Is Your Camaro Experiencing Bizarre Electrical Problems?
If your 2012-2014 Chevrolet Camaro is acting possessed, with flickering lights, malfunctioning power windows, or a security system that won’t cooperate, the culprit is often a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it starts to fail, it can cause a cascade of frustrating and seemingly unrelated issues. Finding a replacement is only half the battle; a new module from the dealership requires expensive and time-consuming programming to make it work with your specific vehicle. This listing offers a direct, hassle-free solution.
The Simple, Cost-Effective Solution for Your 2012-2014 Camaro BCM
This is not just a part; it’s a complete, ready-to-install service. We provide a quality replacement BCM that is programmed by transferring the critical data from your original, faulty module. This process, often called ‘cloning’, copies your vehicle’s unique VIN, mileage, and key information onto the replacement unit. The result is a true plug-and-play module that restores full functionality without any additional programming required. You get to skip the dealership appointment, avoid their high labor rates, and get your car back to normal quickly.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and interior/exterior lights.
- ✔ Instrument cluster gauges behaving strangely, flickering, or not working at all.
- ✔ The anti-theft or security system light is on, preventing the car from starting.
- ✔ Intermittent operation of windshield wipers or turn signals.
- ✔ False warning lights appearing on the dashboard (e.g., ABS, Airbag, Traction Control).
- ✔ Diagnostic scan tools are unable to communicate with the BCM or other modules.
- ✔ Key fobs stop working or work unreliably.
How Our Programming Service Works
Our process is designed to be as simple as possible for you:
- Place Your Order: Complete your purchase through our secure checkout.
- We’ll Contact You: Our team will reach out to you using the contact information on your order to provide shipping instructions for your original BCM.
- Ship Your Original Module: Carefully package and send your original BCM to our facility.
- We Program the Replacement: Once we receive your module, our technicians will professionally transfer all necessary data to the replacement unit, typically within 1-2 business days.
- Receive Your Ready-to-Install BCM: We ship the programmed replacement BCM back to you. You’ll receive tracking information as soon as it’s on its way. Installation is as simple as removing the old unit and plugging in the new one.
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, certain vehicle systems may require a recalibration or sync procedure after the new BCM is installed. These are standard procedures and can often be performed with a high-level diagnostic tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed. This syncs the airbag system (SDM) with the new BCM and will turn off the light. This is only required if the light comes on.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure the brake lights and traction control system function correctly.
Please note: Specific procedures can vary by vehicle. We always recommend consulting a factory service manual or a qualified technician for guidance.
Fitment and Part Number Compatibility
This service and module are a direct replacement for the following part numbers:
13580696, 123589093, 13588446, 13584692, 13583542
This part will fit these makes and models with these options:
- REGAL 12 Body Control (BCM); (LH dash)
- TERRAIN 12 Body Control (BCM); (LH side dash), body control
- SPARK 13 Body Control (BCM); (left lower a-pillar)
- CAMARO 14 Body Control (BCM); (RH dash), Cpe
- EQUINOX 12 Body Control (BCM); (LH side dash), body control
- SRX 12 Body Control (BCM); (LH dash), ID 13580696
- VERANO 12 Body Control (BCM); (below center of dash)
- VOLT 12 Body Control (BCM); (RH engine compartment)
- CAMARO 12-13 Body Control (BCM); (RH dash)
- LACROSSE 12 Body Control (BCM); (LH kick panel), ID 13580696
- LACROSSE 13 Body Control (BCM); (LH kick panel)
Frequently Asked Questions
What exactly is this service?
You are purchasing a replacement Body Control Module that will be programmed with your car’s specific data. To do this, you must ship your original BCM to us. We then transfer the data and ship the ready-to-install replacement back to you.
How long does the programming process take?
We typically complete the data transfer and programming within 1-2 business days of receiving your original module.
What if my original BCM is water damaged or completely unreadable?
If your module has severe physical or water damage, data recovery may not be possible. Please contact us before purchasing if you suspect your module is unreadable so we can discuss potential options.
Is this really plug-and-play? Will I need a mechanic?
Yes, the module itself is plug-and-play and will not require dealer programming. Installation is straightforward for those with mechanical experience. However, as noted, some vehicles may require a simple relearn procedure for the airbag or brake systems, which may require a professional scan tool.
Do I need to send my keys or ignition switch?
No. All the necessary security and key information is stored within your original BCM. We only need the module itself.
Is there a core charge?
No, there is no core charge for this service. We use your original module for data transfer only, and you are welcome to keep it.