Dealing with bizarre electrical issues in your 2012 Chevrolet Orlando? Flickering lights, malfunctioning power windows, or a security system that prevents your car from starting are classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, when the BCM goes down, it can feel like your car has a mind of its own. This isn’t just an annoyance; it can be a major disruption to your daily life. Dealerships often quote a small fortune for a replacement, which includes costly programming and requires you to tow your vehicle in.
We offer a smarter, more affordable solution. This is a fully tested, replacement BCM that comes programmed specifically for your vehicle. Our mail-in cloning service makes the process simple: after your purchase, you’ll ship your original BCM to us. We then transfer all the critical data—including key programming and vehicle-specific options—to this replacement unit. The result? A true plug-and-play module that restores full functionality without any need for dealer intervention. Get your Orlando back to perfect working order the easy way.
From the Diagnostic Bay: A 2012 Orlando’s Electronic Ghost
A customer brought in their 2012 Orlando with a list of complaints that sounded like a haunting. The radio would turn on and off, the interior lights would flicker randomly, and worst of all, the car would intermittently refuse to start, showing the security light. They had already replaced the battery to no avail. My scan tool pulled a series of communication codes, most notably a U0140 (Lost Communication With Body Control Module). After verifying the BCM’s power and grounds were solid, it was clear the module itself was failing internally. Instead of a costly new unit and programming, we used this exact cloning service. The customer mailed in their faulty BCM, we sent back the programmed replacement, and they installed it in under 30 minutes. The electrical gremlins were gone for good.
Common Signs of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and interior/exterior lights.
- ✔ The security or anti-theft light stays on, causing a no-start condition.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Wipers activating on their own or not responding to the switch.
- ✔ Communication-related Diagnostic Trouble Codes (DTCs) such as U0140, U0155, or other B-series codes.
- ✔ Inaccurate gauge readings on the instrument cluster.
Your Straightforward Installation Path
- ✔ Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- ✔ Locate the BCM: On the 2012 Orlando, the Body Control Module is typically found below the center console. You may need to remove trim panels for access.
- ✔ Disconnect and Remove: Carefully unplug all electrical connectors from the original BCM. Note their orientation. Then, unbolt the module from its mounting bracket.
- ✔ Install the New Module: Mount the replacement BCM in the same location and securely reconnect all electrical harnesses.
- ✔ Reconnect Power: Reattach the negative battery terminal.
- ✔ Verify Operation: Start the vehicle and test all related functions—lights, locks, windows, wipers, and radio—to confirm the repair is successful.
Verified Compatibility for Your Vehicle
This BCM is a direct replacement for several part numbers, ensuring a perfect fit for a wide range of GM vehicles. Please verify your original part number is on this list. This module fits part numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, and 13583451. It is compatible with the following models:
- Buick LaCrosse: 2011, 2012
- Buick Regal: 2011 (w/opt AUA)
- Cadillac SRX: 2011, 2012
- Chevrolet Camaro: 2011 (Convertible)
- Chevrolet Cruze: 2012
- Chevrolet Equinox: 2011
- Chevrolet Orlando: 2012
- Chevrolet Volt: 2011, 2013
- GMC Terrain: 2011
Important Post-Installation Note: In some cases, additional steps may be needed. If your airbag light is on, a professional scan tool is required for the ‘Setup SDM Primary Key in BCM’ procedure. Similarly, a ‘Brake Pedal Position Relearn’ might be necessary for proper brake light and traction control operation. Always consult a factory service manual for vehicle-specific details.
Frequently Asked Questions
How does the programming service work?
It’s simple! After you place your order, we will provide you with instructions to mail your original BCM to us. We then extract the unique data and transfer it to the replacement unit. This ‘cloning’ process ensures it’s a perfect match for your vehicle’s configuration.
Do I need to program this BCM at the dealer?
No. Because we clone the data from your original module, this replacement BCM is 100% plug-and-play. No expensive trips to the dealership for programming are required.
What is the turnaround time?
We typically program and ship the replacement module within 1-2 business days of receiving your original BCM. We will send you tracking information as soon as it’s on its way back to you.
Is there a core charge or do I need to return my old part?
There is absolutely no core charge. We only need your original module for the data transfer service. You can keep your original module after the service is complete.
What if my airbag light comes on after installation?
This can occasionally happen. It requires a simple ‘Setup SDM Primary Key in BCM’ procedure with a professional-grade scan tool to sync the airbag system with the new BCM and turn off the light.