional for procedures specific to your vehicle.
Verified Fitment for Your General Motors Vehicle
This BCM programming service is compatible with units installed in the following vehicles, matching part numbers 13580696, 123589093, 13588446, 13584692, and 13583542.
- Buick LaCrosse: 2012 (ID 13580696), 2013
- Buick Regal: 2012
- Buick Verano: 2012
- Cadillac SRX: 2012 (ID 13580696)
- Chevrolet Camaro: 2012-2013, 2014 (Coupe)
- Chevrolet Equinox: 2012
- Chevrolet Spark: 2013
- Chevrolet Volt: 2012
- GMC Terrain: 2012
Frequently Asked Questions
How exactly does this cloning service work?
How exactly does this cloning service work?
You ship your original, faulty BCM to us. Our technicians use specialized equipment to read the unique programming and security data from your module and write it onto a fully functional replacement unit. We then ship the programmed replacement back to you, ready for installation.
Do I need to do any programming or visit a dealer after installation?
How exactly does this cloning service work?
You ship your original, faulty BCM to us. Our technicians use specialized equipment to read the unique programming and security data from your module and write it onto a fully functional replacement unit. We then ship the programmed replacement back to you, ready for installation.
What if my airbag light comes on after I install the new BCM?
How exactly does this cloning service work?
You ship your original, faulty BCM to us. Our technicians use specialized equipment to read the unique programming and security data from your module and write it onto a fully functional replacement unit. We then ship the programmed replacement back to you, ready for installation.
Is there a core charge or do I need to send my old part back?
How exactly does this cloning service work?
You ship your original, faulty BCM to us. Our technicians use specialized equipment to read the unique programming and security data from your module and write it onto a fully functional replacement unit. We then ship the programmed replacement back to you, ready for installation.
How long does the entire process take?
How exactly does this cloning service work?
You ship your original, faulty BCM to us. Our technicians use specialized equipment to read the unique programming and security data from your module and write it onto a fully functional replacement unit. We then ship the programmed replacement back to you, ready for installation.